Eject button fix, please help.

DMGrier

New member
Member
Local time
11:34 PM
Messages
35
So I have a Dell studio, I use to run Ubuntu 10.04 on there and I re-installed Windows 7 on there. The problem is my disc drive has a button on the key board to eject the disc cause my I don't have the disc tray I have the slot on the side where you just slide the disc in, since I have re installed Windows 7 it has not worked so I was hoping someone could tell me how to set the button up to where it is the eject button. I know I can right click on the disc in computer and click on eject but if possible I would like by eject button to work properly. Thanks for any help.
 

My Computer

Computer Manufacturer/Model Number
Sony Vaio
OS
Windows 7
CPU
Intel core i3 2.5 Ghz
Memory
4 GB DDR3
Graphics Card(s)
Intel HD 300
Screen Resolution
1366×768 pixels
Hard Drives
500 GB 5400 rpm
Internet Speed
Wi-Fi 802.11 a/b/g/n
You'll most likely need to download the drivers for that functionality (.

Go here and put in your model number to find the drivers available:

Dell - Drivers and Downloads

First, make sure you have the chipset drivers installed, then install the Quickset Application (this is under the Application tab). This application is unfortunately needed for those touch-sensitive buttons.
 

My Computer

OS
XP / Win7 x64 Pro
CPU
Intel Quad-Core Q9450 @ 3.2GHz
Motherboard
Asus P5-E
Memory
2x2GB GSkill DDR2
Graphics Card(s)
NVIDIA GeForce 8600 GTS (EVGA)
Monitor(s) Displays
Dell 2408WFP
Screen Resolution
1920x1200
Back
Top