Solved From XP to WIN 7

[shankly769]

as i went to boot menu i saw these:-
1-HITACHI
2-IDEI:
3-USB FDD
4-NETWORK BOOT ATHEROS BOOT AGENT
5:USB HDD:
6:USB CD ROM

and in a menu MAIN:-

quick boot-enabled
netboot:enabled
f12 boot menu :disabled
d2d recovery:enabled
sata mode;(ahci)

what should i use as i tried all usb numbers except the network boot and didn't boothed

 

[gregrocker]

Go back into BIOS setup, Enable F12 Boot Menu, Save setting and exit. Then tap the F12 key at boot to trigger installer.

Hitachi is your SATA HD, correct?

Unplug all other HD's and periperhals.

Be sure to delete all partitions at Steps 7 and 8 of http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html to create new ones as you please, or jsut click Next to let installer do it for you and begin.

Have your network driver in the backup so you can install it to get online if its not provided by the installer, then enable http://www.sevenforums.com/tutorials/2803-device-installation-settings.html and run all rounds of Important and Optional Updates to completion. If any drivers are still missing after all Updates are done then import them from the Suppport downloads webpage for the model.

 

[shankly769]

Go back into BIOS setup, Enable F12 Boot Menu, Save setting and exit. Then tap the F12 key at boot to trigger installer.

Hitachi is your SATA HD, correct?

Unplug all other HD's and periperhals.

Be sure to delete all partitions at Steps 7 and 8 of http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html to create new ones as you please, or jsut click Next to let installer do it for you and begin.

Have your network driver in the backup so you can install it to get online if its not provided by the installer, then enable http://www.sevenforums.com/tutorials/2803-device-installation-settings.html and run all rounds of Important and Optional Updates to completion. If any drivers are still missing after all Updates are done then import them from the Suppport downloads webpage for the model.

im to switch on another netbook so i keep this reply on board and i tryy what you sugested

yes hitachi is the sata hd,i have 1 partition as c drive only

 

[shankly769]

yes it boothed from f12,but what should i choose now x86 or x64?

 

[gregrocker]

If this is the Atom with 2gb I would use 32 bit..

Be sure to follow the same steps in http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html#post1839164
for handling drivers and setting it up perfectly.

Where are you getting Win7 for this upgrade? How is it being activated?

 

[shankly769]

ok,i went to x64 and is in installing phase,but i forgot to format,but i chose the upgrade to a newer version,as im from win xp to win 7,i think it will format automatically?

 

[shankly769]

finally ok,i had to go to x86,
win 7 installed,

thanks 4 now

 

[shankly769]

thanks for every help,work succeeded thanks to you all
well done.

 

[gregrocker]

How is performance? Any issues? You can go over your install to check it over good using http://www.sevenforums.com/tutorials/220165-troubleshooting-steps-windows-7-a.html.

Sounds like you are happy so far. Congrats on that