Gimagex problem!!

[Cruxx]

Hello,

Looking for help resolving this issue:

I used Make_Pe3 to create my Win_Pe ISO, now i use Gimagex to capture image of the drive, that completes with no errors, but when i apply same wim file to new PC it will boot with error BOOTMGR is missing. Could anybody help me with this?

 

[zigzag3143]

Hello,

Looking for help resolving this issue:

I used Make_Pe3 to create my Win_Pe ISO, now i use Gimagex to capture image of the drive, that completes with no errors, but when i apply same wim file to new PC it will boot with error BOOTMGR is missing. Could anybody help me with this?

sorry but you are going to have to be more specific. I am confused

 

[Cruxx]

Sorry if i wasn't clear in my original post, i boot test PC from Win_PE disk, here i used Gimagex to capture image of test PC and stored wim file on my Network drive. I would like to apply this image to different PC but after i power on PC missing BOOTMGR error shows.

After some research found the solution here:0xc000000e error when deployed with Imagex

 

[Old]

Image on network

Sorry if i wasn't clear in my original post, i boot test PC from Win_PE disk, here i used Gimagex to capture image of test PC and stored wim file on my Network drive. I would like to apply this image to different PC but after i power on PC missing BOOTMGR error shows.

After some research found the solution here:0xc000000e error when deployed with Imagex

Gimagex ??? I have tried with Norton Ghost 2003 ( Ver 9) and version 14 for XP SP3 -- NOT working. After 50% I got message "lost network....."

I tried Acronis 2009 Home same thing. Then I transfered 2 Movies ( 7.5 Gb and 6.1 Gb) and NO error. So image on network DOES NOT work for me.

Each PC has 2 network cards 1 for router, modem (100Mbs) and 2nd for direct connection to other PC (1 Gbs). Router is Netgear 834. 2nd NIC uses different IP address.

If I use Ghost 2003 for W7 or Vista I got that message "missing ....." and it does NOT boot. So test that program on XP and then try W7 or Vista.