FireWall OFF !?

[mssch]

Hi
I disabled the firewall on my system Windows 7 firewall settings to enable it but I am going to have the photo taken off the firewall ?
Picture:

 

[tom982]

Hello mssch and welcome to the forums

Try this:

Command Prompt

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Click on the Start
   
   button and in the search box, type Command Prompt
2. When you see Command Prompt on the list, right-click on it and select Run as administrator
3. When command prompt opens, copy and paste the following commands into it, press enter after each
   
   netsh advfirewall reset
   
   netsh advfirewall set allprofiles state on
   
   
4. Right-click on the Command Prompt window and click Select All, this will invert all of the colours by selecting the text, now press enter. All of this text is now copied.
5. Paste (Ctrl+V) it into your next post please.

Tom

 

[mssch]

But I did not change
&
How do I fix the problem
Code: Code 80072EFD

 

[NoelDP]

Please download the Farbar Service Scanner from

http://www.bleepingcomputer.com/download/farbar-service-scanner/

Run it, and tick all the options, then click on the Scan button - copy and paste the report to your response.

 

[mssch]

This is what Farber in a text file with

Internet Services:
============

Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo IP is accessible.
Yahoo.com is accessible.
IE proxy is enabled.



Windows Firewall:
=============

Firewall Disabled Policy:
==================


System Restore:
============

System Restore Disabled Policy:
========================


Action Center:
============

Windows Update:
============

Windows Autoupdate Disabled Policy:
============================


Windows Defender:
==============

Other Services:
==============


File Check:
========
Windows\system32\nsisvc.dll => MD5 is legit
Windows\system32\Drivers\nsiproxy.sys => MD5 is legit
Windows\system32\dhcpcore.dll => MD5 is legit
Windows\system32\Drivers\afd.sys => MD5 is legit
Windows\system32\Drivers\tdx.sys => MD5 is legit
Windows\system32\Drivers\tcpip.sys
[2013-03-29 20:36] - [2013-01-03 09:35] - 1293672 ____A (Microsoft Corporation) 7C0507D2391AF5933600CBCED799F277

Windows\system32\dnsrslvr.dll => MD5 is legit
Windows\system32\mpssvc.dll => MD5 is legit
Windows\system32\bfe.dll => MD5 is legit
Windows\system32\Drivers\mpsdrv.sys => MD5 is legit
Windows\system32\SDRSVC.dll => MD5 is legit
Windows\system32\vssvc.exe => MD5 is legit
Windows\system32\wscsvc.dll => MD5 is legit
Windows\system32\wbem\WMIsvc.dll => MD5 is legit
Windows\system32\wuaueng.dll => MD5 is legit
Windows\system32\qmgr.dll => MD5 is legit
Windows\system32\es.dll => MD5 is legit
Windows\system32\cryptsvc.dll => MD5 is legit
Program Files\Windows Defender\MpSvc.dll => MD5 is legit
Windows\system32\ipnathlp.dll => MD5 is legit
Windows\system32\iphlpsvc.dll => MD5 is legit
Windows\system32\svchost.exe => MD5 is legit
Windows\system32\rpcss.dll => MD5 is legit

 

[NoelDP]

According to FarBar, your Firewall should be active.

Please run the following commands and post the results.

SC QC MPSSVC
SC QUERYEX MPSSVC


Here are some instructions to make life easier
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories – then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight – select Copy. In the CP Window, click on the black/white icon at top left – select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
3) To copy the results... click on the Black/White icon in the top left, and select Edit... 'Select All', and hit the Enter key - then use Ctrl+V or r-click+Paste to paste it into your response.

 

[mssch]

CMD Command Prompt Did not I?

 

[NoelDP]

CMD Command Prompt Did not I?

Pardon?

 

[mssch]

CMD Command Prompt Did not I?

Pardon?

Did I not command the same CMD?
CMD=Command Prompt

 

[mssch]

I see the command Prompt that will open a text file with Notepad

 

[NoelDP]

Please follow my instruction #1 - what happens?

 

[mssch]

Please follow my instruction #1 - what happens?

When I click on the command Prompt opens a text file that is unreadable...

 

[NoelDP]

Sounds like your shortcut is corrupted.

right-click on your desktop. select 'New..' > Shortcut
In the Location box, type
%windir%\system32\cmd.exe
click Nest
In the name box, type COMMAND PROMPT
click OK
now right-click on the shortcut created, and in the 'Start in' box, type
%HOMEDRIVE%%HOMEPATH%
click OK

now right-click on the shortcut, and select Run as Administrator
what happens?

 

[mssch]

I opened up the picture

 

[NoelDP]

That's the proper result - but you didn't select Run as Administrator, by the look of it.

now enter the commands as in my instructions #2
then copy/paste the results, as my instructions #3

 

[tom982]

Hi mssch,

Try this:

Command Prompt

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

1. Click on the Start
   
   button and in the search box, type Command Prompt
2. When you see Command Prompt on the list, right-click on it and select Run as administrator
3. When command prompt opens, copy and paste the following commands into it, press enter after each
   
   SC QC MPSSVC
   SC QUERYEX MPSSVC
   
   
4. Right-click on the Command Prompt window and click Select All, this will invert all of the colours by selecting the text, now press enter. All of this text is now copied.
5. Paste (Ctrl+V) it into your next post please.

Tom