Feb. Updates Borked my Win 7 PC

JoWazzoo

New member
Member
Local time
9:31 AM
Messages
57
I held off since in Jan. those Updates messed up my machine. Didn't see a lot of problems, so I installed 6 at once. I guess that was a mistake and I will never install more than one at a time again.

Borked up my machine with No Interconnect Connection. Another 3 hours of my life donated to M$.

I finally thru in the towel and Restored (thank God it worked) to a point from 2 days ago and it seems to be working fine now. All of the Updates are back and awaiting. I will try one at a time and reboot after each. Lesson learned.
 

My Computer

Computer type
PC/Desktop
OS
Windows 7 Pro 64
The key thing you did right in this scenario was that you had a good backup that you could restore. As long as you have that, you're ok to install updates.
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Dell
OS
Linux Mint 18.2 xfce 64-bit (VMWare host) / Windows 8.1 Pro 32-bit (VMWare guest)
CPU
Haswell
Memory
4 GB
Monitor(s) Displays
Acer 23"
Screen Resolution
1920 x 1080
Hard Drives
Two hard drives, 1TB each: One for Linux, one for my data.
Keyboard
IBM Model M
Antivirus
Sophos (Linux), Trend Micro (Windows)
Browser
Firefox, Opera
Other Info
I use Samba to share my data drive with the other computers at my house and with my guest session in VMWare Workstation Player.
The key thing you did right in this scenario was that you had a good backup that you could restore. As long as you have that, you're ok to install updates.

That depends on whether he used System Restore or an image of his System. I found System Restore to be unreliable in XP and I could never get it to work on my Win 7 machines. I always make an image of my C: and System Reserved partitions using Macrium Reflect (I recommend FreeFileSync) before updating Win 7 and any other programs. I have yet to have a verified MR image fail to restore. That way, if something goes sideways, I'm pretty much guaranteed I can easily recover. I've recovered from bad updates and even a dead boot drive (I spent more time removing the dead drive installing a new drive than I did restoring the image to the replacement drive).
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Custom Build
OS
Win 7 Ultimate 64 bit
CPU
Intel i7-3930K
Motherboard
ASUS P9X79 WS
Memory
Kingston HyperX Genesis 32GB Kit (8x4GB Modules) 1600MHz DDR
Graphics Card(s)
MSI R7850 Twin Frozr 2GD5/OC Radeon HD 7850 2GB 256-bit GDDR
Sound Card
Asus Xonar Essence STX
Monitor(s) Displays
3x Asus VG248QE 24", Vizio 32" TV
Screen Resolution
1920 x 1080, ?
Hard Drives
Samsung 128GB 840 Pro SSD (1),
Samsung 4TB 850 EVO SSDs (4)
Samsung 4TB 850 EVO SSDs (16) external backup drives used in 2.5" hot swap bays in the computer.
PSU
Corsair HX750w
Case
Antec Two Hundred v2 (modified)
Cooling
Cooler Master GeminII S524 120mm (fan replaced with a 140mm)
Keyboard
Logitech G510s
Mouse
Logitech M525 (two in use)
Internet Speed
=< 32Mbps down, 8Mbps up
Antivirus
AVAST!, MBAM, SAS, Spybot S&D (all but MBAM free) Glary Util
Browser
IE11
Other Info
LSI 9211-8i HBA card (8 SATA III ports), 2.5" & 3.5" Hot Swap Bays, HooToo HT-CR001 PCI-E to USB 3.0 Internal Hub + 6 Slot Card Reader, and LG Model CH12LS28 BD-ROM Optical Drive. Also, ScanSnap S1500 ADF duplexing scanner, Canon 9000F flat bed scanner, Corsair SP2500 2.1 speakers, Samsung CLP 415nw laser color printer, Cyberpower PP2200SW UPS
I actually did do Restore. But I did have a Backup from Sunday had that not worked. Two months in a row now, Updates Borked me - 2 in a row. Just so frustrating. :(
 

My Computer

Computer type
PC/Desktop
OS
Windows 7 Pro 64
That depends on whether he used System Restore or an image of his System. I found System Restore to be unreliable in XP and I could never get it to work on my Win 7 machines. I always make an image of my C: and System Reserved partitions using Macrium Reflect (I recommend FreeFileSync) before updating Win 7 and any other programs. I have yet to have a verified MR image fail to restore. That way, if something goes sideways, I'm pretty much guaranteed I can easily recover. I've recovered from bad updates and even a dead boot drive (I spent more time removing the dead drive installing a new drive than I did restoring the image to the replacement drive).

Yeah, it sounds like he used "Restore Points" in Windows. In my answer, I was hinting at something more along the lines of Macrium Reflect. I always depend on a third party backup program. Even though I have heard from a reputable source that System Image does a good job when you want to do a system backup and a system restore, I've never understood how to effectively use it as true backup software, so I stick with something I know how to use, such as Macrium Reflect.
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Dell
OS
Linux Mint 18.2 xfce 64-bit (VMWare host) / Windows 8.1 Pro 32-bit (VMWare guest)
CPU
Haswell
Memory
4 GB
Monitor(s) Displays
Acer 23"
Screen Resolution
1920 x 1080
Hard Drives
Two hard drives, 1TB each: One for Linux, one for my data.
Keyboard
IBM Model M
Antivirus
Sophos (Linux), Trend Micro (Windows)
Browser
Firefox, Opera
Other Info
I use Samba to share my data drive with the other computers at my house and with my guest session in VMWare Workstation Player.
Yeah, the Feb update caused me to do a restore. MS has screwed it up 3 months in a row, and every time the update won't install, I think there's something wrong with my machine, till I check my forums.

Problem with restoring from my Macrium is that it's not from the day before.
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
HP p6-2020t
OS
Win 7 Ult 64-bit
CPU
G620 2.6GHZ Pentium R
Memory
6 GB
Monitor(s) Displays
25" HPLV2311
Screen Resolution
1920 x 1200
Hard Drives
1 SATA, 1 exterior SATA
Case
HP
Cooling
PSU
Antivirus
Glasswire
Browser
Waterfox; Firefox; Chrome for work
Other Info
Firewall--Glasswire
Similar specs in Gateway DX4200
Verizon FIOS Wired network

1 other Win7 computer-- has SSD
The key thing you did right in this scenario was that you had a good backup that you could restore. As long as you have that, you're ok to install updates.
Not really... if the PC you update is a Dell and you're installing their BIOS update you can totally brick your motherboard. And Macrium Reflect won't even help a little bit.
 

My Computer

Computer type
Laptop
OS
Windows 7 home premium 64 bit
CPU
AMD K10
Motherboard
Hewlett-Packard 1444 (Socket S1G4)
Memory
3.00GB Dual-Channel DDR3 @ 532MHz
Graphics Card(s)
ATI AMD M880G with ATI Mobility Radeon HD 4250 (HP)
Sound Card
Realtek
Screen Resolution
1366 x 768
Hard Drives
465GB Western Digital
Antivirus
MSE
I held off since in Jan. those Updates messed up my machine. Didn't see a lot of problems, so I installed 6 at once. I guess that was a mistake and I will never install more than one at a time again.

Borked up my machine with No Interconnect Connection. Another 3 hours of my life donated to M$.

I finally thru in the towel and Restored (thank God it worked) to a point from 2 days ago and it seems to be working fine now. All of the Updates are back and awaiting. I will try one at a time and reboot after each. Lesson learned.
wait u saying that there's updates that need a reboot but where windows doesn't tell you to reboot? :shock:
 

My Computer

Computer type
PC/Desktop
OS
windows
I Hid 2 Updates that were somehow showed me. Dated 2015. Hmmmm Checked em out and they were Telemetry garbage taken from Windows 10 to screw with Win 7 & 8 users. So I hid them. Then I installed the first Update, Rebooted and my screen was frozen (mouse pointer). So Cold reboot to Safe Mode and Restore again. Screw their effing Updates.

Yes - Updates can suggest or require reboot or just take a pass. Some reboot themselves.
 

My Computer

Computer type
PC/Desktop
OS
Windows 7 Pro 64
Back
Top