Solved BSODs new Win732 on amd/nvidia chipset ck804 w fernandos drivers

[bam12]

thanks, writh
I really do appreciate you getting this info to me asap so i can continue working on it over the weekend.

 

[writhziden]

No problem. Let us know if you need any help as you proceed.

 

[bam12]

the imageres file coudln't be extracted over. i took ownership and set full control. i then tried copy /y in elevated cmd :

cannot be performed with user mapped section open

_____________________________

strangely the last file did not exist in either system directory or windows 7 install didk

 

[writhziden]

You may need to replace the files through the recovery environment. Use http://www.sevenforums.com/tutorials/666-advanced-boot-options.html to select Repair Your Computer and get to the http://www.sevenforums.com/tutorials/668-system-recovery-options.html. Then follow the steps to http://www.sevenforums.com/tutorials/93347-copy-paste-windows-recovery-console.html to replace the files.


I have attached the file you need: I should have noticed you have a 32-bit operating system. Your file structure will be somewhat different. The directory on your system is probably C:\Windows\winsxs\netfx-aspnet_common_sql_b03f5f7f11d50a3a_6.1.7600.16385_none_e30a73284d02ae8d


Also, not that I would give you an infected file, but just to be safe, since it is an unknown source, make sure to scan it with your antivirus prior to extracting it. Always scan unknown files with your antivirus prior to opening them; it is a good habit to get into.

 

[bam12]

thanks again, i will try this.
what about the start windows sound file? could not replace because mapped section open?
i will try this same approach on it and see if that works.

edit

all files copied. running verifier (all installed drivers) to stress test system today. i will post monday

 

[writhziden]

Replacing in the Recovery Environment should negate the mapped section being open. That was why I suggested that method.

 

[bam12]

yes that worked. sorry i wasn't clear.

i am running the verifier and sfc again to see if we caught everything. and reducing from four sticks/slots to two to test that

thanks. i will report back

 

[writhziden]

Alright, but be aware that with three changes made, Verifier may cause some false positive crashes, so it may not indicate anything wrong with your drivers. I should be able to tell if it is a likely false positive depending on the crash, though. We'll have to wait and see.

 

[bam12]

Writhziden

I started to run verifier awhile, knowing the crashes would occur intentionally, then changed my mind about the usefulness of it. After running both diskcheck and sfc with clean results, and using the pc for a day without any problems, i am hopefully calling this project a successful fix! I couldn't have done without your help (your other colleagues at 7forum too). Thank you Very very much.

Now, i am not sure exactly what to do about my memory sticks. despite memtest can't be 100% sure they weren't involved because as suggested i took 2 out to test just as we were completing the fixes. i didn't really establish they were bad. i still now have only 2 in orange (there are two orange slots and two purple & you have to use same-color slots in pairs). Can you advise me on testing and replacing my sticks without undoing this fix?

 

[writhziden]

Test the two modules you currently have for twice as long as it takes (on average) for a crash. If no crashes occur, test the other two slots with the modules currently in the system (again, twice as long as it takes on average for a crash). If no crashes still occur, test the other two modules the same way.

If you get crashes in two slots but not the other two slots with both sets of RAM, one of the slots on the motherboard may be bad. If you get crashes with two modules regardless of what slots, that set of RAM is likely bad.

 

[bam12]

ok. thanks, will post tomorrow.

 

[bam12]

crash. had to move sticks to the other slots. after all the detective work it may be either sticks or slots after all.

 

[writhziden]

Alright, thanks for keeping us updated. Best of luck tracking down which modules/slots work well.

 

[bam12]

Well after testing each kit-pair/slot combo could find nothing bad. So i put in both kits again and got BSOD bccode 1a memory mgt.

Before, when i was thinking about having to rma these i came upon a statement in the corsair website that - although their kits are tested to work together, combining kits may not work - requiring an adjustment in BIOS to decrease the DDR speed. do you think that could be my remaining problem?

thing is, i think my stem is underclocked already (i do not mess with that). my BIOS settings are all on AUTO and they are as follows: cpu frequency 200mhz, cpu/ddr clock ratio 2/1.66, ddr speed 333, cas latency 2.5, cpu vcore 1.400v, pcie clock 100mhz.

 

[writhziden]

Download and install CPU-Z and Upload screenshots of the CPU, Mainboard, Memory, and SPD tabs. In the SPD tab, upload an image of each slot.

Also, go into your BIOS and post all Voltages (CPU, RAM, NB, IMC, etc.) and all RAM settings (timings, frequency, etc.)

Thanks to Dave76 for help learning RAM Stability

 

[bam12]

having some problems getting slots 3/4 screenshot here's the rest for now

View attachment 213479

 

[bam12]

srry i am getting out of my league at this point



View attachment 213496

View attachment 213497[/ATTACH]

 

[writhziden]

I would recommend removing EasyTune6 and any other Gigabyte utilities you have installed. They do software overclocking of the hardware, and their interface with the hardware sometimes causes crashes. It would be a good thing to test.

Your settings do look good, by the way. Don't see any reason they would be causing problems...

 

[bam12]

i just installed that to get your screenshots.

so now, if all that looked good and we have exhausted drivers and bad windows files as causes, i cannot figure why it is crashing (it just did again).

here are the minidump files that you have not seen yet.

 

[writhziden]

Does it only crash when you have all four modules in, or did you get crashes with two in? Can you get the BIOS information I asked for (not through EasyTune6, write them down from the BIOS if needed).