Help Windows 7 64bit clean install

[sforce1]

PC specs
AMD Phenom II 965 3.4 GHz
4 GIG RAM
1.5 tb hard drive

Hope someone can help. I am tring to install a OEM windows 7 pro 64 bit as a clean install it goes through all the setup and restarts several times but then after it restarts it gives me a screen that is [This Computer restarted unexpectedly or encountered an unexpected error Windows install cannot proceed restart computer to install] I have done this several times what could this be. I have read all the install messages and cannot seem to find how to fix this problem. Please any HELP out there??

 

[gregrocker]

Where did you get the ISO? Burn the DVD again using ImgBurn at 4x speed with Verify, or Verify the DVD.

Check if there is a more recent BIOS version update for your BIOS, on your maker's support downloads page.

Check also what the SATA controller setting is.

 

[sforce1]

Where did you get the ISO? Burn the DVD again using ImgBurn at 4x speed with Verify, or Verify the DVD.

Check if there is a more recent BIOS version update for your BIOS, on your maker's support downloads page.

Check also what the SATA controller setting is.

The Windows disk I purchased from FRY's for new Computer setup Windows 7 PRO OEM Software

I will Check on the BIOS

What should the SATA Controller setting be?

 

[bobkn]

What should the SATA Controller setting be?

The safest mode is IDE.

That said, Win7 included AHCI mode drivers for my controller (Intel X58 based motherboard).

I'm not sure that Microsoft would be so accomodating for an AMD chipset, though.

 

[sforce1]

Well I have tried everything that I can and still not working do not know what else to do if anybody can help please do.

THANKS

 

[theog]

Try with 2g of ram.

http://www.sevenforums.com/installation-setup/34853-common-installation-problems.html

http://www.sevenforums.com/installa...ck-reference-list-installing-windows-7-a.html

 

[sforce1]

Tried that no luck

 

[theog]

How far can you get in this tutorial:

http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html?ltr=C

Is this mobo?

http://www.biostar.com.tw/app/en/t-series/introduction.php?S_ID=395

 

[sforce1]

How far can you get in this tutorial:

http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html?ltr=C

Is this mobo?

BIOSTAR :: TA790GX A3+ :: Overview

Yes that is the mobo and as far as I got in the install is #9 after the restart it will give the message that there was a uxexpected restart or error reset will start the install again.I do not know what I am doing wrong so far I have spent about 30hrs trying to do this install I would like to get Windows 7 to work in 64bit since I have a good CPU it should handle it but not working yet.Any help you could give me would be great. THANKS

 

[theog]

Have try formating yuor HD at Step 8?

 

[sforce1]

Yes formated the new 1.5tb and on another try a 500gb still no luck.

 

[gregrocker]

Test your hardware: Download and burn to CD the DOS diagnostics from your HD maker and run full scan.

Run memtest86 overnight to stress test RAM.

Try another DVD drive, or try install from flash stick: http://www.sevenforums.com/tutorials/31541-windows-7-usb-dvd-download-tool.html?filter
Extract the ISO from DVD using ImgBurn.

 

[sforce1]

Yes formatted a 1.5tb and on another try a 500gb still no luck

 

[theog]

Test your hardware: Download and burn to CD the DOS diagnostics from your HD maker and run full scan.

Run memtest86 overnight to stress test RAM.

Try another DVD drive, or try install from flash stick: http://www.sevenforums.com/tutorials/31541-windows-7-usb-dvd-download-tool.html?filter
Extract the ISO from DVD using ImgBurn.

What speed did you burn your DVD at?

Where done download your ISO from?

 

[sforce1]

Test your hardware: Download and burn to CD the DOS diagnostics from your HD maker and run full scan.

Run memtest86 overnight to stress test RAM.

Try another DVD drive, or try install from flash stick: http://www.sevenforums.com/tutorials/31541-windows-7-usb-dvd-download-tool.html?filter
Extract the ISO from DVD using ImgBurn.

What speed did you burn your DVD at?

Where done download your ISO from?

The DVD is the OEM 64bit that I purchased from Fry's when I got the rest of the parts of the PC. I was going to buy a new DVD is there one that you would suggest that is working with windowsw 7.Thanks for all the help.

 

[gregrocker]

You can first try extracting the ISO files to the desktop, then running Setup. Use PowerISO free trial.