Solved Computer has been freezing today and now I got a BSOD

[Pamal91]

My computer has decided to start freezing and spitting errors at me today...while trying to figure out what is going on, and restarting multiple times due to the computer freezing, I got the wonderful BSOD. Dumps are attached.

 

[Golden]

*** WARNING: Unable to verify timestamp for SYMEFA64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff88008eaeecb, fffff8800ed7f408, fffff8800ed7ec60}

Probably caused by : [COLOR="Red"][B]SYMEFA64.SYS[/B][/COLOR] ( SYMEFA64+29ecb )

Followup: MachineOwner
---------

Uninstall Symantec/Norton. Install MSE. Monitor for further BSOD and advise.

 

[Pamal91]

Never fully installed Norton, got a BSOD in the middle of installation. Just got another BSOD while running a full MSE scan.

 

[Golden]

Well parts of Norton are embedded in your system, as evidenced by the .dmp files.

Try using RevoUninstaller to remove any remnants.

 

[Pamal91]

Ok, I'm pretty sure all traces of Norton are now gone...left a full MSE scan running over night and woke up to see that I got another BSOD. New .zip is attached. :/

 

[Golden]

Event[86821]:
  Log Name: System
  Source: Service Control Manager
  Date: 2015-02-07T10:51:29.510
  Event ID: 7000
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Pamaldeep-PC
  Description: 
The[B][COLOR="Red"] BCM42RLY[/COLOR][/B] service failed to start due to the following error: 
The system cannot find the file specified.

Your eventlog is riddled with the above errors. BCM42RLY is a Broadcom adapter driver. I recommend uninstalling, then reinstalling it.

 

[Pamal91]

I decided to look into how to read minidump files and saw a lot of the BSOD were caused by my memory. So I ran MemTest86 and saw that one of my ram sticks was the problem. I took that out and now my computer is running fine. I also fixed the Broadcom error btw. Thanks for your help.