I just bought an Thermaltake BlacX USB and Esata Docking Station. I am connected trough esata but
the problem is that the drive is not detected when I power up the BlacX BEFORE turning on the computer or do a restart.
When I power up the BlacX AFTER booting I have to go to Device manager and click "Scan for Hardware changes" so it will be detected.
I already downloaded and installed the drivers from thermaltake site created to correct this problem.
I tried chooing AHCI in Esata mode but nothing...
I wonder what is going on,
thanks a lot
any help is appreciated
EDIT: my motherboard is a XFX nforce 750i SLI...
the problem is that the drive is not detected when I power up the BlacX BEFORE turning on the computer or do a restart.
When I power up the BlacX AFTER booting I have to go to Device manager and click "Scan for Hardware changes" so it will be detected.
I already downloaded and installed the drivers from thermaltake site created to correct this problem.
I tried chooing AHCI in Esata mode but nothing...
I wonder what is going on,
thanks a lot
any help is appreciated
EDIT: my motherboard is a XFX nforce 750i SLI...
My Computer
At a glance
Windows 7 x64bit Home PremiumIntel Core i5-2500K Quad-Core Processor 3.3 G...8GB G.Skill DDR3 PC3-12800 1600MHz - F3-12800...Sandy Bridge
- Computer type
- PC/Desktop
- Computer Manufacturer/Model Number
- Custom Build
- OS
- Windows 7 x64bit Home Premium
- CPU
- Intel Core i5-2500K Quad-Core Processor 3.3 GHz 6 MB Cache
- Motherboard
- Intel Desktop Board Media Series LGA 1155 DDR 1333 Micro-ATX
- Memory
- 8GB G.Skill DDR3 PC3-12800 1600MHz - F3-12800CL9D-8GBRL
- Graphics Card(s)
- Sandy Bridge
- Sound Card
- M-Audio Fast Track PRO - Avid digidesign 003 rack factory
- Monitor(s) Displays
- Acer X233H LCD monitor
- Screen Resolution
- 1920x1080
- Hard Drives
- OS Drive: Silicon Power 256GB SSD 3D NAND A55 SLC Cache Performance Boost SATA III
- PSU
- Cooler Master eXtreme Power Plus 500w Power Supply
- Other Info
- This Computer was built from scratch
