Solved Help with this bsod

[itekweni]

Good afternoon I have only just upgraded from win7 home 32bit to home 64 bit and have already had a BSOD which is a little worrying as its a clean install I have included a zip file made from running DM log collector hope it helps in seeing what the problem might be...thanks in advance

 

[HarriePateman]

Hello, Found this;

Service Name:  nvlddmkm
Service File Name:  system32\DRIVERS\nvlddmkm.sys
Service Type:  kernel mode driver
Service Start Type:  demand start
Service Account:  

Event[698]:
  Log Name: System
  Source: Microsoft-Windows-UserPnp
  Date: 2014-03-13T18:57:24.879
  Event ID: 20003
  Task: N/A
  Level: Information
  Opcode: Info
  Keyword: N/A
  User: S-1-5-18
  User Name: NT AUTHORITY\SYSTEM
  Computer: The-Beast
  Description: 
Driver Management has concluded the process to add Service nvlddmkm for Device Instance ID PCI\VEN_10DE&DEV_1200&SUBSYS_15633842&REV_A1\4&2D68EC9A&0&0008 with the following status: 0.

Update your GFX Drivers. Remember to delete the old ones!

 

[Thedoctor44]

I disagree, the BSOD is a clock watchdog timeout which generally indicates the processor hangs and cannot perform interrupt requests.

Well overclocking isn't your issue because you're only 9MHz higher than what you should be.

CPUID:        "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
MaxSpeed:     3300
[COLOR="Blue"]CurrentSpeed: 3309[/COLOR]

Hmm, I'll look into it more tomorrow.

 

[itekweni]

Hi Thedoctor44 thanks for the update and the cpuid you looking at my MB was bought as an overclocked bundle which was configured by the supplier hope this helps

 

[Thedoctor44]

Can you run prime95 and post the results, including temperature. Please follow these instructions.

www.sevenforums.com/tutorials/100352-hardware-stress-test-prime95.html

 

[itekweni]

Hi Thedoctor44 I am trying to run the suggested application but so far my pc hangs but I am not going to give up and will try get the results you need

 

[Thedoctor44]

Does your PC hang when running the test? If so does it only hang when running that particular test? If both answers are yes there is a strong indication that it is your CPU.

 

[itekweni]

Hi thedoctor44 sorry for delay in coming back to you. I have run tests and if my pc is in overclocked state then it fails test and if I reset it to standard in bios it runs the test and I stop it after an hour as it passes all...as I said in an earlier post this board was overclocked by the supplier and I am speaking to them as the system is still in warranty

 

[Thedoctor44]

I think you may have solved your problem. Your manufacturer might have overclocked the PC too much.