Cleaning up old drivers

Quatrix

Banned
Local time
9:50 AM
Messages
20
I recently upgraded my motherboard and CPU and attached my existing hard drive. Windows 7 detected all of the new hardware and is running beautifully, but I just want to clean up remnants of old drivers for peace of mind. I already enabled Device Manager to show hidden devices and deleted the unused ones. The boot log, however, still shows a handful of unloaded drivers. I listed a few below. The NVIDIA GeForce GTX 275, for example, is no longer present. It doesn't appear in Device Manager, so where else might it be referenced?

Did not load driver @battery.inf,%*compbatt.devicedesc%;Microsoft Composite Battery
Did not load driver @battery.inf,%hid_device_battery.devicedesc%;HID UPS Battery
Did not load driver @cpu.inf,%intelppm.devicedesc%;Intel Processor
Did not load driver @hal.inf,%acpi_amd64.devicedesc%;ACPI x64-based PC
Did not load driver @oem1.inf,%xfi.devicedesc%;Creative X-Fi Audio Processor (WDM)
Did not load driver @oem46.inf,%nvidia_dev.05e6.01%;NVIDIA GeForce GTX 275
 

My Computer

OS
Windows 7 Professional x64
Personally, when I switch motherboards, I do a clean install.
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Acer M5641
OS
Windows 7 Home Premium 64bit
CPU
Q6600
Motherboard
Nvidia MCP73PV
Memory
4GB.
Graphics Card(s)
Sapphire Vapor-X 5750
Sound Card
XFI Extreem music
Monitor(s) Displays
Acer X223W
Screen Resolution
1680x1050
Hard Drives
WD10 02FAEX
WD64 00AAKS
PSU
stock 450w
Case
acer
Cooling
stock
Keyboard
Microsoft Digital Media Pro.
Mouse
Logitech MX620
Internet Speed
49.51Mbs down 4.98Mbs up 17.6ms ping
Antivirus
MSE
Browser
Waterfox
Other Info
Shaw Cable
Netgear R6200
No offense, but experience tells me otherwise. The only "clean" install I've done in the last 15 years was XP -> 7 and only because an in-place upgrade wasn't supported. I've swapped the core hardware four times in Windows 95, 98 SE, XP, and 7 without a major hitch, and everything still runs great. Windows is designed to handle hardware changes like this. That's why it boots right up (okay, sometimes requires switching disk controller to standard drivers first), detects the new hardware, deactivates the old drivers, and continues on its way. I keep things pretty clean (e.g. remove unnecessary startup items) anyway.
 

My Computer

OS
Windows 7 Professional x64
I was mistaken anyway. I was looking at old entries in the boot log. Actually these are the only drivers not loaded:

Did not load driver \SystemRoot\SysWow64\drivers\dsload.sys
Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
Did not load driver \SystemRoot\System32\drivers\vga.sys
Did not load driver \SystemRoot\system32\DRIVERS\serial.sys
 

My Computer

OS
Windows 7 Professional x64
If there is no reason to worry about doing a clean install on hardware swaps, then why be concerned with cleaning up old drivers?

You can not be sure that you got every bit of old drivers entries removed completely as to not be of concern at some point.

Space is not really that big an issue any longer.

It is always advised, that in the long run, it is better to clean install when swapping Motherboard and CPU due to different chipsets etc.

If/when in the future one does have an issue, no one, I do not care who they are or where they come from or what their background is, can guarantee that driver conflicts would absolutely not be the cause.

The only things not of real concern ,swaps of the following , RAM, HDD, Optical Drives, Sound Cards (usually, but not always) and Video Cards (usually, but not always), other misc devices.
 

My Computer

Computer Manufacturer/Model Number
Self Built
OS
Win 7 Ultimate 32bit
CPU
C2D E6600 2.4Ghz
Motherboard
Intel D965WH
Memory
4G Kingston KHX5400D2
Graphics Card(s)
EVGA GTX 570 HD SC (012-P3-1573-KR)
Sound Card
On-Board
Monitor(s) Displays
Samsung 226BW
Screen Resolution
1680 x 1050
Hard Drives
2 x 250 Seagate Barracuda
2 x 500 Seagate Barracuda (Raid1)
PSU
Corsair TX750W
Case
In-Win C589
Cooling
Stock Intel Cooling
Why be concerned with cleaning up old drivers? I don't know, OCD? Perfectionism? I'm no more worried about it than about getting a haircut.

Advised by whom? I've heard from computer "experts" who said they do complete reformats and reinstalls every 2 or 3 months for no good reason. There are hundreds of web pages documenting the in-place upgrade process without installing from scratch.

The chipset has little to do with anything. Windows detects the new chipset and stops using the old drivers just like other hardware. Even if old driver files are lying around, there's no conflict or other harm if they're disabled.

Four times I've successfully changed core hardware without wasting time reinstalling operating systems and software. How many times have you tried it?

Finally, back to the boot log, it turned out that there were only a few "did not load" entries, and they were all present before the upgrade. Everything is clean.
 

My Computer

OS
Windows 7 Professional x64
Right,, but because it has worked for you without issue, it will always do so. Sorry to burst your bubble.
But, ....... It is not always that smooth.

I stand by my posts. It is recommended to do a full reinstall when,....,,....,,...
 

My Computer

Computer Manufacturer/Model Number
Self Built
OS
Win 7 Ultimate 32bit
CPU
C2D E6600 2.4Ghz
Motherboard
Intel D965WH
Memory
4G Kingston KHX5400D2
Graphics Card(s)
EVGA GTX 570 HD SC (012-P3-1573-KR)
Sound Card
On-Board
Monitor(s) Displays
Samsung 226BW
Screen Resolution
1680 x 1050
Hard Drives
2 x 250 Seagate Barracuda
2 x 500 Seagate Barracuda (Raid1)
PSU
Corsair TX750W
Case
In-Win C589
Cooling
Stock Intel Cooling
Back
Top