Getting lots of BSOD errors(0x000000d6,0x000000c9 and other)

[nemesismonkey]

This all started happening last night, I would constantly get a prompt saying that some program has stopped responding and to close it. As soon as I close it, few minutes later it happens again. Only thing is that it was not really a program, it was just gibberish.exe. I even tried to look at the fault path but there was never any program tho.

After that happened maybe 10 times, I get my first BSOD. I start trying to figure what happened, same thing again. I figure it might be the new graphics card(an msi 7870), so I uninstall it and reinstall my old one. Same thing happens so I just call it a night.

I started it up this morning and I notice that the network icon is taking forever to load up and my antivirus gets stuck and takes forever to load(this usually happens in a few seconds, now it is taking minutes) and a little while longer I get the error message, but instead of choosing close the program I just minimize the dialog and it seems to run smooth for a good time. After a while tho, it gives another BSOD. This is where I read about the verifier program. So I run that a few times, and i see it states EtronXHCI.sys as the fault, Etron is the usb3.0 bus driver. So I uninstall it, and the first restart it boots up quick like usual. I try to boot up again but this time it is back to being slow. So I reinstall thinking that is not the problem.

After this I switch the new card(7970) back in and try to install it because at this point I know it isnt the driver. So I uninstall the old driver, turn it off and put the new card back in. Only this time I am unable to install the the driver. Says it can not locate a supported device. I look in the device manager and see the 7970 is listed as a Standard VGA Display, and any further attempts to install fail.

So I boot into safemode(been on it almost 5 hours now), computer is snappy and no errors. This leads me to believe it has to be a conflict/corruption/something along those lines causing this issue.

I hope I adequately described my situation and I can get some help. I just put this new system together over the past couple months so having such a crippling issue is a little disheartening.

 

[Arc]

ATI DSM Dynamic Driver (\??\c:\users\xe\appdata\local\temp\atdcm64a.sys) is failing.

BugCheck C9, {20e, fffff880098fd432, fffff980151ecea0, 0}

*** WARNING: Unable to verify timestamp for atdcm64a.sys
*** ERROR: Module load completed but symbols could not be loaded for atdcm64a.sys
[COLOR=Red]Probably caused by : atdcm64a.sys[/COLOR] ( atdcm64a+2432 )

Followup: MachineOwner
---------

As it is in temps, follow it: http://www.sevenforums.com/tutorials/306648-ccleaner-delete-junk-files.html

Etron USB 3.0 Extensible Host Controller Driver (c:\windows\system32\drivers\etronxhci.sys) is also failing.

BugCheck D6, {fffff9801711301e, 1, fffff88006310016, 0}

*** WARNING: Unable to verify timestamp for EtronXHCI.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronXHCI.sys
*** WARNING: Unable to verify timestamp for EtronHub3.sys
*** ERROR: Module load completed but symbols could not be loaded for EtronHub3.sys

Could not read faulting driver name
[COLOR=Red]Probably caused by : EtronXHCI.sys[/COLOR] ( EtronXHCI+d016 )

Followup: MachineOwner
---------

And the driver is too old.

fffff880`06c10000 fffff880`06c1fc00   EtronXHCI T (no symbols)           
    Loaded symbol image file: EtronXHCI.sys
    Image path: \SystemRoot\System32\Drivers\EtronXHCI.sys
[COLOR=Red]    Image name: EtronXHCI.sys
    Timestamp:        Sat Jan 29 03:16:43 2011[/COLOR] (4D433943)
    CheckSum:         0001BA95
    ImageSize:        0000FC00
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Asrock does not have any feasible update. Get it from Etron Technology, Inc..

Now disable driver verifier. Run the computer normally. Let us know how it is running.