BSODs, need helping identifying cause - dumps included

[jon0705]

Is there anything i should do while the graphics card is taken out? it was fine a few weeks ago when i ran heaven benchmark, and furmark.

 

[MvdB]

Well, test the system with normal usage. I haven't checked the diff in specs between onboard graphics vs the card but just see how far you get. It is not about the quality of a game or its graphics now, it is about your HW setup being stable...

 

[jon0705]

Okay, well the card is out, has booted up as normal, will post back if anything happens, how long should i leave the card out for?

 

[MvdB]

Test and run normal for a day or two. If you get no more crashes... think about replacing the card.

 

[jon0705]

Okay, Could i use my old graphics card? the one i took out was a ati 6950, and my old one is a 5770

 

[MvdB]

I'd first test with onboard graphics. That rules out your card AND the mobo slot it was in. If you are sure that works...then you can try the second card and see if that runs ok. If it does...then probably the slot (and that second card) is ok too and it would look like your primary card ( the 6950) is indeed faulty.

 

[jon0705]

Ran for a day without a card, had my secondary card in since yesterday, had a blue screen a minute ago, will now run for longer / until a blue screen with no card at all. anyway, heres the dumps, same message i was having months ago, pfn lis corrupt.

 

[MvdB]

It is starting to look like a mobo problem. You've been switching cards in (I presume) the same slot?
Did you have a good look at that slot? Is it clean and are all connecting strips neat?
Do you have a second slot that you could try?

 

[jon0705]

Have had no cards in the pci slot since yesterday, and yeah its the same one. i booted up today and just had a black screen when i logged in saying a critical error had occoured windows was about to reboot. then it rebooted, and blue screened. Guess that rules out a faulty card? Think your right about the motherboard. Here are the dumps.

Also is there any way we can be sure it's the motherboard, i was hoping that the fact ive ran prime 95, and memtest for very long periods and taken the gpu out would rule of them out?

 

[MvdB]

Something is wrong with your wlan driver:

Log Name: System
  Source: Microsoft-Windows-WLAN-AutoConfig
  Date: 2011-09-10T11:23:47.901
  Event ID: 10000
  Task: N/A
  Level: Error
  Opcode: Info
  Keyword: N/A
  User: S-1-5-18
  User Name: NT AUTHORITY\SYSTEM
  Computer: jon-PC
  Description: 
WLAN Extensibility Module has failed to start.

Can you go in Devices and disable your wlan to test?

 

[jon0705]

I guess i wont be able to be online on this pc when i do, is there anything else i should do while its disabled?

Should i disabled both of these?

 

[MvdB]

Only the highlighted one. Don´t you have a wired lan that you could temporarily use?

Test for a while and hope this is it. If it is... we'll try to update drivers

 

[jon0705]

I dont unfortunately, i have removed all of the software and drivers, restarted and installed the latest, the wireless adapter was the last thing i added before i started getting the blue screens. If i get another blue screen, i will remove all of it and leave it.

 

[jon0705]

Bsod today after a couple of hours, i had re installed my wacom tablet as i had some work today, i downloaded the lastest drivers from the website, so i hope that mousefilter driver hasnt caused the crash again. says something about ntoskrnl.exe causing the crash.

have just noticed the dates of my drivers for the wacom dont match the date of the website, yet i downloaded the latest. confused. : /

 

[MvdB]

Nice bump!

It is your wacom stuff AFAIK..:

12/09/2011 15:44    Windows Error Reporting    Fault bucket 448789039, type 5
Event Name: PnPRequestAdditionalSoftware
Response: Not available
Cab Id: 0

Problem signature:
P1: x64
P2: HID\WACOMVIRTUALHID&Col01
P3: 6.1.1.0
P4: 0409
P5: input.inf
P6: *
P7: 
P8: 
P9: 
P10: 

Attached files:

These files may be available here:
C:\Users\jon\AppData\Local\Microsoft\Windows\WER\ReportArchive\NonCritical_x64_9048e432e142bfffa1baff95e7467fc08b7510_0344a390

Analysis symbol: 
Rechecking for solution: 0
Report Id: 0f07a17d-dd56-11e0-9807-bcaec5e01914
Report Status: 0
12/09/2011 15:44    Windows Error Reporting    Fault bucket 448789044, type 5
Event Name: PnPRequestAdditionalSoftware
Response: Not available
Cab Id: 0

Problem signature:
P1: x64
P2: HID\WACOMVIRTUALHID&Col02
P3: 6.1.1.0
P4: 0409
P5: input.inf
P6: *
P7: 
P8: 
P9: 
P10: 

Attached files:

These files may be available here:
C:\Users\jon\AppData\Local\Microsoft\Windows\WER\ReportArchive\NonCritical_x64_45f77d47de2c27eb706564e4ef9c54659d9e446_0850a362

Analysis symbol: 
Rechecking for solution: 0
Report Id: 0c0aba5c-dd56-11e0-9807-bcaec5e01914
Report Status: 0

Scroll to the middle to see...

And don't know how you managed to but it is the oldest possible driver:

wacommousefilter.sys Fri Feb 16 19:12:17 2007 (45D5F401)

If it ran well until you had to install this again.. you have your answer. Have a go at forcing an update of the drivers, if that doesn't work, check in with Wacom for newer and maybe W7 compatibility.

 

[jon0705]

Hhmm, this is odd, ive just installed the latest from the website again, ive gone to drivers folder to check the dates, this is what im seeing now. But in device manager, wacom HID digitizer and HID pen are from 2006,

 

[MvdB]

Did you try to update in Device manager, not letting it find its own but directing it to the file on your HDD?

 

[jon0705]

These where the only files i could find, nothing for wacom hid pen or wacom hid digitizer, maybe i should delete them?

 

[MvdB]

no. In Devicemanager choose to update driver and then choose to search on local harddisk (browse manually) .
See if it will update them to the 2010 ones if you locate these.

 

[jon0705]

Ahh okay, sorry. Scanned all of my HDD still says they're up to date

If i remember correctley it was the 2007 mousefilter.sys causing the problems, maybe now thats updated to 2010 it should fix the problem.

Was there anything up with ntoskrnl.exe?