- Local time
- 9:47 AM
- Messages
- 679
Hello forum,
I am planning to switch out my motherboard for a different chipset (85X to 990FX) and would like to perform the change by using sysprep. However It was brought to my attention that while sysprep does install default drivers upon system restart, it does not remove the drivers previously installed with the old motherboard and it may cause conflicts once the new motherboard is installed.
Since I cannot lose my present system configuration or afford a clean install right now due time limitation, I need to find a way to avoid as many problems with sysprep.
So I come to the question, is there a way to remove all drivers before performing sysprep?
Have any of you done a similar motherboard swap, IE changing chipsets?
Thank you.
I am planning to switch out my motherboard for a different chipset (85X to 990FX) and would like to perform the change by using sysprep. However It was brought to my attention that while sysprep does install default drivers upon system restart, it does not remove the drivers previously installed with the old motherboard and it may cause conflicts once the new motherboard is installed.
Since I cannot lose my present system configuration or afford a clean install right now due time limitation, I need to find a way to avoid as many problems with sysprep.
So I come to the question, is there a way to remove all drivers before performing sysprep?
Have any of you done a similar motherboard swap, IE changing chipsets?
Thank you.
My Computer
At a glance
Windows 7 professional X64AMD A10-5800K OC@ 4.4Ghz.8GB Kingston HyperX Blu 1333mhzXFX HD7870 2GB Core Edition
- Computer type
- PC/Desktop
- OS
- Windows 7 professional X64
- CPU
- AMD A10-5800K OC@ 4.4Ghz.
- Motherboard
- Gigabyte F2A85X-UP4
- Memory
- 8GB Kingston HyperX Blu 1333mhz
- Graphics Card(s)
- XFX HD7870 2GB Core Edition
- Monitor(s) Displays
- Acer AL2216W
- Screen Resolution
- 1680x1050
- Hard Drives
- Seagate Barracuda 500gb 7200rpm
Seagate Barracuda 1.5TB 7200rpm
- PSU
- Cooler Master Silent Pro M 850W
- Case
- Thermaltake Commander MS-I
- Cooling
- Cooler Master N520
- Mouse
- Logitech M504
- Internet Speed
- 10Mbps