Solved Does anyone think these temps are off?

[Solarstarshines]

Hi all i am posting a new OC with a new cpu i currently installed a 965 BE oc'ed to 4.1 ghz are these temps correct because cpuz can't detect them this also happened with my previous cpu 2.8 925 deneb but temps were really low with that one too round 16 to 14 c

I also have a hyper 101 heatsink dual fan push/pull
i also used artic silver formula 5 the OC seems to be stable but i might push it back after i run some test anyway it seems to oc better then my previous 2.8 925 deneb so if anyone has some thoughts please share


also failed to mentioned i installed a new psu 700 watt cooler master extreme

 

[thefabe]

If they are right I'd say sweet. Have you tried maybe another program like core temp? Download Core Temp
Fabe

 

[Solarstarshines]

actually core temp is one of them already on the post cpuz cpu hw monitor core temp and my hw monitor from the Mobo

also do you have the 10.12 hotfix or anyone for that matter I know you are a Nvidia guy Fabe

also my temps dropped when i installed 10.12 look at the gpu pic from before look how much the temps drop

 

[thefabe]

Well that's it I'm offically blind. Sorry about that. Well if that's core temp it's not reading right it should show all 4 cores and I don't see any temps for them like on mine. Would you mind snipping it. Would make it easier to read. Thanks. Fabe

 

[Solarstarshines]

lol don't beat yourself up yet hahaha just a small oversight but it seems to be doing the job so far i was actually going for the 970 BE but i mean 100mhz really ? no point in that and this was 40 dollars cheaper

 

[thefabe]

lol don't beat yourself up yet hahaha just a small oversight but it seems to be doing the job so far i was actually going for the 970 BE but i mean 100mhz really ? no point in that and this was 40 dollars cheaper

Well Okydoky then you had me finding my magnifying glass and cleaning it. Wouldn't be so bad if i wasn't blind in one eye and couldn't see out of the other.
Fabe

 

[whs]

You must live in the arctic or your hyper 101 does a terrific job. In my house, the room temps are higher.

 

[Solarstarshines]

here ya go same thing no temps

 

[Solarstarshines]

well it is almost like artic here i live by the beach and my room is on the bottom floor of a hill and my room is pretty huge and with a double glass door so yes very cold

 

[stormy13]

You have the latest bios installed on the motherboard? If so have a good look through the "T-Series" menu for anything to do with ACC (automatic clock control),

SB750 and Advanced Clock Calibration unlocks higher Phenom frequencies - www.nordichardware.com

which is supported on all 785G/710 based motherboards as long as the option is present, and from looking at the bios update page for your board Biostar added it in the 88GCO517 bios,

BIOSTAR :: TA785GE 128M :: BIOS

When used to successfully unlock cores on x2 and x3 CPU's it "breaks" the core temperature readings and they all read 0° just like yours is. If you find it and it is enabled, set it to disabled and you should get the core temps back.