Event Viewer Help

[sgmdew]

Can someone please help me figure out the solution to this warning:

The description for Event ID 129 from source amd_sata cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
\Device\RaidPort0
the message resource is present but the message is not found in the string/message table

I get this quite often and is usually after my pc locks up for maybe 10/20 secs. The pc acts as if it cannot keep up with commands and I think this is the cause of the freeze. Some key stats are: MB=GA 990FXA; Vid=GTS 750; 16MB ram 1866; OS=7/64 Pro; and sata 230 hd with 1TB sata backup. I also have drivers installed for marvell raid but run no raid at this time.

I know warning are generally just that but most of them I get fixed or eliminated but this one I just can't get the bottom line on it and as usual MS takes you on a extended trip to tell you nothing. I really would love to get rid of this warning and any help is greatly appreciated.


PS; have run many virus checks so sure that is not the problem. Thanks

 

[sgmdew]

Really, nobody have an answer or suggestion.

 

[maxie]

Have you Read the Solution in the Link below ...


Event ID 129 â

 

[sgmdew]

Have you Read the Solution in the Link below ...


Event ID 129 â

So far the first suggestion I already had at off but will finish reading after trip to kids for xmas, thanks for the link; hopefully I can find source.

 

[maxie]

No problem ... Please keep us Posted with your progress ...

 

[sgmdew]

Made all the adjustments noted and most were already set but anyways haven't had this warning show up for last 3 days. Now I'm getting profile error and temp profile being made for last 2 days; always something. Thanks for the link.

 

[maxie]

Are you getting this error >>> The User Profile Service failed the logon. User profile cannot be loaded ? ...

 

[sgmdew]

Yea, think it happens when AV is running

 

[maxie]

See if the Link below Helps ...

http://www.sevenforums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

 

[sgmdew]

This is the one I got today for no reason:
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
And then this one:
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.

 

[sgmdew]

First problem showed back up today, error 129, raid crap. Maybe I should just get rid of the logs and then I won't be looking in them.

 

[maxie]

Some of the Logs are best ignored ...

 

[sgmdew]

You right, time to format, reload, thanks.

 

[maxie]

Are you having any more issues ? ... The reason i ask is cause it seems a bit trivial for a Clean Install ...

 

[sgmdew]

Sometimes my unit will freeze but nothing shows up for the cause except I think the hd is starting to fail; plus I have several new ssds I can load up now and just format this one for storage if it's still good. I need to test it, but rather have a good unit installed before I do. Maybe then all these warnings/errors will go away, thanks.

 

[maxie]

A new Drive should solve all your problems