Solved HELP BSOD Then Error Please insert a proper boot device

[Donliridon]

Hello ive built a brand new computer and, i reformat everythings seems working but after i installed a game after 10 min i get bluescreen then i try start computer i get this error Please insert a proper boot devoce or media or press any key something, and i still have this problem for 2-1 days its a brand new computer how can that even happend please help me....

 

[wish]

What game that you installed on your computer?
Seems the error can be caused by boot loader corruption or faulty media such as hardisk unplugged.
For software related, you can try this method:
http://www.sevenforums.com/tutorials/681-startup-repair.html

Also open command prompt at startup then type:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
bootsect /nt60 ALL

 

[Donliridon]

What game that you installed on your computer?
Seems the error can be caused by boot loader corruption or faulty media such as hardisk unplugged.
For software related, you can try this method:
http://www.sevenforums.com/tutorials/681-startup-repair.html

Also open command prompt at startup then type:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
bootsect /nt60 ALL

i was installing world of warcraft from battle.net:S

i couldent do startup repair since the harddiskent dident show up at all :S

ok i tried bootrec /fixmbr in the command prompt it told me The device is not ready
and i tired bootrec /fixboot dident work also told me same thing but when i tried bootrec /rebuildbcd it worked. and nt60 it showed me alot of numbers.

 

[jcgriff2]

Sounds like it may be an HDD related problem. Is the HDD new?

Run HDD diagnostics - SeaTools (for DOS) - http://www.seagate.com/ww/v/index.j...toid=720bd20cacdec010VgnVCM100000dd04090aRCRD

Burn ISO to CD with ImgBurn - http://www.imgburn.com/index.php?act=download

Boot with SeaTools CD; run LONG test.

Also, check cables.

Regards. . .

jcgriff2

.

 

[Donliridon]

JCgriff2 ok i did the test, but when i was inside that program it told me No hard drives found if you belive this to be incorecct m check cables drive power connection and jumper settings and then try again. WTF:

 

[jcgriff2]

Yeah... either the HDD is beyond dead or as you said - cables, jumpers, etc...

I'm having a hell of a time with an old Dell 2400 - replacing HDD. Gone through several HDDs (even some from other Del 2400s); none being seen in BIOS. But the bad HDD is! Frustrating to say the least.

Is your HDD new?

You can see it in BIOS?

 

[Donliridon]

nope i took from the other computed i used and i just kinda boughtstuff like a computer all other stuff but not the Harddrive. ok heres some screenshot from the comp, no i cant see the harddrive in the bios:S

 

[Donliridon]

i took this harddrive to this computer im using now and made the test from the windows and got this..

Now is a good time to make sure you have a current backup of your important data.
Unfortunately, your Seagate product has failed an important diagnostic test, possibly caused by problem sectors which are difficult to read. Seagate recommends that you run SeaTools for DOS, which has the ability to repair most problem sectors. SeaTools for DOS may be able to save you from the inconvenience and down time of exchanging the drive. For more information on this subject

2011-10-09 00:14:54
Model: Maxtor 6V250F0
Serial Number: V5066RTG
Firmware Revision: VA111630
Short DST - Started 2011-10-09 00:14:54
Short DST - FAIL 2011-10-09 00:14:55
SeaTools Test Code: DDA9A2EB

gived me wtf

 

[Donliridon]

This is what i did over the night i removed the HDD, and had the Cables unplugged for the night took 1 HDD from my Computer, and i booted the W7 DVD CD then it finally showed in BIOS and even in W7 Drivers so i could Install The operative system finally im glad if its working right now.

i got it fully worked and then i restarted computer.. then it goot the same error WTFFF SOMEONE
CAN ANYOBODY HELP ME?

 

[jcgriff2]

Have you tested the remaining HDD and the RAM?

memtest86+ - http://www.techsupportforum.com/2863029-post5.html

HDD diags -
- http://www.carrona.org/hddiag.html
- http://www.techsupportforum.com/2828431-post7.html

Regards. . .

jcgriff2

`

 

[jcgriff2]

I just noticed -- the RAM stick on the right is not properly seated.

Reseat RAM; Push down FIRMLY on each end, you'll hear a click and the white clips will snap into place like the others.

Regards. . .

jcgriff2

`

 

[Donliridon]

thats the thing i did one of the test inside windows when i formated it and it said it was passt all the test:S then i restarted computer baam the damn error.. yeah that one wasent seated probably thanks but it still dident fix the issue ; but i went to the motherboard statistics and i found that it only supports 3.0GB/S SATA HDD and the HDD I use is 1.5GB/S you think that might be the error?


Asus Page, Storage Built-in Controller :
6 x SATA 3Gb/s port(s), blue
Support Raid 0, 1, 10, JBOD SATA 3GB/s my Harddisk is 1.5 GB/s do you think that could be the problem?

 

[jcgriff2]

I asked someone who knows hardware better than I and he replied -

It should be backwards compatible . . when you go the other way e.g. Sata I controller with a Sata II drive, you have to change the jumper

 

[Donliridon]

OK thanks all for you're support i got a new motherboard seemd to fix the problem it was a motherboard issue, so this thread is solve thanks all for you'r help, the problem was the damn frikkean Motherboard!!