Firewall is off when booting Windows

Oimet

New member
Local time
11:38 PM
Messages
4
Hello!

I recently bought an Intel 520 240GB SSD. I installed it in my PC, removed the SATA cable of my old HDD and then booted the computer.
After that I activated AHCI in BIOS and installed Windows 7 professional x64 on my new SSD.

Then I followed all steps in the following guide:
Guide Advanced User Windows 7 Complete Installation Guide For SSD's (for normal use most of these tweaks are NOT needed.

Shut down my PC and plugged in the old HDD again, booted from my SSD and formatted the HDD. And now I am using it for storage.
Just writing all this down because maybe I have done something wrong.

Okay to my problem. When I booted my PC and start browsing the internet I noticed that everything was extremely slow. But no one else is downloading/streaming so it should work fine. That's when I noticed my firewall was OFF. I tried to turn it on again but the window froze, I waited for about one minute and then the following error message appeared:
"Windows Firewall can't change some of your settings. Error code 0x8007042c"
This has happened some times now.

My first thought was that I had a virus, but that would be strange because I had installed windows only hours earlier, and I did not visit any suspicious sites.
All windows updated were installed and drivers installed etc. And Avast! Antivirus was one of the first programs I installed.

I have scanned my computer with Avast and Malwarebytes Anti-Malware several times. Both quick and full scans, but nothing was found.

When I restart my computer the firewall is often on again and browsing the internet is now fast again.
But next time I boot it up, the firewall could be off again, and internet browsing is slow.

I would Really appreciate some help with this issue.

Thank you in advance!
 

My Computer

OS
Windows 7 Professional x64
Is it necessary to do all those things in the SSD guide? I'm going to reinstall windows.
 

My Computer

OS
Windows 7 Professional x64
Okay so I reinstalled windows 1 week ago and everything was fine, this problem did not occur again. Untill today.
I booted Windows and got a message from the "action center" that I should turn on my firewall. So I treid to do so but got the same error message again.

"Windows Firewall can't change some of your settings. Error code 0x8007042c"

I have not installed anything recently, and I haven't been to any other sites than the ones I visit often and I am 100% sure that they are safe.
So it just happened for no reason at all.. I really need help with this.
Again when this happens, It is very slow to browse the internet. And if I restart Windows the firewall is on again and everything works fine.
There are no suspicious processes running when this happens.

There is just no way that it is a virus, because I have only installed a few programs. Which I know are safe. for example, Avast, CCleaner, Skype, Steam etc. And as I said only visited safe websites.

I really need some help with this. Please!
 

My Computer

OS
Windows 7 Professional x64

My Computer

Computer type
Laptop
Computer Manufacturer/Model Number
HP pavilion DV6
OS
win7 home premium-64bit-SP1-IE10
CPU
T6600 2.2Ghz
Motherboard
HP Model 3628
Memory
4 Gb
Graphics Card(s)
ATI Mobility Radeon HD 4530
Sound Card
IDT High Definition
Screen Resolution
1366x768 @ 60Hz
Hard Drives
500Gb Western Digital
Antivirus
MSE
Other Info
Malwarebytes Antimalware + Spybot-Search&Destroy
You don't need to do anything listed in that thread. Some of them will actually reduce performance. You'll notice that the guide is over two years old. It was created when the standard SSD size was 30 GB. The steps listed are to minimize the disk space used by Windows. With a 240 GB SSD and a HDD used for storage those steps are no where near necessary. They wouldn't even be necessary with a 60 GB SSD.

EDIT: Also, this article is from Microsoft and list steps for dealing with this issue. I would concentrate on Method 2 & 3.

http://support.microsoft.com/kb/2530126
 

My Computer

Computer type
Laptop
Computer Manufacturer/Model Number
Toshiba P775-S7100
OS
Windows 7 Professional SP1 64-bit
CPU
Intel Core i5-2450M @2.5 GHz
Memory
6 GB DDR3 1333MHz
Graphics Card(s)
Intel HD 3000
Monitor(s) Displays
Built-in 17.3" LED; 22" Insignia NS-L22Q-10A
Screen Resolution
1600x900; 1360x768
Hard Drives
750 GB Hitachi
1TB Seagate FreeAgent External
Internet Speed
Verizon DSL Speed(Down/Up): 3360 Kbps / 800 Kbps
Antivirus
MSE and MBAM Pro
Browser
IE10
Thank you! I will try these things next time it happens. I don't really understand how this can happen right after installing windows. This has never happened before on any other W7 machines, but when installing it on my new ssd this suddenly happens, twice. It's like it's because of the ssd.
 

My Computer

OS
Windows 7 Professional x64
Back
Top