headphone jack unplugged

[jeevan]

my front panel head phone jack s not detected ... it shows dat its unplugged in control panel sound devices....
earlier it was working perfectly. n recently i reinstalled windows 7 after re installing ,the headphone jack is not detected..
please help me......

 

[johnnya]

Hi Jeevan and welcome to the Forum. After you re-loaded Windows, did you reload the ASUS on-board sound drivers from the ASUS CD?

Regards
JohnnyA

 

[jeevan]

let me try really thanks for ur reply dude ........... salaaam.......

 

[jeevan]

sorry yar dat din work..........

 

[jeevan]

please help

 

[johnnya]

Hi again Jeevan. A couple of things you may look at.
1. Have you made any changes inside your tower? Is the front Audio Panel
correctly connected to the correct plug on the Motherboard?

2. Have a look in your BIOS. Under Onboard drvices, HD Audio Controller - make
sure this is enabled.

3. Does the Mic on the front Audio Panel work?

4. Are you sure you have your headset plugged in to the speaker jack and not
the Mic jack?

5. Have you tried your Headset on another system to ensure they work?

6. Does the Speaker and Mic jacks on the back of your tower work?

These are the only things I can think of at the moment. Let me know how you
make out.
Regards
JohnnyA

 

[jeevan]

in the back it works n all the internal connections r correct nly......yea the headset s working nly....ya i connected to the headset jack nly...... i din check the bios....... i dont have mic yar.......

 

[jeevan]

dat dint work......

 

[jeevan]

no yar....... dat was another failure i din find hd audio controller option in my bios.. please help me out,........

 

[suman6792]

at first tel me your mother board and the name of sound driver

 

[jeevan]

motherboard asus p5kpl... n audiodriver s realtek..

 

[suman6792]

just follow this--- at first go to realtek sound manager and then select device advanced setting and select the other option and after this you will see a folder image at right top corner, select this and choose the other option and click on ok. now your headphone setting are ready. then you will see tow extra tabs one is headphone and other is microphone. now you will see a tik mark on the loud speaker, select the headphone tad and click on the SET DEFAULT DEVICE now you are ready. if you want to get back to your speaker just do vise varsa . (pls don't mind for my broken english)

 

[jeevan]

sorry suman........ ididnt find OTHER OPTIONS FROM device advanced settings....
my system doesnt detect d front panel.......... earlier it was working fine...... but after i re installed the windows 7 it shows dat d front panel not plugged in ........... wat to do man ..... r u an indian?

 

[suman6792]

ok then try this go to realtec audio setting >select device advanced settings > then tik to the MAKE FRONT AND REAR OUTPUT DEVICES PLAYBACK TWO DIFFERENT AUDIO STREAMS SIMULTANEOUSLY> click to ok > now click to the CONNECTOR SETTINGS( a small folder picture)> tik to the DISABLE FRONT PANEL JACK DETECTION> CLICK ON OK . THAT ALL

YES I AM AN INDIAN

BY THIS PROCESS YOUR FRONT JACK DETECTION WILL BE STOP THEN YOUR FRONT PANAL WILL BE ALAWAYS ACTIVE FOR YOUR HEADFONE.