- Local time
- 7:34 PM
- Messages
- 637
just wanted a little verification on cut out temps as well as comparing to my previous chip.
my current processor is AMD Athlon II X2 250 3Ghz chip and l wondered where the points l should start to worry bout temp were. generally l am around 27C which is pretty good however as the weather warms lm sure this will change.. so curiously l would like to know when l should start to get before l start worrying about heat as lve noticed that some say around 60C where as the old socket a's lve seen were around 80C.
what l am saying is what is the temp l should start worrying at.. would 50/55C be when l should contemplate hanging heat compound to something other than the pre-applied pad l had with my heatsink? and l am curious as to what my CPUs damage temp is as l didnt see it noted on my package and a general range that would be considered quite reasonable temps to be within, l did ask support as l purchased everything recently but they only seem to be interested in offering advice for products that l intend to purchase.
my current processor is AMD Athlon II X2 250 3Ghz chip and l wondered where the points l should start to worry bout temp were. generally l am around 27C which is pretty good however as the weather warms lm sure this will change.. so curiously l would like to know when l should start to get before l start worrying about heat as lve noticed that some say around 60C where as the old socket a's lve seen were around 80C.
what l am saying is what is the temp l should start worrying at.. would 50/55C be when l should contemplate hanging heat compound to something other than the pre-applied pad l had with my heatsink? and l am curious as to what my CPUs damage temp is as l didnt see it noted on my package and a general range that would be considered quite reasonable temps to be within, l did ask support as l purchased everything recently but they only seem to be interested in offering advice for products that l intend to purchase.
My Computer
- Computer type
- PC/Desktop
- Computer Manufacturer/Model Number
- Custom build
- OS
- Windows 7 Professional (64bit)
- CPU
- Intel i5 4440 3.10ghz
- Motherboard
- Gigabyte GA-H97M-D3H
- Memory
- Corsair 32GB (4x8GB) DDR3 1600MHz Vengeance Memory Kit 1.5V
- Graphics Card(s)
- Intel Graphics 4600 (on board)
- Sound Card
- External Creative Soundblaster
- Monitor(s) Displays
- 32" TV
- Screen Resolution
- 1360*768
- Hard Drives
- Kingston SSDNow UV400 240GB 2.5inch SATAIII SSD
1 1TB WD WD10EADS
3 1TB WD WD10EZEX
- PSU
- Coolermaster GM-Series 550W Semi Modular
- Case
- Aerocool X-Predator X1 Devil Red
- Cooling
- 5x 120mil (Arctic F12)
- Keyboard
- Microsoft Curve 2000 v1
- Mouse
- Trust MaxTrack Mini Mouse - 6 button(s) - wired - USB
- Internet Speed
- 34Meg
- Antivirus
- Bitdefender 2017
- Browser
- Firefox