constant BSOD

[Jonathan_King]

Wish your friend a quick recovery from us. Good luck with the RAM change!

 

[dcrewchief]

If you have more than memory card installed try removing one and see if fixes problem. its quick easy way to troubleshoot.

 

[kaos2011]

Ok new ram come and put this in pc . Still gt bsod... also the pc locks up with the 2 new ram in slots 1 n 2 and so dies the original ram tht was nt changed .. seems the 4 ram I hve locks up even with one stck in ... any ideas

Sorry for long delay

 

[Jonathan_King]

Could we get info on this?

PSU - brand/wattage
motherboard - model
RAM - model

 

[kaos2011]

Psu is 400w
Motherboard is asus m4a88t-m /usb3
Ram are all 2gb sticks
2 are g series ram 2x2gb ddr3 1333mhz .( 7-7-7-20)
2 are unbranded... these were changed same as above
Also remember it crashed with one stick in and 2 sticks from the same pack
CPU is a huge thing quad core. Nt sure of makecsince I cnt get on my pc much . Using my phone to use forums

 

[kaos2011]

I think the brand is Atx or Cic or something .. sorry lol

 

[Jonathan_King]

Try removing the video card for now; take it out of your machine and use the onboard graphics instead. This will help reduce power usage. When done, take out all RAM sticks except for one of the new ones. With just that one stick installed, run Memtest86 for 7 passes or until it errors (whichever comes first). If you get no errors after 7 passes, move that stick to the next motherboard slot over, and repeat the process until that stick has been tested in all slots.

Repeat with the other stick of new RAM as well.

 

[kaos2011]

Wat test number is best ?

 

[Dave76]

If you got a lot of errors, on any test, just run the normal Memtest86+, if you get any errors you can stop the test.
Let us know the results.


D/L CPUZ and post a snip of the CPU, Mainboard, Memory, and SPD tabs.

For posting the information , enter 'Snipping tool' in the Start button > Search box, hit enter. Select the area you want to post and save to a convenient place.
How to Post a Screenshot in Seven Forums

The CPUZ tabs will tell you the details about your RAM, you need to check if it is compatible with your system and the timings and settings are correct.

Go to your BIOS and tell us what the CPU, RAM and the CPU integrated memory controller voltages are.

 

[kaos2011]

Ok doing.this now . I'm in slot 3 so far no errors . Slot 1 and 2 went fine with no errors but when I have had one ram stick in the first slot before I had the blue screen n lock ups. It's about 3 hours for 7 passes so will post again when I done the last slot and the other bits of info u want

 

[Dave76]

Thanks for the update.

Let us know how the testing goes.

 

[kaos2011]

Ok 7 passes in each slot with dame new.ram and no errors..just getting the cpuz program snippets u want. Won't be too long

 

[kaos2011]

here are all the screen shots for CPUZ,
hope this helps lol