I need help !

[zungul]

Hi,

I have big problem. Without any reason I've got this Blue screen message:

I made dskchk /f /r
virus check
memtest
hd check Seatools for Dos
sfc /scannow
and everythimg is ok.
I need some advice what can be my problem and how fix it, because I'm completely lost.
P.S.
I'm not able to boot to the Windows because when I start computer I'm getting this Blue Screen.

 

[axe0]

http://www.sevenforums.com/bsod-help-support/96879-blue-screen-death-bsod-posting-instructions.html

http://www.sevenforums.com/crash-lockup-debug-how/374763-troubleshooting-stop-0x7b-stop-0xed.html

 

[zungul]

I did this using MessyBoot 5.0 and I'm not sure if this report is what you need but like I said before I cannot get normal way into my Windows 7

 

[axe0]

Boot into the BIOS/boot options, what are the boot options and in what order are they?

When you're back in Windows you need to update your installation!

OS Version:                6.1.7600 N/A Build 7600
Hotfix(s):                 N/A

Als run following when you're back.

Please post the report of Windows Genuine and Activation Issue Posting Instruction

 

[zungul]

Hi,

I changed in Bios "Sata AHCI Mode" to IDE and I tried to boot pressing F8 and choossing "Last KnowGood Configuration" and it worked.
But, still I don't understand why I had to change it.:banghead:

 

[axe0]

I never said anything about changing the boot mode, I only asked what the boot options are and in what order they are.

 

[zungul]

What do you mean boot options?

P.S.
IDE Channel 0 Master is my CDROM
IDE Channel 0 Slave is None
IDE Channel 1 Master is my HD with OS
IDE Channel 1 Slave is my second HD
=========
First Boot CDROM
Second Boot Hard Drive
Third USB

 

[axe0]

Do you still get a crash if you change the boot order like
1. hard drive
2. cd rom
3. USB

 

[zungul]

If I come back to Sata AHCI Mode is not working but if there is IDE everything is working. Why is it like that?

 

[axe0]

That is the boot mode you've installed Windows in, on some mainboards it gives problems when switching and others don't (why I don't know)

 

[zungul]

But my computer was working before this Blue Screen message with Sata AHCI Mode.
I'm not sure if this setup was from the beginning or it was setup later.

 

[axe0]

Are you running a beta version of the BIOS?
Your BIOS version is not listed in the updates of Gigabyte.

 

[zungul]

My BIOS Version is EP45-DS3L F11c

 

[axe0]

Version F11c isn't listed on the support page which is why I asked if it is a beta version or something.
View attachment 383452

 

[zungul]

I noticed this. Some time ago I was looking to update my BIOS and somewhere I found this one (EP45-DS3L F11c) for my motherboard.
Now I checked and nowhere I can find this version. Do you think that I supposed to downgrade my BIOS to F11b version?

 

[axe0]

I never recommend a beta version, unless you are willing to test it and get more problems.

 

[zungul]

It means I supposed to downgrade it, but BIOS v,F11b is a Beta too.
It means you advice to downgrade to versiom F10?

 

[axe0]

Yes, although it might not be compatible with Windows 7, release date Windows 7 = 2009, release date BIOS F10 = 2008.

 

[zungul]

Than,what I supposed to do?

 

[axe0]

How old is your system?