BSOD within 30sec of Desktop Startup. Error: Registry_Error

[Gomolka]

I can't think of anything that changed between last night and tonight, but when I tried booting up my computer tonight I continuously got a BSOD within 30sec of logging into to my user and my desktop booting up. Interestingly, I did some troubleshooting and read about Avast possibly being the cause of the original error, which was PAGE_FAULT_IN_NONPAGE_AREA. After I uninstalled Avast, I still continued to get a BSOD, and with the same module ntoskrnle.exe (nt+ox735C0), but now with a second module ntkrnlmp.exe (nt!KeBugCheckEx+0x0) added to the equation. Also, the Error changed from the page fault error to REGISTRY_ERROR.

On Sun 8/30/2015 4:58:57 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\082915-70278-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x735C0)
Bugcheck code: 0x51 (0x1, 0xFFFFF8A000024010, 0x1D1B000, 0x374)
Error: REGISTRY_ERROR
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe registry error has occurred.
This bug check indicates there is a problem related to your registry.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Sun 8/30/2015 4:58:57 AM GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: ntkrnlmp.exe (nt!KeBugCheckEx+0x0)
Bugcheck code: 0x51 (0x1, 0xFFFFF8A000024010, 0x1D1B000, 0x374)
Error: REGISTRY_ERROR
Bug check description: This indicates that a severe registry error has occurred.
This bug check indicates there is a problem related to your registry.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

I've also tried booting with a single stick of RAM at a time to see if any one stick was faulty, but got the same error with every combination of RAM I tried. Attached is a ZIP that I was instructed to attach.

Again, I did not change ANYTHING between last night and tonight. Maybe a steam update or two, but that's about it.

 

[Gomolka]

Bump. Please help?

 

[essenbe]

Try doing a System Restore to a time before the problem began. http://www.sevenforums.com/tutorials/700-system-restore.html

Your Dump files cannot be read with a debugger. The indications are, as you said, a registry error. The only way to restore the registry is a system restore unless you backed up the registry beforehand.

This will list everything that can be done when Windows fails to boot. http://www.sevenforums.com/tutorials/219533-troubleshooting-windows-7-failure-boot.html
If you can, try booting into safe mode. http://www.sevenforums.com/tutorials/69585-safe-mode.html
If none of that helps, run Seatools for DOS to check the hard drive for errors. http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

If you need to, which I recommend, back up your user files to an external source. You can do that with the installation Disk, http://www.sevenforums.com/tutorials/93347-copy-paste-windows-recovery-console.html