Error 800B0100 on KB2882822 & KB2859537

[yellowragz]

I have windows 7 sp1 32 bit, and when tried to install KB2882822 & KB2859537 through windows update then it ends with error code 800B0100, i have tried to download the standlone installer but the update still not installed, and also already run sfc scan and found no error, any help would be appreciated

Sorry for my bad english, i'm indonesian

 

[NoelDP]

Sorry about the delay - I've been a little busy!
This looks fairly simple - here's the relevant errors from the CheckSUR report...

Unavailable repair files:
 servicing\packages\Package_2_for_KB2882822~31bf3856ad364e35~x86~~6.1.1.2.mum
 servicing\packages\Package_2_for_KB2882822~31bf3856ad364e35~x86~~6.1.1.2.mum
 servicing\packages\Package_for_KB2882822_SP1~31bf3856ad364e35~x86~~6.1.1.2.mum
 servicing\packages\Package_for_KB2882822_SP1~31bf3856ad364e35~x86~~6.1.1.2.mum
 servicing\packages\Package_for_KB2882822~31bf3856ad364e35~x86~~6.1.1.2.mum
 servicing\packages\Package_for_KB2882822~31bf3856ad364e35~x86~~6.1.1.2.mum
 servicing\packages\Package_2_for_KB2882822~31bf3856ad364e35~x86~~6.1.1.2.cat
 servicing\packages\Package_2_for_KB2882822~31bf3856ad364e35~x86~~6.1.1.2.cat
 servicing\packages\Package_for_KB2882822_SP1~31bf3856ad364e35~x86~~6.1.1.2.cat
 servicing\packages\Package_for_KB2882822_SP1~31bf3856ad364e35~x86~~6.1.1.2.cat
 servicing\packages\Package_for_KB2882822~31bf3856ad364e35~x86~~6.1.1.2.cat
 servicing\packages\Package_for_KB2882822~31bf3856ad364e35~x86~~6.1.1.2.cat

I'll post a fix for them soon.

 

[NoelDP]

I've uploaded a file - yrzaa.zip - to my SkyDrive at Noel's SkyDrive
Please download and save it.
Right-click on the downloaded file, and select Extract all…
Extract to the default location - which will create a new folder yrzaa in the same place.
Open this folder - there should be one folder inside it (Packages)

Copy the content of the Packages folder to the folder
C:\Windows\Temp\CheckSur\Servicing\Packages

Now run the CheckSUR tool again (it may take a while)

Post the new CheckSUR.log file, and the CheckSUR.persist.log file.

 

[yellowragz]

Thanks for Your response NoelDP sorry for late post, here is the CheckSUR, btw no folder Servicing in windows/temp, so I make folder name Servicing and copy the the content with the folder named Packages from Your SkyDrive inside Servicing folder that I create..

 

[NoelDP]

Did you copy it to the correct folder?
There's no change in the report...

You must make sure that the full path is correct...
C:\Windows\Temp\CheckSur\Servicing\Packages\......

 

[yellowragz]

Yup, just a folder name v1 in C:\Windows\Temp\CheckSur

 

[NoelDP]

It's my fault - I sent you the x64 versions rather than the x86 versions...
back in a minute or three

 

[NoelDP]

I've uploaded a file - yrzab.zip - to my SkyDrive at Noel's SkyDrive
Please download and save it.
Right-click on the downloaded file, and select Extract all…
Extract to the default location - which will create a new folder yrzab in the same place.
Open this folder - there should be one folder inside it (Packages)

Copy the content of the Packages folder to the folder
C:\Windows\Temp\CheckSur\Servicing\Packages

Now run the CheckSUR tool again (it may take a while)

Post the new CheckSUR.log file, and the CheckSUR.persist.log file.

(with luck I have the right files this time!)

 

[yellowragz]

Thanks for Your response NoelDP, hahahaha.. it's okay no problem Here is the file

 

[NoelDP]

Phew! - got it right that time!

Summary:
Seconds executed: 506
 Found 3 errors
 Fixed 3 errors
  CBS MUM Corrupt Total count: 3
  Fixed: CBS MUM Corrupt.  Total count: 3
  Fixed: CBS Paired File.  Total count: 3

Please now run a new SFC /SCANNOW and post the new CBS.log - if it says' no integrity violations' then test Windows Update by doing a manual check for updates, and then attempting to install the oldest available update.

 

[yellowragz]

Umm, before this I already run SFC /SCANNOW and found no error (I mean "no integrity violations"), what you mean about manual check update ? download the installer and install it not from windows update but from standalone installer from microsoft website ? if yes then I already do that and it says update were not installed

 

[NoelDP]

No - I mean got to Windows Updates, and select the 'Check for Updates' in the left column.

 

[yellowragz]

Thanks for Your response NoelDP, sorry for late post , after I check for updates through windows update only found KB2882822, the KB2859537 was successully installed on windows update history, and after update it, it says not needed update.. then i check for updates again, the KB2882822 still found on windows update, then when i update it again then comes error 8024200D

 

[NoelDP]

That's OK - KB2882822 should install properly if you do it using the download from here....
Download Update for Windows 7 (KB2882822) from Official Microsoft Download Centre

 

[yellowragz]

OK, now my problems was fixed.. thank you very much NoelDP

 

[NoelDP]

Great!

Good luck.