BSOD within almost every startup

[Restart]

Okay so here's the deal, i've been having this trouble for a while and I haven't bothered much but now I really do want to fix it because it's getting real annoying. So, every time i start up the computer ex. in the morning it gives me a random BSOD the first time (It could be anything from bad pool header, system service exception and much more) so then i restart the computer (heh, fitting name aye?) and then it seems to work fine. What i've done is that i've tried the Verifier program inside windows to help troubleshooting, without much results (The computer gives no BSOD and just freezes). If someone could look at some of my minidump files and help me troubleshoot that'd be really appreciated because I'm tired of the bluescreens and I don't want anything to break! Thanks in forehand!

 

[koolkat77]

Allot of important info is missing from your zip, please follow http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html to grab all and upload a new report here.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.

• RAM - Test with Memtest86+

 

The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.

*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
​

If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.

*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
​

*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
​

3. Test the next stick of RAM (stick #2) in the next motherboard slot.

*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
​

*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
​

4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.

   Information

Errors are sometimes found after 8 passes.

   Tip

Memtest should be done overnight.