I need HELP!!!!!!!

[win7clutz]

When ever i do a memory test I get a hardware error but it never tells me what it is on the reboot

Then your dump files are really irrelevant... Fix the hardware (try new mem)...

 

[dmcouch1975]

try this

see if that worked

 

[dmcouch1975]

here are the rest

this is all my current dump files after reloading windows 7 yesterday

 

[Tews]

All of your .dmp files point to memory corruption in one form or the other... with the prices of ram as cheap as they are, I would replace them with matching sticks .... Hope this helps..

 

[Dom]

Some of your files lead to an IRQ_NOT_LESS_OR_EQUAl error. There are two main causes -
Corrupt RAM
Overheating (Which could also be the RAM overheating as well)
Run the memtest as mentioned before by pebbly, see if anything happens.
If not, download this and this (two separate links)
Now, run Intel burn test, and while its testing, open up RealTemp to see some CPU temperatures.
Tell us if Intel burn test says you fail, or if the temps on Realtemp goes 60-70+.

 

[pebbly]

are you overclocking? if so reset to defaults , run sfc /scannow as lil dom says heat can cause errors ,have you adequate cooling?

 

[pebbly]

another thing to try, check you have no shorts on the mobo ,if at all possible build the parts outside of the case and see if you still get errors ,try running with 1 stick of ram, recheck all mobo connecters

 

[Dragonfly]

I had a stick of Corsair XMS go bad on me after a year of flawless performance. Discovered the problem by running MemTest. Try each stick by itself and see if you can isolate the problem.

Corsair has a lifetime warranty and replaced both my sticks with a new matched pair. Problem solved.

 

[dmcouch1975]

Overclocking

I am not overclocking and I am running optimized defaults in my bios settings cause my fail safe defaults will not run. I have however changed 4 things in my bios settings and that is usb support for my mouse and keyboard and changed full screen logo to off and changed my memory voltage to 2.1 from auto. How and what is sfc/scannow

 

[whs]

SFC / SCANNOW is the System File Checker checking whether any of your system files are corrupted. If it can, it will repair them. If not, it tells you in the CBS.log which ones are corrupted. When it comes to that, post back and I tell you haow to make sense of it.
You have to run this command in an elevated Command Prompt - cmd (run as administrator). You find it in All Programs > Accessories. Right click on it and "run as admin". The correct syntax for the command is sfc /scannnow - notice the blank in front of the slash.
PS: Did you ever change your Dimms around? Maybe you want to try with just one or 2 Dimms and in different slots. Many people suggested you have a memory problem.

 

[pebbly]

dmcouch did you have probs when the ram voltage was set to auto?

 

[dmcouch1975]

Tests

I fail the INTEL test and my temp are in the high 50 and like 60, 61

 

[pebbly]

what intel test are you failing?

 

[pebbly]

right dmcouch, lets get radical strip the pc down to the bare essentials just 1 stick of ram ,keyboard,mouse and graphics card and see what results you get try both sticks of ram seperately then we will take it from there

 

[dmcouch1975]

Intel Test

Intel Burn test version 2.4 Passed with 1 stick of ram going to try now the other two sticks that were not in computer since I know the one I pulled out was bad.

 

[whs]

Looks like you are approaching it systematically - very good.

 

[dmcouch1975]

Motherboard

I must have a bad mother board cause the other 2 sticks say they are bad too that is not possible to have 3 bad stick of RAM is it

 

[dmcouch1975]

errors

I am still getting errors with just one stick here is the latest dump file

 

[win7clutz]

I know its pain in the A$$ but if I was you I’d bench build to get to the end of this…

Pull everything out of the case. On a workbench/table hook up MB, PS, Memory (1 stick only), Video card, and a Optical drive…

Boot to a memetest CD and test, go for 5 successful passes and then retest with a different memstick. Then test stick #3 the same way.

The odds that 3 sticks of Corsair being bad is extremely unlikely. If all three fail, I’d replace the board…

 

[dmcouch1975]

System

ALL I HAVE hooked up to computer now is motherboard video card 1 samsung DVD-R, Keyboard and mouse and Hard drive that is it nothing else and no extra programs except AVG 9.0 Internet security and 1 stick of RAM. If I put anymore memory in there the computer will now boot up.