changing system boot

arshok

New member
Local time
3:23 PM
Messages
5
hi
i must changed my windows disk but cant reinstall windows
so i get backup from c drive with acronis and recover it in diffrent disk
now my problem is changin boot system and etc
this is my disk managment photo

i wanna remove disk0 from my pc and make e drive to windows drive
plzz help
 
Last edited by a moderator:

My Computer

Computer type
PC/Desktop
OS
Windows 7 Ultimate x64
Untitled.jpg
 

My Computer

Computer type
PC/Desktop
OS
Windows 7 Ultimate x64
Does E already have Win7 on it? If so Mark Partition Active, power down to unplug Disk0, plug its cable into Disk1 to make it Disk0, then run Startup Repair - Run up to 3 Separate Times until Win7 starts and E is marked System Active.

If you recover to E using a backup image, then specify during the recovery process to make it Active and copy Track0 to make it bootable. You may still need to confirm Active partition and run Startup Repairs to get it to boot.

I would not have Win7 on the right side of the HD as it's deliberately placing it as far away from the disk reader as possible, when by placing it on the left hand side of the HD it will be closer to where the reader is located.

If you're interested in having a perfect install of Win7 the steps are compiled in Clean Reinstall - Factory OEM Windows 7 and are the same for retail.
 
tnxx for reply,another problem that my dvd rom is broken,i mus boot it with flash stick,i will figur somthin,tnxx anyway
 

My Computer

Computer type
PC/Desktop
OS
Windows 7 Ultimate x64
tnxx for reply,another problem that my dvd rom is broken,i mus boot it with flash stick,i will figure out somthin,tnxx anyway
 

My Computer

Computer type
PC/Desktop
OS
Windows 7 Ultimate x64
tnxx buddy
 

My Computer

Computer type
PC/Desktop
OS
Windows 7 Ultimate x64
Back
Top