how to find drivers for toshiba hard drive using usb 3.0?

[ProMaz]

in my previous post i have been recommended to use Best Free Windows 10/8/7/Vista/XP Backup Software 2018 | AOMEI Backupper Standard
to make a image of my drive and create a bootable media if my windows wouldnt boot after having a problem with the upgrade
now the question is some people have had problems with their drivers because windows pe normally doesn't run the drivers for usb 3.0 until start up to fix this while using aomei you could add the drivers that you will need .inf files but i haven't been able to locate my hdd drivers
using the devices tab on control panel and through the properties of my external hdd i have found
<a href="https://ibb.co/1sjgMw9"><img src="https://i.ibb.co/6vLM8f4/driverdetailspng.png" alt="driverdetailspng" border="0"></a><br /><a target='_blank' href='https://imgbb.com/'>upload photo to forum</a><br />
driverdetailspng — ImgBB

turns out there is other drivers and one is for the hdd abover (i think) and on for the usb cord connecting the hdd (below)
usbdriverspng — ImgBB

am a bit confused which one would i not have while in windows pe?

these files dont work with aomei as it needs .inf files
how do i get the .inf files of my hdd so i could upload them with the bootable media?

 

[ProMaz]

i was thinking because i could already use my hdd 3.0 on my computer then the driver is already there is there a way to find it or is there a way to load all my drivers on create bootable media?

 

[ProMaz]

i also dont have any usb 3.0 ports on my computer though my hdd works so i think its backward compatible if that helps

https://www.laptopoutlet.co.uk/tosh...0-portable-external-hard-drive-hard-disk.html

i think this is the one

 

[SIW2]

either:

1. You have installed usb3 drivers in your current operating system


OR

2. You have not installed usb3 drivers and win7 is treating the usb3 port ( if there is one) as if it were usb2.

Your second photo shows win7 standard usb2 driver.

What make and model is your laptop

- or if you have a pc

what make and model is the motherboard?

It would help if you fill out your system specs

 

[ProMaz]

Toshiba V63700 C 1tb Driver Download

i think this is the driver because it has the same v**** as mine but is this all i need to put into the bootable media or is there something else? and lets hope it actually has .inf files

 

[ProMaz]

either:

1. You have installed usb3 drivers in your current operating system


OR

2. You have not installed usb3 drivers and win7 is treating the usb3 port ( if there is one) as if it were usb2.

Your second photo shows win7 standard usb2 driver.

What make and model is your laptop

- or if you have a pc

what make and model is the motherboard?

It would help if you fill out your system specs

my computer is hp pavilion slimline and these are the specs
cpuz — ImgBB

 

[SIW2]

That is not much use. there are many "hp pavilion slimlines" 3507, 5704 and many many more. They are not the same machines.

The words stone, blood and getting spring to mind.

It is a socket 775 machine so probably does not have usb 3 support on the mobo. Though there could be a usb3 add on card in it.

 

[ProMaz]

That is not much use. there are many "hp pavilion slimlines" 3507, 5704 and many many more. They are not the same machines.

The words stone, blood and getting spring to mind.

It is a socket 775 machine so probably does not have usb 3 support on the mobo. Though there could be a usb3 add on card in it.

Its hp pavilion slimeline s5000 series on the sticker though on the hp site and using there program they call it s5600
thats why i didnt say it i was confused thanks for putting up with me though

also my hdd is plug and play if that helps

this is the manual: https://www.toshiba-storage.com/wp-content/uploads/2018/02/UM_Stor_e_Basics.pdf

 

[SIW2]

Just assume you don't have usb3 on that machine. If you had added a pcie to usb3 card, you would know.

Shouldn't need to add any drivers to boot media for usb2

 

[ProMaz]

Just assume you don't have usb3 on that machine. If you had added a pcie to usb3 card, you would know.

Shouldn't need to add any drivers to boot media for usb2

which means it will act like a 2.0 with no problem because i dont have 3.0 ports on my machine (sure of that0
thanks a lot and am sorry again for being not that tech savvy