Help Me: BSOD 2 different ones 0x000000F4 then 0x0000001E

[INEEDHELPNOWEV]

Hopefully I'm doing this right. I'm not the best with computers. Went to various online forums to try and do it myself. I'm worried I might have screwed things up further. My minidump file is attached. What else do you need from me. I'll do the best I can.

I really do appreciate the help, everyone.

 

[INEEDHELPNOWEV]

I've seen this all over these forums. I have no idea what it means, but it looks like it helps people.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: f4
BCP1: 0000000000000003
BCP2: FFFFFA800865AB10
BCP3: FFFFFA800865ADF0
BCP4: FFFFF8000318EE70
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\082615-29172-01.dmp
C:\Users\Steven Valenti Inc\AppData\Local\Temp\WER-53835-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Seriously ladies and gents I appreciate anything you can tell me.

 

[Laith]

Hiya and welcome to SevenForums!rb:

BugCheck F4, {3, fffffa800850ab10, fffffa800850adf0, fffff80003190e70}

Probably caused by : csrss.exe

BugCheck 1E, {ffffffffc0000005, fffff80002f188db, 0, 7fef2d3d}

Probably caused by : tcpip.sys ( tcpip!LruContext+6c0 )

BugCheck 1E, {ffffffffc0000005, fffff80002f048db, 0, 4205}

Probably caused by : ntkrnlmp.exe ( nt!output_l+31b )

Run sfc /scannow and chkdsk /r.
Install the latest updates from Windows Update.

Do the exact same steps for chkdsk /r but instead of typing in sfc /scannow type chkdsk /r.

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

There's an 0xF4 code in your bugchecks. This could mean that there's a virus, a failing harddrive, failing RAM stick/s. Run SeaTools(DO NOT RUN FOR SSDS) http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html Also run MemTest86+ for 8 passes. It must be MemTest86+. http://www.sevenforums.com/tutorials/105647-ram-test-memtest86.html Scan your computer for viruses using Malwarebytes. http://www.sevenforums.com/tutorials/338716-malwarebytes-anti-malware-free.html

Also update your networking driver.

 

[INEEDHELPNOWEV]

Thank you for responding Laith!

Ran the sfc /scannow on accident and it says it found corrupt files and corrected them. That sounds like a good thing to me.

Then I typed chkdsk /r and it came up with: "The type of the file system is NTFS. Cannot lock current drive. Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)" I picked Y because I assume this needs to happen.

Next step??

 

[Laith]

Restart the computer and let chkdsk run.

 

[INEEDHELPNOWEV]

So I did the chkdsk step, the SeaTools scan, and the Malware scan. Malware found a lot of stuff, so I deleted it, restarted, and running another scan just to see if everything is gone. I have that last step to do, and I just have to find an empty flash drive somewhere and then all of it will be done.

Just wanted to give you an update on how things were progressing, Laith. Seriously, thank you so much for the help. It's greatly appreciated.

 

[Laith]

Hope your computer is BSOD-Free now.

No problem! It's my duty to help!

 

[INEEDHELPNOWEV]

Laith

For some reason it doesn't let me put MemTest86+ on my flash drive. Any particular reason it has to be on a flash drive?

 

[Laith]

It can be on a DVD, on whatever is bootable.

But this can also mean that the HDD is failing.
Run SeaTools(DO NOT RUN FOR SSDS) http://www.sevenforums.com/tutorials/313457-seatools-dos-windows-how-use.html

 

[INEEDHELPNOWEV]

Here's my log for SeaTools

--------------- SeaTools for Windows v1.4.0.2 ---------------
9/4/2015 5:58:51 PM
Model Number: HD642JJ
Serial Number: S1JNJ90Z228952
Firmware Revision: 1AA01117
Long Generic - Started 9/4/2015 5:58:51 PM
Long Generic - Pass 9/4/2015 7:55:21 PM
Fix All Long - Started 9/5/2015 10:22:00 AM
Fix All Fast - Started 9/5/2015 10:22:20 AM
Fix All Fast - Pass 9/5/2015 10:24:13 AM
Fix All Long - Started 9/5/2015 11:13:34 AM
Fix All Long - Started 9/5/2015 1:48:11 PM
Fix All Long - Pass 9/5/2015 3:50:51 PM
Short Generic - Started 9/9/2015 12:09:05 PM
Short Generic - Pass 9/9/2015 12:10:33 PM
SMART - Started 9/10/2015 11:20:32 AM
SMART - Pass 9/10/2015 11:20:37 AM


I feel like I'm doing something wrong here.

 

[Laith]

Have you run MemTest86+?

 

[INEEDHELPNOWEV]

I haven't had the time to buy a new flash drive to test it out yet. I've just had a crazy schedule.

 

[Laith]

Hope your okay, report back when you have run MemTest86+.

 

[INEEDHELPNOWEV]

An update:

I still haven't run MemTest+86, but I have been operating in the normal configuration (not safe mode) for a couple of days now and I haven't really had any problems. The only problem I have had is now my printer isn't registering with my computer and I get that noise that the printer is connecting and disconnecting via usb from time to time. I tried to re-install the computer but then got a BSOD.

Once I do run it I'll have another update for you.

 

[Laith]

Okay sounds good.

 

[INEEDHELPNOWEV]

LAITH!

Finally ran MemTest86 and I got a "pass complete, no errors". I'm running it again because I'm skeptical.

So let's say I did the Malware and deleted all of that nonsense. I ran SeaTools and that turned out okay. And it looks like I'm about to pass this with flying colors. What's the next step?

-EV

 

[Laith]

Did you run MemTest86+? Also post a picture of the finishing screen of MemTes86+.