Help

Dj Gudda

New member
Member
Local time
8:42 AM
Messages
30
When my system boots the display is left justified so much so that if i run a boot command e.g Alt+F10 i can't see the first part of the boot choices the display is way to the left but when W7 starts there is no problem how can i get my display centred when it boots?
I have a SAMSUNG LD190 my display adapter is G45/G43 Express Chipset
 

My Computer

OS
Windows 7 x64
When you first start, Windows is not loaded and the Windows driver for the video is not loaded. The video defaults to a basic "VGA mode". If you restart the PC (not a cold boot) is the display OK? The display is only showing what it's getting from the Video.

If you haven't done it, try updating the Intel integrated video drivers and see if that helps. You could also check for an Intel chipset driver update and if there is one install that too.

The problem could even be BIOS related. Try resetting the BIOS and see if that helps. You didn't list the PC or the motherboard but on many just removing the BIOS backup battery for about 10 minutes will reset the BIOS.
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
My Own Build
OS
Windows 10 64 bit
CPU
Intel i7 6700K
Motherboard
ASUS ROG Maximus VIII Hero
Memory
16GB Corsair Dominator
Graphics Card(s)
Intel CPU Graphics
Sound Card
RealTek
Monitor(s) Displays
27" Dell S2719dgf
Screen Resolution
2560X1440
Hard Drives
1 TB Samsung 850 EVO SSD for Win 10 Pro
500GB Samsung 850 EVO SSD for Win 10 Insider
2 TB drive for backup
PSU
EVGA Supernova 750G2
Case
BeQuiet Silent Base 600
Cooling
Deepcool Captain 120EX
Keyboard
Microsoft Wireless 2000
Mouse
Microsoft wireless
Internet Speed
100 MB/sec (Cable)
Antivirus
Microsoft Defender and Malwarebytes
Browser
Edge/Firefox
Other Info
Cakewalk (Sonar) by BandLab and Studio One 4.1 Pro recording studio software. MOTU 896Mk3 Hybrid recording interface, Frontier Tranzport wireless control unit, Behringer X-Touch Control Surface.
Five USB connected optical drives for CD Audio production using Nero BurningROM
Make sure you have the latest BIOS update for your model computer.

Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS

If prob persists, check the settings in BIOS setup to see if changing one can remedy it. Be careful changing settings; note which one was changed so you can change it back if necessary. Ask back here if you have any questions.
 
Have you checked the menu on your monitor and used the size or position controls to adjust it?

What type of connector are you using for the monitor?
 

My Computer

Computer Manufacturer/Model Number
Homebuilt
OS
Windows 7 x64
CPU
i7-2600K
Motherboard
Asus P8Z77-v Pro
Memory
8 G
Graphics Card(s)
GTX 480
Sound Card
Onboard
Monitor(s) Displays
LG W2753V
Screen Resolution
1920x1080
Hard Drives
Crucial M4 128 G SSD
using VGA can only access monitor menu in Windows not during boot only can use Auto Adjust but it only moves about a millimeter to the right, i checked n saw that I have
Total Available Video Memory : 1695MB
Dedicated Video Memory: 64MB
System Video Memory: 0MB
Shared Video Memory: 1631MB
Wud the fact that i have 0MB for system video memory have anything to do with it n if so what do i do?
 

My Computer

OS
Windows 7 x64
Back
Top