BSOD's and freezing only while in games

[markm1992]

So for the past 2 weeks or so my games have been freezing and an occasional BSOD. Recently it's been getting worse where 5 minutes into any game it freezes instead of freezing every 3-4 hours. I have tried a ton of things including:
-driver verifier
-uninstall recent programs/updates
-chkdsk
-disk defrag and cleanup
-running a game from a different hdd (although I have not re-installed windows on a different hdd)
-swapping sata cables and ports
-memtest (no errors after 4 hours or so)
-western digitals hdd checker thing (forgot name)
-tons of virus scans (bitdefender, malwarebytes, spybot search & destroy)
-rootkit scans
-unplugging things from my psu (bluray, cd/dvd, card reader)
-sfc scan
-prime95
-monitored temps of gpu and cpu (all good)

Here is my system:
graphics card- http://www.amazon.com/gp/product/B [...] 05_s00_i00
ram- http://www.amazon.com/gp/product/B [...] 06_s00_i00
primary hdd- http://www.amazon.com/gp/product/B [...] 06_s00_i00
monitor- http://www.amazon.com/gp/product/B [...] 02_s01_i00
mouse- http://www.amazon.com/gp/product/B [...] 02_s00_i01
keyboard- http://www.amazon.com/gp/product/B [...] 02_s02_i00
case- http://www.amazon.com/gp/product/B [...] 05_s00_i00
secondary hdd- http://www.amazon.com/gp/product/B [...] 06_s01_i01
mobo- http://www.amazon.com/gp/product/B [...] 06_s01_i02
cpu- http://www.amazon.com/gp/product/B [...] 06_s01_i04
psu- Ultra LSP 750Pro ATX PSU

Here is data from 2 recent minidumps.
If anyone has suggestions that would be awesome. I think I may need to replace my mobo but I'm not sure yet.
When I ran the wd hdd scanner it came up all clear and everything was fine.
When I ran chkdsk it came up with a ton of corrupt files, so I tried running a game from a different hard drive and still the same problem. (drive has no OS, I ran it from the same hdd with all game files installed on other hdd)

anyways here are the minidumps:

KERNEL_DATA_INPAGE_ERROR (7a) 
The requested page of kernel data could not be read in. Typically caused by 
a bad block in the paging file or disk controller error. Also see 
KERNEL_STACK_INPAGE_ERROR. 
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185, 
it means the disk subsystem has experienced a failure. 
If the error status is 0xC000009A, then it means the request failed because 
a filesystem failed to make forward progress. 
Arguments: 
Arg1: fffff6fc400060f0, lock type that was held (value 1,2,3, or PTE address) 
Arg2: ffffffffc000000e, error status (normally i/o status code) 
Arg3: 0000000114119860, current process (virtual address for lock type 3, or PTE) 
Arg4: fffff88000c1e93c, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address) 
 
Debugging Details: 
------------------ 
 
 
ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified. 
 
DISK_HARDWARE_ERROR: There was error with disk hardware 
 
BUGCHECK_STR: 0x7a_c000000e 
 
CUSTOMER_CRASH_COUNT: 1 
 
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT 
 
PROCESS_NAME: System 
 
CURRENT_IRQL: 0 
 
TRAP_FRAME: fffff88003199620 -- (.trap 0xfffff88003199620) 
NOTE: The trap frame does not contain all registers. 
Some register values may be zeroed or incorrect. 
rax=fffff88000c16500 rbx=0000000000000000 rcx=fffffa80074f2050 
rdx=fffffa80071feb10 rsi=0000000000000000 rdi=0000000000000000 
rip=fffff88000c1e93c rsp=fffff880031997b8 rbp=fffffa800a37b6f0 
r8=0000000000000007 r9=fffffa80074f21a0 r10=0000000000000000 
r11=fffffa80071fecb8 r12=0000000000000000 r13=0000000000000000 
r14=0000000000000000 r15=0000000000000000 
iopl=0 nv up ei ng nz ac po cy 
ataport!ChannelQueryDeviceRelations: 
fffff880`00c1e93c 4053 push rbx 
Resetting default scope 
 
LOCK_ADDRESS: fffff800038d5b80 -- (!locks fffff800038d5b80) 
 
Resource @ nt!PiEngineLock (0xfffff800038d5b80) Available 
 
WARNING: SystemResourcesList->Flink chain invalid. Resource may be corrupted, or already deleted. 
 
 
WARNING: SystemResourcesList->Blink chain invalid. Resource may be corrupted, or already deleted. 
 
1 total locks 
 
PNP_TRIAGE: 
Lock address : 0xfffff800038d5b80 
Thread Count : 0 
Thread address: 0x0000000000000000 
Thread wait : 0x0 
 
LAST_CONTROL_TRANSFER: from fffff80003747552 to fffff800036d9fc0 
 
STACK_TEXT: 
fffff880`03199308 fffff800`03747552 : 00000000`0000007a fffff6fc`400060f0 ffffffff`c000000e 00000001`14119860 : nt!KeBugCheckEx 
fffff880`03199310 fffff800`03700cbf : fffffa80`06d7e580 fffff880`03199480 fffff800`0390c540 fffffa80`06d7e580 : nt! ?? ::FNODOBFM::`string'+0x36bea 
fffff880`031993f0 fffff800`036e7589 : 00000000`00000000 00000000`00000008 ffffffff`ffffffff fffffa80`0e41bf68 : nt!MiIssueHardFault+0x28b 
fffff880`031994c0 fffff800`036d80ee : 00000000`00000008 fffff880`00c1e93c fffffa80`00000000 fffffa80`071feb10 : nt!MmAccessFault+0x1399 
fffff880`03199620 fffff880`00c1e93c : fffff880`00c1c4ce 00000000`00000000 fffff880`03199880 fffff800`037d15a0 : nt!KiPageFault+0x16e 
fffff880`031997b8 fffff880`00c1c4ce : 00000000`00000000 fffff880`03199880 fffff800`037d15a0 fffffa80`06b12ba0 : ataport!ChannelQueryDeviceRelations 
fffff880`031997c0 fffff800`03a8ffde : 00000000`00000000 00000000`00000000 fffffa80`0a37b6f0 fffff880`030a4180 : ataport!IdePortDispatchPnp+0x22 
fffff880`031997f0 fffff800`03a9034a : 00000000`00000000 fffffa80`0a37b6f0 fffff800`037d15a0 00000000`00000000 : nt!PnpAsynchronousCall+0xce 
fffff880`03199830 fffff800`03a92697 : fffff800`038d5940 fffffa80`06b16890 00000000`00000002 00000000`00000600 : nt!PnpQueryDeviceRelations+0xfa 
fffff880`031998f0 fffff800`03ac2c7c : fffffa80`06b16890 fffffa80`06b10020 fffffa80`06b16890 00000000`00000002 : nt!PipEnumerateDevice+0x117 
fffff880`03199950 fffff800`03ac3288 : fffff800`038d3500 00000000`00000000 00000000`00000001 fffff800`0393f5e8 : nt!PipProcessDevNodeTree+0x21c 
fffff880`03199bc0 fffff800`037d3ee7 : 00000001`00000003 00000000`00000000 00000000`00000001 00000000`00000000 : nt!PiProcessReenumeration+0x98 
fffff880`03199c10 fffff800`036e3641 : fffff800`037d3bc0 fffff800`039cc501 fffffa80`06a29000 fffffa80`06a29040 : nt!PnpDeviceActionWorker+0x327 
fffff880`03199cb0 fffff800`03970e5a : 00000000`00000000 fffffa80`06a29040 00000000`00000080 fffffa80`06a0cb30 : nt!ExpWorkerThread+0x111 
fffff880`03199d40 fffff800`036cad26 : fffff880`030a4180 fffffa80`06a29040 fffff880`030af040 00000000`00000000 : nt!PspSystemThreadStartup+0x5a 
fffff880`03199d80 00000000`00000000 : fffff880`0319a000 fffff880`03194000 fffff880`03199060 00000000`00000000 : nt!KxStartSystemThread+0x16 
 
 
STACK_COMMAND: kb 
 
FOLLOWUP_IP: 
ataport!IdePortDispatchPnp+22 
fffff880`00c1c4ce eb04 jmp ataport!IdePortDispatchPnp+0x28 (fffff880`00c1c4d4) 
 
SYMBOL_STACK_INDEX: 6 
 
SYMBOL_NAME: ataport!IdePortDispatchPnp+22 
 
FOLLOWUP_NAME: MachineOwner 
 
MODULE_NAME: ataport 
 
IMAGE_NAME: ataport.SYS 
 
DEBUG_FLR_IMAGE_TIMESTAMP: 4ce79293 
 
FAILURE_BUCKET_ID: X64_0x7a_c000000e_ataport!IdePortDispatchPnp+22 
 
BUCKET_ID: X64_0x7a_c000000e_ataport!IdePortDispatchPnp+22 
 
Followup: MachineOwner 
--------- 
 
2: kd> .trap 0xfffff88003199620 
NOTE: The trap frame does not contain all registers. 
Some register values may be zeroed or incorrect. 
rax=fffff88000c16500 rbx=0000000000000000 rcx=fffffa80074f2050 
rdx=fffffa80071feb10 rsi=0000000000000000 rdi=0000000000000000 
rip=fffff88000c1e93c rsp=fffff880031997b8 rbp=fffffa800a37b6f0 
r8=0000000000000007 r9=fffffa80074f21a0 r10=0000000000000000 
r11=fffffa80071fecb8 r12=0000000000000000 r13=0000000000000000 
r14=0000000000000000 r15=0000000000000000 
iopl=0 nv up ei ng nz ac po cy 
ataport!ChannelQueryDeviceRelations: 
fffff880`00c1e93c 4053 push rbx 
 
 
 
and the second one: 
5: kd> !analyze -v 
ERROR: FindPlugIns 8007007b 
******************************************************************************* 
* * 
* Bugcheck Analysis * 
* * 
******************************************************************************* 
 
CRITICAL_OBJECT_TERMINATION (f4) 
A process or thread crucial to system operation has unexpectedly exited or been 
terminated. 
Several processes and threads are necessary for the operation of the 
system; when they are terminated (for any reason), the system can no 
longer function. 
Arguments: 
Arg1: 0000000000000003, Process 
Arg2: fffffa8007d2eb30, Terminating object 
Arg3: fffffa8007d2ee10, Process image file name 
Arg4: fffff80003998460, Explanatory message (ascii) 
 
Debugging Details: 
------------------ 
 
 
PROCESS_OBJECT: fffffa8007d2eb30 
 
IMAGE_NAME: csrss.exe 
 
DEBUG_FLR_IMAGE_TIMESTAMP: 0 
 
MODULE_NAME: csrss 
 
FAULTING_MODULE: 0000000000000000 
 
PROCESS_NAME: csrss.exe 
 
EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x. 
 
BUGCHECK_STR: 0xF4_IOERR 
 
CUSTOMER_CRASH_COUNT: 1 
 
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT 
 
CURRENT_IRQL: 0 
 
STACK_TEXT: 
fffff880`07b1c0e8 fffff800`03a20822 : 00000000`000000f4 00000000`00000003 fffffa80`07d2eb30 fffffa80`07d2ee10 : nt!KeBugCheckEx 
fffff880`07b1c0f0 fffff800`039cce0b : ffffffff`ffffffff fffffa80`08f11060 fffffa80`07d2eb30 fffffa80`07d2eb30 : nt!PspCatchCriticalBreak+0x92 
fffff880`07b1c130 fffff800`0394bf04 : ffffffff`ffffffff 00000000`00000001 fffffa80`07d2eb30 00000000`00000008 : nt! ?? ::NNGAKEGL::`string'+0x176e6 
fffff880`07b1c180 fffff800`03698253 : fffffa80`07d2eb30 fffff800`c0000006 fffffa80`08f11060 00000000`00ec0e70 : nt!NtTerminateProcess+0xf4 
fffff880`07b1c200 fffff800`03694810 : fffff800`036e3b7f fffff880`07b1cb78 fffff880`07b1c8d0 fffff880`07b1cc20 : nt!KiSystemServiceCopyEnd+0x13 
fffff880`07b1c398 fffff800`036e3b7f : fffff880`07b1cb78 fffff880`07b1c8d0 fffff880`07b1cc20 00000000`00ec1a10 : nt!KiServiceLinkage 
fffff880`07b1c3a0 fffff800`03698642 : fffff880`07b1cb78 00000000`00011b1c fffff880`07b1cc20 00000000`00ec14e8 : nt! ?? ::FNODOBFM::`string'+0x488a4 
fffff880`07b1ca40 fffff800`036971ba : 00000000`00000000 000007fe`fd60d8c0 00000000`00000001 00000000`00011b1c : nt!KiExceptionDispatch+0xc2 
fffff880`07b1cc20 00000000`77199c12 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x23a 
00000000`00ec1430 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x77199c12 
 
 
STACK_COMMAND: kb 
 
FOLLOWUP_NAME: MachineOwner 
 
FAILURE_BUCKET_ID: X64_0xF4_IOERR_IMAGE_csrss.exe 
 
BUCKET_ID: X64_0xF4_IOERR_IMAGE_csrss.exe 
 
Followup: MachineOwner

I'm pretty knowledgeable with computers/components/command line/etc, but I'm still newish to troubleshooting and have only done a few things with reading minidump files.

Thank you in advance for anyone that can help.

 

[markm1992]

sorry i realize the links are broken here are the specs.
graphics card- Amazon.com: MSI Radeon HD 6950 2 GB GDDR5 2DVI/HDMI/2xMini DisplayPort PCI-Express Video Card R6950 TWIN FROZR III PE OC: Electronics
ram- Amazon.com: Kingston Technology HyperX 8 GB (2x4 GB Modules) 1600 MHz DDR3 Dual Channel Kit (PC3 12800) 240-Pin SDRAM KHX1600C9D3K2/8GX: Electronics
primary hdd- Amazon.com: Western Digital Caviar Black 750 GB SATA III 7200 RPM 64 MB Bulk/OEM Internal Desktop Hard Drive - WD7502AAEX: Electronics
monitor- Amazon.com: Viewsonic VX2450WM-LED 24-Inch (23.6-Inch Vis) Widescreen LED Monitor with Full HD 1080p and Speakers - Black: Computers & Accessories
mouse- Amazon.com: Logitech B100 Optical USB Mouse: Electronics
keyboard- Amazon.com: Logitech Keyboard K120: Electronics
case- Amazon.com: Thermaltake Armor A60 Gaming Mid-Tower Chassis with Cable Management Water Cooling SSD Support and Tool-Less Installation VM20001W2Z (Black): Electronics
secondary hdd- Amazon.com: Western Digital Caviar Green 2 TB Desktop Hard Drive WD20EARS: Electronics
mobo- Amazon.com: Gigabyte Socket AM3/AMD 890GX/SATA 3.0 and USB 3.0/A&V&GbE/ATX Motherboard GA-890GPA-UD3H: Electronics
cpu- Amazon.com: AMD Phenom II X6 1090T Processor, Black Edition (HDT90ZFBGRBOX): Electronics
psu- Ultra LSP 750Pro ATX PSU

 

[koolkat77]

Sounds like either of your hard drive looks like it's on its way out

DISK_HARDWARE_ERROR: There was error with disk hardware

Bug check F4 is usually related to storage/hard drive issues, bug check 7A is also related to hard drive

STOP 0x0000007A: KERNEL_DATA_INPAGE_ERROR : [URL="http://carrona.org/bsodindx.html#0x0000007A"]Source[/URL]
Usual causes:  Memory, Paging file corruption, File system, Hard drive, 
Cabling, Virus infection, Improperly seated cards, BIOS, Bad motherboard, 
Missing Service Pack

Run this tool and delete anything it finds:
→ Anti-rootkit utility TDSSKiller

Uninstall Bit Defender and Spybot S&D.
Run a full scan with MSE, Microsoft Security Essentials - Free Antivirus for Windows

Make a hard drive test from the hard drive manufacturers website

Run Disk Check on your hard disk for file system errors and bad sectors on it:
→ http://www.sevenforums.com/tutorials/433-disk-check.html

Hard drive test both short and long with:
→ SeaTools for Windows

Also the DOS version of:
→ SeaTools for DOS

You may also go through these
→ Hard Drive Diagnostic Procedure

and these
→ 7 Free Hard Drive Testing Software Tools

 

[beret21]

Windows might be giving problems . . . . .better install a new window in a other HDD and try running from that . . . Use 1 hdd at a time to check the individual one .........

 

[markm1992]

Thanks for the input. koolkat, I have ran all of those except for Microsoft Security Essentials. All came up that the HDD was fine except for dskchk came up with a ton of corrupt values. I haven't tried running it again, but I did find out that the games do not crash when I'm running graphics from my MOBO instead of my graphics card.
I will run another dskchk overnight and post the log here. I'll also try the seatools again and also post the log.

beret, I was going to try that, but it's kind of funny. I don't have a flash drive big enough or a blank dvd. I need to go to the store tomorrow to get a DVD. But thats my next step as well. I'll post logs and results of what happens tomorrow in the evening.

 

[markm1992]

Here is the chkdisk data. I'm running out to the store to grab a dvd to reinstall windows on. I'll post how that goes.

The type of the file system is NTFS.

A disk check has been scheduled.
Windows will now check the disk.

CHKDSK is verifying files (stage 1 of 5)...
371456 file records processed. File verification completed.
331 large file records processed. 0 bad file records processed. 2 EA records processed. 90 reparse records processed. CHKDSK is verifying indexes (stage 2 of 5)...
494014 index entries processed. Index verification completed.
0 unindexed files scanned. 0 unindexed files recovered. CHKDSK is verifying security descriptors (stage 3 of 5)...
371456 file SDs/SIDs processed. Cleaning up 123 unused index entries from index $SII of file 0x9.
Cleaning up 123 unused index entries from index $SDH of file 0x9.
Cleaning up 123 unused security descriptors.
Security descriptor verification completed.
61280 data files processed. CHKDSK is verifying Usn Journal...
34549936 USN bytes processed. Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
371440 files processed. File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
117565764 free clusters processed. Free space verification is complete.
CHKDSK discovered free space marked as allocated in the
master file table (MFT) bitmap.
CHKDSK discovered free space marked as allocated in the volume bitmap.
Write failure with status 0xc0000015 at offset 0xaea23d5e00 for 0x200 bytes.
The second NTFS boot sector is unwriteable.

Internal Info:
00 ab 05 00 b0 9a 05 00 4a f1 09 00 00 00 00 00 ........J.......
72 03 00 00 5a 00 00 00 00 00 00 00 00 00 00 00 r...Z...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................

Windows has finished checking your disk.
Please wait while your computer restarts.

 

[koolkat77]

Good Luck

 

[markm1992]

No luck with the Windows install on different HDD. Here is the dump file from the BSOD I received after 5 minutes of gaming. I'm thinking I may need a new MOBO, not sure though.
Any ideas???

3: kd> !analyze -v
ERROR: FindPlugIns 8007007b
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
 
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa8008ea6b30, Terminating object
Arg3: fffffa8008ea6e10, Process image file name
Arg4: fffff80002dce460, Explanatory message (ascii)
 
Debugging Details:
------------------
 
 
PROCESS_OBJECT: fffffa8008ea6b30
 
IMAGE_NAME: wininit.exe
 
DEBUG_FLR_IMAGE_TIMESTAMP: 0
 
MODULE_NAME: wininit
 
FAULTING_MODULE: 0000000000000000 
 
PROCESS_NAME: wininit.exe
 
EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.
 
BUGCHECK_STR: 0xF4_IOERR
 
CUSTOMER_CRASH_COUNT: 1
 
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
 
CURRENT_IRQL: 0
 
STACK_TEXT: 
fffff880`0a49bb08 fffff800`02e56822 : 00000000`000000f4 00000000`00000003 fffffa80`08ea6b30 fffffa80`08ea6e10 : nt!KeBugCheckEx
fffff880`0a49bb10 fffff800`02e02e0b : ffffffff`ffffffff fffffa80`070d8b50 fffffa80`08ea6b30 fffffa80`08ea6b30 : nt!PspCatchCriticalBreak+0x92
fffff880`0a49bb50 fffff800`02d81f04 : ffffffff`ffffffff 00000000`00000001 fffffa80`08ea6b30 0000007f`00000008 : nt! ?? ::NNGAKEGL::`string'+0x176e6
fffff880`0a49bba0 fffff800`02ace253 : fffffa80`08ea6b30 00000000`c0000006 fffffa80`070d8b50 00000000`00000026 : nt!NtTerminateProcess+0xf4
fffff880`0a49bc20 00000000`772615da : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`026cf9d8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x772615da
 
 
STACK_COMMAND: kb
 
FOLLOWUP_NAME: MachineOwner
 
FAILURE_BUCKET_ID: X64_0xF4_IOERR_IMAGE_wininit.exe
 
BUCKET_ID: X64_0xF4_IOERR_IMAGE_wininit.exe
 
Followup: MachineOwner
---------

 

[koolkat77]

How old is your current motherboard?
It could be the graphics card also. Did you try playing with another one?
Did you lower the settings of the games and see if it still BSoDs?
How many HDDs are you having actually?

 

[markm1992]

I have 2 HDD's. I tried playing with graphics at 1600x900 but it still BSoD'd. I will lower them more and take a look as well. I used to get BSOD's after a new graphics driver install, so I kept an old one that worked and then after about 5 more revisions I finally decided to give the new graphics driver a go. It started BSOD'ing a lot. So then I tried a bunch of things and it still BSOD'd. So I finally installed the old driver again and the BSOD's stopped for about 2 days. And then they came back and are very bad again. I just tried updating my graphics driver again today and no luck. I also ran Memtest tonight for 2 passes and nothing still. My MOBO is fairly new, I will try updating the BIOS tomorrow.
I bought the MOBO about 1 and a half years ago. I bought the graphics card a year ago.
I don't have another graphics card, but the on board graphics don't cause BSOD's. I think it's a MOBO compatibility thing with my card, but I'm really not sure. I will see if I can borrow a card tomorrow and see if that fixes anything.
I have 2 HDDs.
Tomorrows goals (if I have any time) are to run games at low settings, install a very old graphics driver and try it, and Possibly try flashing BIOS to the beta version (would you recommend this?)

 

[Britton30]

Hi, I would not use a Beta BIOS, they can cause more issues.
You should run memtest for a minimum of 7 passes, swapping the RAM in each slot and test separately.

Try running chkdsk /r from an elevated cmd prompt. You do have corrupted files. option Two here: http://www.sevenforums.com/tutorials/433-disk-check.html

Try this too. http://www.sevenforums.com/tutorials/700-system-restore.html#post4405

 

[beret21]

Well from above post its 95% that ur card is the main problem . . . .
If you have a friend nearby give him the card to check it on his pc !!!!!!!!!!!!!!!

 

[markm1992]

Yeah that's what I'm thinking Beret. I'm just trying to hide the fact that it's my card lol. Spent too much money on it and don't have the money to replace it.

Britton, I've ran chkdsk twice. I think I posted on of the log files in a previous post. Also, I don't have a restore point from before the BSOD's That was the first thing I was going to try but for some reason I didn't have any restore points.
I previously ran memtest for 8 passes and all was clear. I ran it last night for just 2 passes from a cd instead of from the new exe that they have and everything came up clear so I stopped it and went to bed.

I'm going to swap it with a buddies card and see if it works on his system and see if his works on mine.

Thanks for all the help and future help I'll definitely be asking for!

 

[Britton30]

Did the chkdsk come back clean this time? Does the sfc /scannow say No Integrity Violations found?

Make sure System Restore is turned on. Press tha w7 logo key and Pause/Break to open system Properties and in the left pane click Advanced system Settings.

In the next window highlight the drive your OS in on then Configure, check (tick) the first option in the next window. Under Disk Space Usage move the slider to at least 5%, , Apply, Apply, OK and reboot.

This setting allows 8 restore points for my system which has the OS on its own drive. You may need to set your to where you have 10GB allocated.

View attachment 236720

 

[markm1992]

Oh yeah mine was 1% I just changed it. thanks for the help with that.
Scannow said no integrity violations. Chkdsk came back with a few corrupt values. I'm pretty sure now though that its not the HDD because reinstalling Windows didn't work. (on a dif HDD).
I'm going to swap out my graphics card with my friends to check that. If that works then I will look into buying a new card. Also I'm going to put my card in his comp (if it fits lol) and if it works there then maybe I will just swap out my mobo which would be cheaper. I'll post on here tonight with updated logs from chkdsk and if I just talked to my buddy, tonight he's letting me use his card so I'll post that tonight as well how that went.

 

[koolkat77]

Did you run Sea Tools for DOS?

 

[Britton30]

Could you have two failing HDDs? there shouldn't be corrupt values on two of them.
Try one of these tests:
Hard Drive Diagnostic Procedure

 

[markm1992]

No only for Windows not seatools for DOS. But as I'm troubleshooting I am more and more confident that it's not my HDD's. I'll run the checks on the other HDD after I swap graphics cards and test that tonight. I doubt I have 2 failing HDD's when one is barely used. It's used as a backup that only gets used when I move a folder there.

 

[koolkat77]

Please do take sea tools for DOS.
We just want to make sure that it's not the hard disk/s

 

[markm1992]

Ok I'll do that for both hard drives tonight.