Solved Combining 2 RAM models ?

[VXER]

Hey
This is what i have Kingston HyperX Beast 8 GB Kit (2x4 GB) 2400MHz DDR3 PC3-19200 Non-ECC CL11 DIMM XMP Desktop Memory KHX24C11T3K2/8X at Amazon.com exactly that model,i need to upgrade my ram but the problem is i cant find any near my location,so what im wondering can i use a different type to add with these Hyper X model ? if i can,can you please list me what can i use to upgrade my ram along with the existing type that i have,also can i just add a single 4 or 8 gb ?

 

[Sub Styler]

You can use mixed RAM. It would be best to to use matching but you will not be garunteed they will run quad channel unless they came in a matched kit. All the ram will run on the lowest bus speed and highest latency of the combined modules. Try to buy RAM with the same timings as your current RAM. If your BIOS allows it, set Dual channel not Quad channel.

To know which ram to use, check the QVL (qualified vendor list) for your motherboad.

http://www.asus.com/uk/Motherboards/Z97AUSB_31/HelpDesk_QVL/

When installing the RAM put matching modules into matching colour slots.

Run memtest86+ for a few passes to make sure there are no issues, if so take the ram back and exchange for another try.

 

[AddRAM]

Why can`t you find another set in your area, just google it and a dealer should come up.

You need a country flag down below your name, so we can help you out

 

[VXER]

I found the same model but with the different part number,will that be a problem ?

Amazon.com: Kingston Technology HyperX Beast 8GB Kit 2400MHz DDR3 Non-ECC CL11 DIMM XMP Desktop Memory HX324C11T3K2/8: Computers & Accessories

 

[AddRAM]

No. Looks fine.

 

[VXER]

This guy says

they might be the same speed but they have different latency values


HyperX HX324C11T3K2/8

XMP TIMING PARAMETERS
• JEDEC: DDR3-1600 CL11-11-11 @1.5V
• XMP Profile #1: DDR3-2400 CL11-13-14 @1.65V
• XMP Profile #2: DDR3-2133 CL11-13-13 @1.6V


HyperX KHX24C11T3K2/8X

XMP TIMING PARAMETERS
• JEDEC: DDR3-1333 CL9-9-9 @1.5V
• XMP Profile #1: D3-2400 CL11-13-13 @1.65V
• XMP Profile #2: D3-2133 CL11-12-11 @1.6V

It can cause for the memory to run at lower speed Like 1333, or the system to be unstable, or in worst case for the system not to boot at all.

True ?

 

[AddRAM]

I would really try to get a set with the same numbers.

Why do you think you need to upgrade what you have ?

8 GB of 2400 MHz is fine

SD Cards, SSDs, Memory Modules and USB Flash Drives - Kingston

 

[VXER]

That's the problem,can't find the same part.
Want headroom,like maybe ill need it for mods,a mod for Watch dogs needs 16 gigs and so on,also i've noticed when gaming the RAM usage always tops 6-7Gb,guess it has something to do with the 970 VRAM thing,so yeah

How can i know for sure if i will have or not have any problems with this ? let's say i got it,will i be able to adjust the XMP timings for both to run at the same ?

 

[AddRAM]

The 2nd set you picked out looks fine.

I wouldn`t compare the XMP timings.

Compare the normal timings the ram run at.

Can you install CPU-Z and post a shot like this, showing the same tab please

I would like to see the actual numbers of the ram you have installed now.

 

[Dude]

I would really try to get a set with the same numbers.

Why do you think you need to upgrade what you have ?

8 GB of 2400 MHz is fine

SD Cards, SSDs, Memory Modules and USB Flash Drives - Kingston

What with your name how can you say that?

That's the problem,can't find the same part.
Want headroom,like maybe ill need it for mods,a mod for Watch dogs needs 16 gigs and so on,also i've noticed when gaming the RAM usage always tops 6-7Gb,guess it has something to do with the 970 VRAM thing,so yeah

How can i know for sure if i will have or not have any problems with this ? let's say i got it,will i be able to adjust the XMP timings for both to run at the same ?

Yes, you can change the timings in your BIOS VXER

 

[VXER]

Here it is,it's 1199Mhz ? i have the BIOS set on XMP profile at 2400Mhz,whats wrong here ?

 

[AddRAM]

Imagine that, me saying Don`t AddRAM

I think the set you picked out will be fine, go for it

 

[VXER]

Yes, you can change the timings in your BIOS VXER

That's a relief,so by that you say i wont run into any problems using these 2 parts ?

Imagine that, me saying Don`t AddRAM

I think the set you picked out will be fine, go for it

Will do,thanks for the help mate

 

[Dude]

Imagine that, me saying Don`t AddRAM

I think the set you picked out will be fine, go for it

Yeah, couldn't resist I think the new ram will work. He could manually set the ram timings in his BIOS and match them perfectly. Perfect matched sticks are preferable though, just my 2c and opinion

VXER, review your mb manual for bios settings. You can set them yourself

 

[VXER]

VXER, review your mb manual for bios settings. You can set them yourself

Yup,ill try but most likely end up doing a thread here
Thanks for the help.

 

[AddRAM]

You really shouldn`t have to change anything, both ram sets are CL11, but when you get the new set look at the CL numbers, they should be written right on the white label on the ram.

Did you order them yet ?

Hurry up

I may sell my 32 GB of Corsair to get these.

G.SKILL Trident X Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2400 (PC3 19200) Desktop Memory Model F3-2400C10Q-16GTX - Newegg.com

 

[Dude]

I agree Brian, he should be good. That new ram you linked looks real good

 

[AddRAM]

Its either that or sell my new blue sticks for a new set of black or red.

CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ16GX3M2A1600C10 - Newegg.com

CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ16GX3M2A1600C10R - Newegg.com

I already have 2 black, so 2 red would look sweet

 

[Dude]

Well the Jedi master aka essenbe has said, red is faster

 

[AddRAM]