Frequent BSOD

[JexMcByte]

Windows 7 x86
Windows 7 Ultimate instaled on 2009 dec (Full Retail)
Hardware is with me for almost 2 years, belonged to the company that sold me for about a year (guess) but last year I had the motherboard exchanged by support and at the same time I installed the Windows 7 (prior was Windows XP)

Any help is appreciated.

 

[Capt.Jack Sparrow]

Hello and Welcome !

Seems like the Dump files are pointing to Core Windows Files which maybe not be the problem so lets run some basic steps. Run a Hardware Diagnostic (Memory and Hard Drive) follow this link for instructions Hardware Diagnostic !! « Captain Debugger

Uninstall sptd.sys which is notorious for BSOD. Follow this guide DuplexSecure - FAQ

Update the Following Drivers

PxHelp20.sys Tue Jul 25 05:48:21 2006
xpvcom.sys   Wed Mar 21 12:15:59 2007
Rtnicxp.sys  Mon Mar 31 11:11:05 2008
mv2.sys      Thu Feb 07 02:32:34 2008

Bugcheck:

PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced.  This cannot be protected by try-except,
it must be protected by a Probe.  Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: a796c337, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 8544f44a, If non-zero, the instruction address which referenced the bad memory
    address.
Arg4: 00000000, (reserved)

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from 85574718
Unable to read MiSystemVaType memory at 85554160
 a796c337 

FAULTING_IP: 
nt!KiFastCallEntry+12a
8544f44a f6456c01        test    byte ptr [ebp+6Ch],1

MM_INTERNAL_CODE:  0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0x50

PROCESS_NAME:  dwm.exe

CURRENT_IRQL:  0

TRAP_FRAME:  a7963cc0 -- (.trap 0xffffffffa7963cc0)
ErrCode = 00000000
eax=00000000 ebx=8563d6df ecx=8563d772 edx=00000000 esi=0322fcac edi=00000000
eip=8544f44a esp=a7963d34 ebp=a796c2cb iopl=0         nv up ei pl zr na pe nc
cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010246
nt!KiFastCallEntry+0x12a:
8544f44a f6456c01        test    byte ptr [ebp+6Ch],1       ss:0010:a796c337=??
Resetting default scope

LAST_CONTROL_TRANSFER:  from 85452638 to 85491903

STACK_TEXT:  
a7963ca8 85452638 00000000 a796c337 00000000 nt!MmAccessFault+0x106
a7963ca8 8544f44a 00000000 a796c337 00000000 nt!KiTrap0E+0xdc
a796c2cb 00000000 00000000 00000000 00000000 nt!KiFastCallEntry+0x12a


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!KiFastCallEntry+12a
8544f44a f6456c01        test    byte ptr [ebp+6Ch],1

SYMBOL_STACK_INDEX:  2

SYMBOL_NAME:  nt!KiFastCallEntry+12a

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

IMAGE_NAME:  ntkrpamp.exe

DEBUG_FLR_IMAGE_TIMESTAMP:  4c1c3fac

FAILURE_BUCKET_ID:  0x50_nt!KiFastCallEntry+12a

BUCKET_ID:  0x50_nt!KiFastCallEntry+12a

Followup: MachineOwner
---------

Hope this helps,
Captain

 

[JexMcByte]

Havent done all that was requested but
- SPTD removed
- memory test done, passed
- hard disk test (not done yet)

Another problem that I had was one message stating that my nvidia driver kernel mode stopped working, for that I followed some instructions on nvidia forum.

But the problem remains, i just had a bsod.

 

[Capt.Jack Sparrow]

Havent done all that was requested but
- SPTD removed
- memory test done, passed
- hard disk test (not done yet)

Another problem that I had was one message stating that my nvidia driver kernel mode stopped working, for that I followed some instructions on nvidia forum.

But the problem remains, i just had a bsod.

Follow this article and run some stress tests http://www.sevenforums.com/748030-post2.html

- Captain