BSOS - running any task, w/random error codes

[ThatOneGuy97]

Newly rebuild PC, random BSOD doing almost anything. Please help!

 

[andrew129260]

Install any new hardware/software recently?

Were any driver updates installed recently?

 

[ICIT2LOL]

Guy97 mate reseat everything run this and check out the volts HWiNFO, HWiNFO32/64 - Download see pic and check inside the yellow circle.

But first get into safe made - if you can and run these

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html

PS volts should be within 5% of these

 

[ThatOneGuy97]

Install any new hardware/software recently?

Were any driver updates installed recently?

Yes, Its a new build... Everything got installed and updated. Its 4 days old today.


ICit2lol - I will look into that later.

 

[ThatOneGuy97]

Wasn't really sure what to do with this so ill just post it. Going to do the SFC Scan now. Will post results shortly.

 

[ICIT2LOL]

Ok mate those are fine and I was just thinking maybe you might have a lemon hard drive and it would do any harm running a test on it this will test most drives even though it is not the brand you have and at least it will eliminate that possibility. SeaTools for Windows | Seagate
There is another test you can do on it with this Best Free Partition Manager Freeware and free partition magic for Windows 7, Windows 8, Windows Vista and Windows XP 32 bit & 64 bit. MiniTool Free Partition Manager Software Home Edition. it does an actual physical surface test and I know it is a very slim possibility of it being the problem again it will eliminate it. (see pic)

Oh and run the chkdsk too and maybe Option 2 may be required.

 

[ThatOneGuy97]

i have run multiple hardware tests today and yesterday. Everything came back as passed. I have noticed that it doesn't BSOD unless i try to play Counter Strike: GO. About 2 minutes from loading the game, it will BSOD. I get check code 0x00000124, file name hal.dll and ntoskrnl.exe Addresses: hal.dll+12a3b ; ntoskrnl.exe+18c463 Not sure if that helps. I had tried to "tune" the computer with Asus' AISuite3. Then started to have problems so I went into the BIOS and set everything back to default. Still not sure what else to do.

 

[ICIT2LOL]

This game That Guy sounds like it has been corrupted maybe you need to reinstall it.