can't access Windows Update in Control Panel

[madhg]

When I select Windows Update in Control Panel, it just hangs, showing a blank window, and the pointer has an hourglass attached to it. (hourglass, not circle). I can get rid of it using Task Manager.

The other parts of Control panel work OK.

I'm also having trouble waking the system after it's gone to sleep. Have to resort to a long press of the power button, which switches it off. This started a week or so ago, but I only now discovered the problem with Windows Update. Maybe the problems are somehow related?



Any ideas?

 

[richc46]

Try to delete all your temporary files. The update should begin to work.

My computer.....right click on c drive....properties.......disk clean up.


Then

Start Internet Explorer.
On the Tools menu, click Internet Options, and then click the General tab. then clear browing history.

 

[madhg]

Thanks for your reply, Richard. I did as you suggested; didn't help, I'm afraid.

best wishes,
David

 

[richc46]

If the problem just started, you can do a system restore.

You may want to look at this first


http://www.updatexp.com/0x800A138F.html

The answer is for a specific problem, but the answers will fix many problems with update.

In help and support, by start, by start menu, there are many different scenarios of update problems.

Make sure that it is turned on.

Finally try in an administrator account type cmd in search in cmd type sfc /scannow

 

[richc46]

I posted, and then edited above. Please check. I think we will get this fixed.

 

[madhg]

Thanks for your advice. I can now see Windows Update, but system is still flaky, had a couple of blue screen crashes. Before reading your second, detailed, posting, I tried System Restore, but it failed.

I'll read your posting carefully, also other postings about failure of System Restore. Am busy with other things right now, but will tackle the problem early next week.

Thanks again,
David

 

[Flavius]

Thanks for your advice. I can now see Windows Update, but system is still flaky, had a couple of blue screen crashes.

1.Go to C:\Windows\Minidump and attache to post *.DMP files.
2.Run again cmd.exe and type:

findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >%userprofile%\Desktop\sfcdetails.txt


on your desktop appear sfcdetails.txt file -this file attache to post too

 

[madhg]

1.Go to C:\Windows\Minidump and attache to post *.DMP files.
2.Run again cmd.exe and type:

findstr /c:"[SR]" %windir%\logs\cbs\cbs.log >%userprofile%\Desktop\sfcdetails.txt


on your desktop appear sfcdetails.txt file -this file attache to post too

Thanks for this reply, Flavius.

1. C:\Windows\Minidump seems to be empty. No files are shown; I have an administrator a/c; I didn't find a "show hidden files" option.

2. CBS.log is not a text file: it doesn't open in a text editor, and the findstr command produced an empty file sfcdetails.txt.

CBS.log is 2.7MB, too large to upload. You might not welcome an upload of a file of dubious type anyway!

[Edited 22.09 GMT: I've scheduled a disk scan on the next boot. If that doesn't turn up anything, I think I'll take the time to reinstall Windows from scratch]

David

 

[Flavius]

1. C:\Windows\Minidump seems to be empty. No files are shown; I have an administrator a/c; I didn't find a "show hidden files" option.

If you had BSODs and neverless this folder you have empty then probably you have incorrect set pagefile.Restore defaultly settings for pagefile.sys file or use DumpConfigurator to set if you don't wish defaultly settings Windows Platforms Tools

2. CBS.log is not a text file: it doesn't open in a text editor, and the findstr command produced an empty file sfcdetails.txt.

CBS.log is 2.7MB, too large to upload. You might not welcome an upload of a file of dubious type anyway!

CBS.log should be able to open in text editor as well although many times it is huge-never mind.If you have sfcdetails.txt empty that means you didn't run sfc /scannow command before,I thought you did already.First you have to run SFC command and next generate sfcdetails.txt as I said in my previous post

 

[madhg]

OK, I had tried sfc /scannow but it did not work: it gave a message that it can only by used by an administrator. But there is only one user account on this machine, and it is an admin. a/c. I don't know what's going on there. Maybe another effect of the flakiness of my system?

I ran a full disk check at boot, and it found no errors or problems

I looked in the event viewer and found some system errors. For example:

The driver detected a controller error on \Device\Harddisk1\DR1.
Details:
+ System - Provider [ Name] Disk
- EventID 11 [ Qualifiers] 49156
Level 2 Task 0 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2010-01-04T12:31:14.725049600Z
EventRecordID 70809 Channel System Computer Acer-Laptop Security
- EventData


\Device\Harddisk1\DR1


0E00680001000000000000000B0004C003010000000000000000000000082D0000000000000000009F34010000000000FFFFFFFF0600000040000000000000000000061208000010000000003C0000000000000040D0FA8800000000507B4A89000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Binary data:

In Words
0000: 0068000E 00000001 00000000 C004000B
0008: 00000103 00000000 00000000 002D0800
0010: 00000000 00000000 0001349F 00000000
0018: FFFFFFFF 00000006 00000040 00000000
0020: 12060000 10000008 00000000 0000003C
0028: 00000000 88FAD040 00000000 894A7B50
0030: 00000000 00000000 00000000 00000000
0038: 00000000 00000000 00000000 00000000
0040: 00000000 00000000 00000000 00000000

In Bytes
0000: 0E 00 68 00 01 00 00 00 ..h.....
0008: 00 00 00 00 0B 00 04 C0 .......À
0010: 03 01 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 08 2D 00 ......-.
0020: 00 00 00 00 00 00 00 00 ........
0028: 9F 34 01 00 00 00 00 00 Ÿ4......
0030: FF FF FF FF 06 00 00 00 ÿÿÿÿ....
0038: 40 00 00 00 00 00 00 00 @.......
0040: 00 00 06 12 08 00 00 10 ........
0048: 00 00 00 00 3C 00 00 00 ....<...
0050: 00 00 00 00 40 D0 FA 88 ....@Ðúˆ
0058: 00 00 00 00 50 7B 4A 89 ....P{J‰
0060: 00 00 00 00 00 00 00 00 ........
0068: 00 00 00 00 00 00 00 00 ........
0070: 00 00 00 00 00 00 00 00 ........
0078: 00 00 00 00 00 00 00 00 ........
0080: 00 00 00 00 00 00 00 00 ........
0088: 00 00 00 00 00 00 00 00 ........


I don't know whether to take this literally as evidence of a hardware fault.


Thanks for the suggestion of changing pagefile settings, but I think I don't know enough to do that confidently.


So I think I'll stop trying to fix it, live with it for the immediate future, and some time soon reinstall back to factory settings and see how that goes.

 

[Flavius]

OK, I had tried sfc /scannow but it did not work: it gave a message that it can only by used by an administrator. But there is only one user account on this machine, and it is an admin. a/c. I don't know what's going on there. Maybe another effect of the flakiness of my system?

You didn't elevate command prompt before .Even if you are on admin account Vista/Win 7 never defaultly run conole with admin rights,extra special step is needed
http://www.sevenforums.com/tutorials/783-elevated-command-prompt.html

I ran a full disk check at boot, and it found no errors or problems

I looked in the event viewer and found some system errors. For example:

The driver detected a controller error on \Device\Harddisk1\DR1.

Hm...I don't know what think about this error,it is important or to ignore.For sure use better tool to diagnose your hdd.Maybe you have already tool to diagnose your hdd,check it in your computer manual or from here Bootable Hard Drive Diagnostics - Vox choose tool appripriate for your model