I want to uninstall AMD VISION Engine Control Center

[Il Gerry]

Hello everyone : Festa:
I have a AMD Radeon HD 6650M and I want to uninstall AMD VISION Engine Control Center because I do not find the procedure and I think that is right for my card video.Grazie Friends: D

 

[Terronium 12]

I'm not sure I understand.

Why do you want to uninstall it, exactly? I'm fairly sure the VE suite includes the Catalyst drivers.

 

[Il Gerry]

Hello so it should not create "conflicts" with Windows? I thought he was the one that causes me Bluescreen!Oh because they are inexperienced abbastranza video card I wanted to know what should I set the voltage settings of CPU power I have 1200 Mhz and 1800Mhz but I did not want to overclock the card and also because the notebook are new.
Meanwhile, thanks
Hello.

 

[Terronium 12]

dxgmms1.sys, as seen in your BSOD, is most certainly related to your video card's drivers. If you haven't already, try updating them and see if that resolves the issue. If you're overclocking, stop.

An alternative problem that's causing this specific stop screen is your RAM. To find out if it is run the built-in memory diagnostic tool; learn how to do so here.

Run it for several hours, preferably overnight and report back.

 

[Il Gerry]

I ran the Memtest86 + to 3 times more planted! So the first time with the CD stops after 7%
the second well at 20%, again with the boot cd.
So to test I tried to throw it into the USB but it seemed to go almost 65% but then it always restarts ... Uff!
Now I'm annoyed by how concave Oh I forgot ... I also run an advanced boot configuration with Last valida.Il PC seems to go but the fear is just around the corner. Help me please

 

[Terronium 12]

The language barrier is really getting the best of me here, but I think I understand the gist (basic outline) of what you're saying; have you altered any settings in the BIOS? If you have revert them back to default and try again.

Two questions though:

1. Is this a laptop or desktop?
2. Do you see any errors before it restarts?

If the problem persists even with the factory defaults (assuming they aren't already) then you may have a bad RAM stick, or two.

 

[Dave76]

Did memtest86+ show any errors?
Usually when memtest86+ stops it is due to massive errors.
It will run different tests, is that what is happening?

When it throws errors it looks like this:

 

[Britton30]

I suggest you follow the advice zigzag is giving you in your other thread: http://www.sevenforums.com/crashes-debugging/205441-blu-screen-vista-help-me.html
Unless that is a different PC than the one you are working on here, Uninstall your video drivers and reboot, Windows should reinstall it for you. The dxgmms1.sys in the blue screen is from a DirectX driver.

@Terronium, this is a laptop.

 

[Il Gerry]

dxgmms1.sys, as seen in your BSOD, is most certainly related to your video card's drivers. If you haven't already, try updating them and see if that resolves the issue. If you're overclocking, stop.

An alternative problem that's causing this specific stop screen is your RAM. To find out if it is run the built-in memory diagnostic tool; learn how to do so here.

Run it for several hours, preferably overnight and report back.

Sorry but with AMD's Engine Center as if I understand overclocking with this (photo) because I have not figured out how to use it!

 

[Il Gerry]

this

 

[Il Gerry]

Did memtest86+ show any errors?
Usually when memtest86+ stops it is due to massive errors.
It will run different tests, is that what is happening?

When it throws errors it looks like this:
View attachment 191441

Excuse : O the mess but I am new to this "so cool" forum ..
The PC is an Acer with the same Windows 7 HP AMD Phenom II X3 N830 with 4GB of RAM DDR3-Hdd750gb and video card Radeon HD 6650M (laptop 15.6 ") and I have basically tried to make the first Memtest86 + from the CD and up to 7% then restarts so also the second time .
The third I started from USB stick result comes about 40% then restarts.
Not like the photo above, just restarts and then it seems that everything funziona.Ora do not know but other than that there a little program that allows me to remove old drivers or I resign to change RAM : Mad:

 

[Il Gerry]

I suggest you follow the advice zigzag is giving you in your other thread: http://www.sevenforums.com/crashes-debugging/205441-blu-screen-vista-help-me.html
Unless that is a different PC than the one you are working on here, Uninstall your video drivers and reboot, Windows should reinstall it for you. The dxgmms1.sys in the blue screen is from a DirectX driver.

@Terronium, this is a laptop.

Thanks and sorry for the mess I made with the post ..
I answer as already written in the first post, I solved by changing RAM and saw that I had "only" I have installed 4GB 8GB (capacity as recommended by Acer)
hopefully now everything seems to work well ...
So I close by thanking you again for the help key that I found here.
Hello to everyone. : Festa:: Thumbsup:

 

[Solarstarshines]

I suggest you follow the advice zigzag is giving you in your other thread: http://www.sevenforums.com/crashes-debugging/205441-blu-screen-vista-help-me.html
Unless that is a different PC than the one you are working on here, Uninstall your video drivers and reboot, Windows should reinstall it for you. The dxgmms1.sys in the blue screen is from a DirectX driver.

@Terronium, this is a laptop.

Thanks and sorry for the mess I made with the post ..
I answer as already written in the first post, I solved by changing RAM and saw that I had "only" I have installed 4GB 8GB (capacity as recommended by Acer)
hopefully now everything seems to work well ...
So I close by thanking you again for the help key that I found here.
Hello to everyone. : Festa:: Thumbsup:

Just some friendly advice ,You should try reading what your Laptop can exactly do The ccc is not a real OC tool persay espcially for CPU's

If you are not familliar with the sequences of using the CCC i suggest reading some forum tutoritals on Video cards /Ram /Cpu These Pc Bibles will help you out big time if you take the time to read

Ps unistalling the CCC for what you did by adjusting speeds would have just made your matter worse good thing you came here before it really got out of hand

One more note you can always go back to default settings through Bios which should reset everything to factory standards

 

[Il Gerry]

Hello
In fact, since I am a bit of a "messy" I preferred not to "venture" into strange changes (BIOS, CCC, etc. ..) now I have only extended the Ram as Acer, declares that nothing can hold 8gb just!
Problem solved.. I think.