tubatime1010
New member
- Local time
- 10:08 AM
- Messages
- 2
I'm attempting to install windows to a 40GB SSD and I continuously receive the error 0x80070570. My first thought when I got the error was that it could have been an issue with the file itself. So I redownloaded it and still got the same error and from there I've tried nearly everything listed in other threads relating to this issue. Here's a synopsis of everything I've done thus far.
Start:
Removed old hardware, replaced with new mobo, cpu and gfx card
Downloaded Windows 7 Home Premium from microsoftstore.com
Using the Microsoft supplied tool I created a bootable USB flash drive with the ISO
Powered the new hardware on for the first time resulting in a clean boot with zero errors
Booted to Win7 install, ended up with Error 0x80070570
Redownloaded the ISO, Remounted it on the flash drive
Attempted install, still errored
Repeatedly attempted the install sometimes resulting in a freeze of the installer but usually the same error message
Tried installing on my other SSD
Cleaned and reseated RAM and Slots
Did a secure wipe of both SSDs and retried install on both
Attempted install with the ISO burned on a DVD using low speed...same error
Tried reburning multiple times with the same error each time
Ran 5 passes of memtest on both ram sticks in all possible configurations. 0 errors
After all of these steps I still cannot complete an installation. The install errors out at different points of the "expanding" step each time.
Finally in a spate of desperation I tried using the same media (2 DVD attempts, 1 USB, and then just the ISO directly downloaded from microsoft to the system) to install windows via Parallels on my Macbook Pro...It still errored! Does this mean that the file on Microsoft's site is corrupt...? What on earth should I do at this point?
Start:
Removed old hardware, replaced with new mobo, cpu and gfx card
Downloaded Windows 7 Home Premium from microsoftstore.com
Using the Microsoft supplied tool I created a bootable USB flash drive with the ISO
Powered the new hardware on for the first time resulting in a clean boot with zero errors
Booted to Win7 install, ended up with Error 0x80070570
Redownloaded the ISO, Remounted it on the flash drive
Attempted install, still errored
Repeatedly attempted the install sometimes resulting in a freeze of the installer but usually the same error message
Tried installing on my other SSD
Cleaned and reseated RAM and Slots
Did a secure wipe of both SSDs and retried install on both
Attempted install with the ISO burned on a DVD using low speed...same error
Tried reburning multiple times with the same error each time
Ran 5 passes of memtest on both ram sticks in all possible configurations. 0 errors
After all of these steps I still cannot complete an installation. The install errors out at different points of the "expanding" step each time.
Finally in a spate of desperation I tried using the same media (2 DVD attempts, 1 USB, and then just the ISO directly downloaded from microsoft to the system) to install windows via Parallels on my Macbook Pro...It still errored! Does this mean that the file on Microsoft's site is corrupt...? What on earth should I do at this point?
My Computer
- OS
- Windows 7 Ultimate x64
- CPU
- Intel Core i7 3770k
- Motherboard
- Asus P8 Z77-VLK
- Memory
- 16GB Corsair Vengeance DDR3-1600
- Graphics Card(s)
- EVGA GeForce GTX 660 Ti
- Sound Card
- Onboard (Unused), USB Inline (Razer Megalodon)
- Monitor(s) Displays
- 2x Asus ML249
- Screen Resolution
- 2x 1920x1080
- Hard Drives
- 1 120GB Corsair SSD
1 2TB Hitachi HDD
- PSU
- Corsair AX850
- Case
- NZXT Phantom White
- Cooling
- Zalman CNPS9900MAX-B
- Keyboard
- Corsair Vengeance K60
- Mouse
- Corsair Vengeance M60
- Internet Speed
- D: 50Mbps U: 4Mbps