Solved Canoscan LiDE 35 Windows 7 64bit driver

[scoutfu]

Just a quick question Cubic as I am off to bed now...

After installing the Toolbox software, did you reboot your pc?

 

[Michelle Gene]

Yes, thought it was the wise thing to do. The tool box works fine. Just not used to the Canon as I have been using HP 3500c for the past 10 years. HP software gives you a preview of the scan to modify and crop. Have not seen that with the Canon. Would love a 7-64 driver for that!!

 

[scoutfu]

HP software gives you a preview of the scan to modify and crop. Have not seen that with the Canon. Would love a 7-64 driver for that!!

With the Toolbox on the Canon, you can set where the scan is sent. I usually send it to Photoshop, from there you can do whatever you want with it!

Regarding the 7-64 driver for the HP, did you even try the Vista one .... using the original post method?

 

[Cubic]

scoutfu,
Rebooting did not make the scanner work. During the trial & error, I don't know how many times I rebooted the PC.
One question, scoutfu, does your scanner operate with Windows built-in module (Windows Fax&Scan)?
I also thought about getting HP scanner software, but I am kind of giving up.

By the way, I confirmed the functionality of the scanner itself with another PC with XP.

Thank you very much for your reply

 

[scoutfu]

Cubic,

I'm afraid I lent my scanner to a friend months ago and haven't seen him since, so I cannot tell you at this time. I am hoping to get it back soon though.

I have just read that errors like 'This action cannot be completed because the other program is busy' can be caused by an error in the registry.

Could you try uninstalling the Toolbox software, then scan the registry for errors. I use a program called Windows 7 Manager, if you do not have such software.
Run the Registry Cleaner app, make a backup, do a scan, delete what comes up, then scan again, just to make sure, then reboot.

Then i was thinking that maybe you could try a newer version of the Toolbox software: CanoScan Toolbox 5.0.1.2a

No idea if i've tried this version myself but it can't hurt to try.... or try the old one.

I've sent you a pm, btw

 

[Cubic]

scoutfu,
Sorry, I do not know what PM is. I received a notification to my email that you posted a comment. Is that it?

I tried Toolbox 5.0.1.2a. It did not give me error messages other than Twain thing. I don't know if we made a progress...
I thought about trying other scanner tools from another vendor, but I have a feeling that since all just handles twain driver, it won't make any difference.

I will try registry cleaner. Or maybe this weekend, I can try on a virtual machine with a fresh Windows7.
Will it ever end???

Thanks for your advice.

 

[scoutfu]

Private message Cubic :shock: Top Left

 

[pjanak]

Nope Even when just using the toobox software An error message came up. Can't remeber what it was. I'll have to reinstall toolbox and let you know

 

[scruffy1]

beware the win 7 64 bit service pack 1 !

you get to reinstall the drivers as originally described... but at least it still works perfectly

 

[atakus]

Win 7 64 Pro SP1 - works perfectly!

Scoutfu,

Just registered to say thanks!

I just set up my new win 7 pro 64 rig today.

Your instructions are perfect for getting the scanner (Lide 35) working with win 7 64 (on first try). Software appears to be better than the one I had on XP as well.

Thanks again!

 

[Thomas71]

Thank you for this help!

Hi scoutfu,

thank you very much for your effort! I had the same problem with the same scanner. I was following your guideline, now it works perfectly, and I'm simply happy.

Best regards,

Thomas

 

[cyclone22]

Thank you very very much!!

 

[errenn]

Many thanks and very much "thank you"s for this !





Finally the scanner is working fine . . .

 

[JH55]

Canoscan LiDE 35 on Win 7 x64

Hi,

I figured out how to get this scanner to work in Vista 64 about a year ago and have now got it working in Windows 7 x64. So in case you didn't see my Vista post i thought I'd post it in here also.

It uses the Canoscan LiDE 60 scanner 64bit driver:

Use Winrar, right click the file and select Extract to lide60vst6411111a_64en\

Open the folder it creates 'ide60vst6411111a_64en'

Inside the folder you'll find SetupSG.exe, extract it the same way again and you will find the driver

Scoutfu,

I downloaded Winrar but what 'file' do I right click on ? to select Extraxt to lide60 etc

I also downloaded the LiDE 60 driver

I followed the Device Manager bit OK but when I browsed the Have Disk no CNQL60.INF file to be found, no SetupSG folder to be found

Help please !

 

[scoutfu]

Scoutfu,

I downloaded Winrar but what 'file' do I right click on ? to select Extraxt to lide60 etc

I also downloaded the LiDE 60 driver

I followed the Device Manager bit OK but when I browsed the Have Disk no CNQL60.INF file to be found, no SetupSG folder to be found

Help please !

You have downloaded 2 files...

1. Winrar <- Install this
2. The Driver (lide60vst6411111a_64en.exe)

Use '1' to extract '2'

Open the folder it creates and....

Use '1' to extract 'SetupSG' <- The driver is in there!

 

[JH55]

Scoutfu,

My scanner now makes all the right noises when I start up as though it is now connected/working but when I try to use it I get a box up that says "There is no application registered for this event"

Any ideas ? I think I did everything right but perhaps not ?

 

[JH55]

plus, when I open Devices & Printers, Canoscan is no longer there, when it was before ?

 

[JH55]

Canoscan Lide 35 on Windows 7 x64

Scoutfu, what can I say, THANKYOU, I went back over your instructions & found I had missed downloading the CanoScan Toolbox ( I too am a silver surfer), having done this my LiDE 35 is now working sweetly, you are a legend, thanks.

 

[Fiedelg]

Canon ir1570f

Hi All,
I am having difficulty installing my canon ir1570 printer on my laptop with a windows 7 64 bit o.s. I have tried all drivers from canon and their website but none works. I have tried manual installation, but windows update does not update with this printer model. Please help somebody.

 

[makinsushi]

So cloooose

Aghhh

I tried following your instructions and I think the driver installed fine.

But when I get into Toolbox to scan, it lets me select lide60 as the scanner and when I press SCAN, it says "Unable to select TWAIN source".

What does this mean and how can I remedy this?

Please help D: