BSOD's still rampant 0x1a 0x107e 0x24

[Grunter]

Hello Again,
Still getting blue screens and massive program crashing and errors, going from indexing to not even able to open the program.
BSOD's 0x1a, 0x107e 0x24
Today (aug 22) I swapped out the video card which had been considered the cause of the problem failing all stress tests and in fact not even allowing a new drive to get the drivers installed.

Have swapped Video
Have scanned HDD's via Chksk and Seatools 1.2.0.5 (since the current version has a JIT error and wont run)
Have scanned memory with the windows memory tool

Cannot scan via seatools for DOS or spinwrite because the drive is larger than 650gigs (size 2tb)
Cannot scan via memcheck because again amount of ram is too larg (32 gigs)

All except the previous video card passed clean with no problems. I have included the dump files

Any help appreciated.

 

[koolkat77]

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

systeminfo:
Please open an elevated (Run as administrator) Command Prompt and type (or copy/paste) "systeminfo.exe >%USERPROFILE%\Desktop\systeminfo.txt" (without the quotes) and press Enter. Then navigate to Desktop to retrieve the syteminfo.txt file. If you have difficulties with making this work, please post back. Then zip up the .txt file and upload/attach the .zip file with your next post.

 

[Grunter]

Well cannot do the 2nd part because upon boot got a BSOD 0x050, and then in reboot ended up getting some error about the profiles, so cannot run admin.

I really hope something comes to light its been a month of constant crashes BSOD's and trying to get anything done, till July the system was fine, solid and the only crashes were the wacom tablet driver.

Ive gone through RMA hd's but could not even install because of video crashing, have purchased and replaced video and still crashing, avg seemed a problem and removed it not sure what else can be flipping out. Im somewhat frustrated

 

[Grunter]

Rebooted and was able to get the system info

 

[koolkat77]

Please uninstall Zone Alarm and report results.

   Information

• :info: Download and install Revo Uninstaller free from here: Download Revo Uninstaller Freeware

Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:
Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Help protect your PC with Microsoft Security Essentials

Malwarebytes Free
:info: Do not start the trial version of MalwareBytes

You may also take a look at:
Good & Free System Security Combination

Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:

Click on the rb:
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow

Full tutorial here:
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

Run Disk Check on your hard disk for file system errors and bad sectors on it:
http://www.sevenforums.com/tutorials/433-disk-check.html
Follow these steps also.

Make scans with -
TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US

Online Virus Scanner Eset

 

[Grunter]

Ok before I uninstall ZoneAlarm may I ask why that would conflict?

 

[Arc]

Difficult to say why ... but it does, and it is doing for your case.

fffff880`035a7758  fffff880`05f948a1Unable to load image \SystemRoot\system32\DRIVERS\vsdatant.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for [URL="http://www.carrona.org/drivers/driver.php?id=vsdatant.sys"]vsdatant.sys[/URL]
*** ERROR: Module load completed but symbols could not be loaded for [URL="http://www.carrona.org/drivers/driver.php?id=vsdatant.sys"]vsdatant.sys[/URL]
 vsdatant+0x8d8a1

Description here : Driver Reference Table - vsdatant.sys

 

[Grunter]

After installing Zone alarm first boot pegged the CPU to 100% and could do nothing, hit reset, booted back in, and got BSOD 0x3b, successful boot after that crashed the wireless but it was recovered.
Installed malaware and running the scan.
The dump files are included

 

[Grunter]

Malaware found nothing
Scan

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection did not find any integrity violations.

 

[Grunter]

Also have done multiple drive checks, with the windows and seatools all drives are good

 

[Arc]

The display driver is failing here.

fffff880`0f7a93a8  fffff880`0764bdf1Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
 nvlddmkm+0x187df1

The latest version is known to be unstable in some cases. Install the 314.22 WHQL only.

• Uninstall All nvidia items in Control Panel > Programs and features
  • 3D Vision Control Driver
  • 3D Vision Driver
  • Graphics Driver
  • HD Audio Driver
  • PhysX
  • nvidia Update
  (Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
• Now follow Drivers - Clean Left over Files after Uninstalling
• Boot normally now. Go to Drivers - Download NVIDIA Drivers, Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
  
  

Also the Marvell 91xx SATA Controller Driver is very old there.

fffff880`01000000 fffff880`0108f000   mvs91xx    (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\mvs91xx.sys
[COLOR=Red]    Image name: mvs91xx.sys
    Timestamp:        Mon Sep 19 17:01:51 2011[/COLOR] (4E772827)
    CheckSum:         00050B0E
    ImageSize:        0008F000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

I would not suggest to update it. Uninstall Marvell Controllers in Control Panel > Programs and features and follow Drivers - Clean Left over Files after Uninstalling. It will free up the leftovers.

Now let us know the results.

 

[Grunter]

So... I dont update the driver? What do I do in that case? I am assuming there is a reason for it being there.
Also had a 0xf4 BSOD

Can all this be related to ram even if it has passed tests?

 

[Arc]

So... I dont update the driver? What do I do in that case? I am assuming there is a reason for it being there.
Also had a 0xf4 BSOD

Can all this be related to ram even if it has passed tests?

Yes, there is a reason there .... the reason is that the installation and setup was not done with proper care and intelligence.

Uninstall it as I suggested and report us back.

 

[Grunter]

Cannot install that driver, video card is not supported. Current video card is gforce 760

 

[Arc]

You are supposed to uninstall Marvell 91xx SATA Controller Driver.

If your GPU does not supposr 314.22; you may try 320.18 as an alternative. But that is also not stable.

 

[Grunter]

Thought you wanted me to uninstall nvidia drivers and revert to 314.22 as well
Sorry second line of your last post didnt show up