Explorer.exe server execution failed

[roving]

Problem Solved

Many thanks to Gigaherz and Google as it found his following post on this forum for 9-17-09. I made the suggested change to the first location. My drive had somehow changed from "C" to "T", which is my thumb drive. The second change to the second location mentioned below wouldn't be accepted. After a restart all seems to be functioning normally, with Wind Exp and the shortcuts to Control Panel, Computer, etc fully functional. Thanks to each of that read my post and gave it your attention.

Hello people,

I just today had this same problem in my Windows 7 profile.
The solution is to go to regedit, and change 2 keys to point to valid places:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\Personal

and

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell  Folders\Personal

You can set back the defaults by looking at how the other entries in those keys look like.

I'm not enterely sure if the second one is necessary, but I changed both to point to valid places and it works now.

 

[CJoshDoll]

FYI reg fix worked for me. Similarly I had my "Documents" pointed to a USB drive that didnt mount as its normal letter today.

Had been in the process of changing my external drives (I use a lot of them) to use folder mount points in addition to letter, which really is the best solution for this problem long term. For example I am going to have

C:\.res\mounts\
C:\.res\mounts\drive1\
C:\.res\mounts\drive2\
C:\.res\mounts\drive3\
Etc

Then "Documents" and "Personal" wont be pointed to a letter, they will point to
C:\.res\mounts\drive1\

Thus even if the drive isnt plugged in, it will still find that directory, it will just be empty. As soon as the drive is plugged in, it wont matter what letter it gets, because it will also mount to
C:\.res\mounts\drive1\ everytime.

mountvol.exe and linkd.exe are your friends. While *nix still confuses me with /mnt/sda1/ and such, MS needs to get with the program of mounting to a universal resource location, in addition to drive letter. I have so many needs for portable use that if I could rely on a consistent mount point from computer to computer based on the drive ID or similar, live would be so much easier. Right now I have to build scripts that look for a volume label, store the drive letter as a variable, then do what I need to do with the variable. Its not consistent and doesnt always work. Being able to map physical drives similar to UNC paths is greatly needed - not just folder mounts, but a consistent way to access a drive based on its mount ID, serial, or something unique to the drive that any windows pc will recognize. Ive even seen instances of different machines giving different mount GUIDS to the same drive, which shouldnt happen.

 

[eoes5991]

The registry fix fixed my sis comp! Windows 7 Home Premium 32 bit Dell Inspiron.

Thanks!!

 

[TalTech]

Simply click start or the windows logo then right click on Documents then properties then click restore defaults. Hope it works.

 

[grayrid3r]

Thanks much TalTech solved my problem!

 

[jgarcia2193]

What do you do it none of the previous fixes does anything to help the situation?

 

[mr pc]

you get a mac :shock:

j/k

I have been having issues with explorer "winking" out on me - I have a ton of explorer files from making edits and what not. I do have the "restart explorer" option in my context menu which helps...

But I am curious as to why explorer winks out - usually occurs when copying/pasting or deleting files/icons off the desktop. I can see it being a concern.

 

[gigaherz]

But I am curious as to why explorer winks out - usually occurs when copying/pasting or deleting files/icons off the desktop. I can see it being a concern.

It could be totally unrelated, but most of the times I have had explorer crash/freeze/vanish it was because of unstable shell extensions (those explorer "plugins" that add varied things, from context menu items to thumbnail support or even virtual folders).
I suppose there shoudl be some applications around to let you enable/disable shell extensions so you can check if there's soemthing causing your issues.

EDIT: A quick brought up this app in the first result:
http://www.nirsoft.net/utils/shexview.html

 

[jgarcia2193]

what doesnt make sense to me is that i can change whatever i want to change when logged in as the admin. i cant change jack when i am logged into my account, which is also an admin account. this only seems to be acting this way when i am using a x64 version of 7. when i am on an x86 version, i have god access. it makes my brain hurt especially since there is no reason whatsoever as to why it is acting in such a way.

I WISH WE COULD USE MACs, but unfortunately we dont get that choice at work.

 

[Mysti]

Do you have some kind of offline synchronisation activated for the account having the problems? And is the "open each folder in it's own window" explorer option enabled? Then that might help you:

Explorer.exe crashes on Windows 7 / Server 2008 R2. Message “Server Execution Failed” - ITTips

Solved my problem.

 

[RealTBerry]

Revived Thread

I keep the My Documents folder on an external drive. When I reattached it, the error went away.
If you've recently changed hardware, settings, or unplugged a drive, it may help to temporarily undo that change until you configure your system to live without it.

 

[ProDigit]

Thanks for this thread!
I had installed an extra drive and wanted to plug in an external drive to copy some files to a thumb drive, and the "my computer" icon on the desktop would not want to open anymore.

Standard I have a 128GB SSD, and 1TB HD installed, but this time I added 2x 1TB drives, one external via USB, the other internal via SATA, and a 8GB microSD Card, and that seemed enough to make me lose two freakin hours of my time trying to figure out what the problem is. My AV scanner found no virusses, so I thought it it must have been a win bug!

Regedit did not solve my problem, but like one user said, just change admin privileges.
The problem is I could not open control panel, and neither user accounts.
I had to change from admin to standard user by selecting searching for 'user' in the taskbar and selecting 'create or remove user accounts' because the standard icon 'User Accounts' did not work!

Changing from admin to standard back to admin solved my probs! Thanks guys!

 

[djmeznyc]

If you have the same problem listed in this thread, and there is no problem with your shell folders and mapped folders, there is another option that worked for me. I always check the box in FOLDER OPTIONS to always open folders in a separate process, but for some reason, this can be a problem if you get the server Execution Failed error, so try unchecking that box in Folder options and WAllah, It is really fixed finally.

 

[dondreak]

Hello people,

I just today had this same problem in my Windows 7 profile.
The solution is to go to regedit, and change 2 keys to point to valid places:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\Personal

and

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell  Folders\Personal

You can set back the defaults by looking at how the other entries in those keys look like.

I'm not enterely sure if the second one is necessary, but I changed both to point to valid places and it works now.

In my case both were required. I knew my documents were in another profile but I forgot I moved the folder to the current profile. Thanks for the fix. Don't bother deleting your old profiles people. Too much unnecessary work.

 

[jgperez]

Fixed by restoring drive letter assignment

First of all, THANKS TO EVERYONE who posted in this thread, as it illustrated through various examples that the problem was a missing drive (or, as it turned out in my case, a drive re-mapped from its previous letter assignment), when directories tied to a given user account are involved in one of the partitions on that drive.

I was checking old drives as well as one that seemed to have gone bad on my son's notebook. I connected that one to a serial interface, and an older parallel drive on the only parallel interface on the board, which means it was on the same cable as my "D:" drive, DATA, on which documents, etc., from my user profile are stored.

I usually test on a USB-to-ATA/ATAPI adapter cable, but there were issues with these two drives and I've discovered that sometimes you can fix problems by a normal drive connection, rather than through the USB adapters.

When I rebooted after adding the drives and went to look at them I got the explorer.exe server execution failed error.

To summarize what happened, my computer had assigned the letter "D" to one of the two partitions on the notebook drive. I had done this before (attaching drives to check them) without the computer changing drive letter assignments, just giving them new ones after all the other drives. I was able to fix it by reassigning the letter "D" through the Disk Management section of the Computer Management program.

Now a detailed account. I searched the error and saw the posts about making the administrator account active, so I did that.

I saw the posts about it being a missing drive and thought perhaps my "D" drive had become inaccessible because of the old parallel drive having a problem.

I shut the computer down, removed the added parallel drive, and rebooted but still had the error. So I tried to access the storage section on Computer Management, but could not find computer management by searching for it.

Rebooted into administrator, went into Explorer, saw the "Restore" partition from the notebook drive had been assigned the letter "D:" and my DATA drive was now I:, after other drives.

So I turned off the computer, disconnected the laptop drive, rebooted into my user account, but still had the server execution failed error.

I went to computer management but I had no "run as administrator" option on the right click menu. Ran it anyways, went to drive management, saw that there was no D: drive, and tried to change the letter on DATA back to D: but it did not offer me that choice.

So I rebooted into administrator, went to computer management, did have the run as administrator option, did that, went to drives, and it did show the option to assign D: to the DATA drive.

Rebooted into my user account and everything is working normally.

I've yet to test whether it was something on the notebook drive that forced the use of D: for the restore partition or if there was a problem with my old drive on the parallel interface that made the computer not see my "D" drive and thus it assigned the now-empty letter "D:" to the first partition on the notebook drive.

Before doing that, am going to create a new account for testing, because I think if the problem of letter bumping recurs it will be easier to fix on a user account where nothing is mapped to "D, avoiding (I hope) the "server execution failed" error if it happens.

 

[MacG32]

Just wanted to add this for a possible solution: https://support.microsoft.com/kb/2444677/en-us

It worked for me.

 

[mikolajek]

The MS fix definitely works! I had exactly the same problem when turned off Libraries feature using method described at this forum. Disabling opening Explorer windows in separate processes has helped.

 

[Mugsy]

(More information)

I know this is an ancient post, but just I had this same problem and none of the "solutions" below worked. I found the solution myself:

I didn't realize, but earlier in the day, I had tried to edit my "Send To" list by typing "." (period) from the Run menu to delete unwanted destinations. I must have tried to delete the "My Computer" folder because when I checked "C:\Users\{profile}\", "My Computer" was missing. (If you can't open the File Explorer, use the "File" menu from almost any app to look for it.)

Fortunately, I already had another account with Admin privileges (everyone should, even if you're the only user, in case of disasters like this), copied the "C:\Users\{current profile}\My Computer" folder to the profile that was missing it, rebooted, and now everything is back to normal.

If you don't already have another User Account, create an empty "Read Only" folder in your "C:\Users\{profile}\" called "My Computer" and reboot. I didn't try it myself but it may work.

If that doesn't work, "Windows Repair" from the DVD may be your only option.

Hope this helps someone.

 

[usndd853]

Awesome worked beautifully for me. Thanks so much. I noticed my documents and others were pointing to the wrong drive. Once I corrected this after backing up the registry of course, it worked beautifully. Don't forget to backup the registry when working in it. Mistakes are made.

 

[sxtatic]

This is an old thread, but here's an addition to all that's been said thus far. Had a 750GB HDD, which was partitioned into two partitions - C:\ was 125GB and D:\ was 550GB. Wanted to clone the 125GB System partition C:\ to an 128GB SSD. Had My Documents/My Pictures/My Music/My Pictures/Favorites/Contacts/Downloads/Searches folders redirected from C:\ partition to D:\ partition (this was in case something went wrong with Windows, I could at least save My Documents etc without having to scavenge thru the C:\ partition before reinstalling OS). Tried cloning the C:\ partition from HDD to the SSD with various software (Macrium, AOMEI, Acronis, EASEUS) but something got mixed up with drive letters, apparently, and thus the Server Execution Error.

Anyways, first did the registry trick, but it didn't work. Nevertheless, left the changes that were made to the registry. Rebooted, logged into my account but still was getting 'Server Execution Error'. So, fired up Computer Management, went to Local Users And Groups/Users and enabled Administrator account. Logged into the Administrator account, went into Users/Administrator folder and simply copied My Documents/My Pictures/My Music/My Pictures/Favorites/Contacts/Downloads/Searches folders to Users/sxtatic, since they were all were missing there.


Voila! Along with registry fix, this did the trick. Hopefully this, along with others' contributions, will help someone in need.