Device Calibration issues

[Sledge1964]

Hi - having a wee issue with the calibration of my steering wheel and xbox 360 controller.
When I first got them, I had screens that showed an image of the device, that allowed for configuration and calibration like the following pics:
technology_044a_005_zpsae9ef9e5.jpg Photo by Sledge1964 | Photobucket

Screenshot_7_zpsd3f77802.jpg Photo by Sledge1964 | Photobucket

Today I needed to calibrate the xbox controller because it was beginning to drift, and low and behold - all my calibration screens look the same now:
Screenshot_4_zpse78d6fda.jpg Photo by Sledge1964 | Photobucket
Screenshot_5_zps83c3edb8.jpg Photo by Sledge1964 | Photobucket

You'll notice for the xbox calibration theres only one field for a joystick - not two , and no dpad either...
The steering wheel calibration had pedals and gears as well...

I had a look under device manager and this is what it looks like now:

Screenshot_6_zps56a9175b.jpg Photo by Sledge1964 | Photobucket

I'm pretty sure there should be an entry for the xbox there -but I see none - it's somehow generalised everything I have.

Anyone have any ideas how I can get the old config screens back?
I've tried de-installing, reinstalling - software as well as entries in the device manager.
I'm stumped and I can't seem to find any info on the net - or maybe I'm using the wrong key-words.

Look forward to hearing from you
Thanks in advance

Cheers
Sledge

 

[Sledge1964]

No ideas anyone?

 

[stormy13]

Looks like you need to re-install this,

https://code.google.com/p/x360ce/wiki/Whatisx360ceandhowuseIt

 

[Sledge1964]

Thanks for the reply Stormy - tried that - doesn't seem to have changed owt