Connected to wireless but can't access the internet

[chev65]

I did this with commands and no changes.
I tried after using this commands, to do what you said with those IP-s, same happens, seem like IP/Subnet mask isn't correct or something, prob what you said, he changed configuration to the router.
Guys, thanks for attempting, I guess there are no any other chances left to try something more.
Best regards!

Starting up in safe mode with Networking would be the next option to try. This is because your ipconfig shows you are online but you can't seem to get anywhere so something may be blocking the connection. Which A/V software are you running?

You might also want to disable the Microsoft Virtual WiFi miniport adaptor in Device Manager as it sometimes causes connection problems.

You can usually determine if an installed program or A/V software is blocking the connection by starting up in safe mode with Networking.

http://www.sevenforums.com/tutorials/69585-safe-mode.html

 

[Slartybart]

Ok kute - good luck.

I'm sure that you and your friend can work through the configurations. Your machine is probably configured ok since you said that you can connect in other places - only your friend's router causes you difficulties.

Chev65 has the lead on this, I'm out of ideas.

One last thing - you might want to change your wireless configuration back to
Obtain IP address automatically, if you haven't done that already

-Bill
.