Im going nuts... ;(

N

nexexcalibur

New member
Member
Local time
5:44 AM
Messages
43
i had windows 7 x64 build 7100, and it was THE best system i ever had...
yesterday i upgraded it to RTM...and then the problems started...

in first everything was nice...but then, while i was playing TF2,windows crashed...and only thing i could do is restart...

today same thing happened,but this restart was fatal...bios was ****** up,resolution changed to 800x600...performance was awful....

then i formated first partition and "clean" installed win 7...

and 5 minutes ago,same tipe of "crash" with fast sound looping happened...and before that one BSOD...

i installed as much drivers as i could remember from win RC configuration...

also on that RC conf. i had overclocked processor and memory (proc. from 2,7 to 3ghz and memory from 400mhz to 533mhz)

i dont know what to do to make it more stable...feel like its going to crash every moment...
sry for "bad" english...
 

My Computer

OS
Windows 7 x64 (build 7600)
CPU
AMD +7750
Motherboard
Biostar TA790GXB A2+
Memory
Kingston HyperX 4GB 1066Mhz
Graphics Card(s)
Palit Gts250 1gb
Sound Card
realtek
Monitor(s) Displays
Samsung T220
Screen Resolution
1680x1050
Hard Drives
WD640aaks
PSU
550w
Case
LC-POWER 914b
Cooling
CM TX2 with TX3 fan
Keyboard
logitech ex100
Mouse
a4 tech x7
Internet Speed
10mbit

My Computer

Computer Manufacturer/Model Number
self built
OS
7600.20510 x86
CPU
P4 550 3.4 GHz HT running at 3.5 GHz
Motherboard
MSI PM8M3-V (MS-7211 v1.x) Micro-ATX mainboard
Memory
OCZ 2 GB(2x1GB) DDR400mHz running @ 414 mHz
Graphics Card(s)
HIS Radeon HD 3850 IceQ 3 Turbo HDMI Dual DL-DVI AGP
Sound Card
MOTU Traveler firewire studio interface 192 kHz 24 bit
Monitor(s) Displays
22" widescreen Acer X223W LCD, 17" Compaq P75 CRT
Screen Resolution
1680x1050 and 1280x1024
Hard Drives
SATA I x2 WD, 400 GB and 120 GB, SATA 2 WD Caviar Black 1 TB
PSU
350W generic
Case
Cybertronpc, it glows blue
Cooling
stock cpu fan, Ice-Q 3 gpu and system, many case fans
Keyboard
Logitch Classical Keyboard 200
Mouse
Logitech Mediaplay cordless
Internet Speed
1792/448 kbits/sec
Other Info
SATA II PCI fake RAID adapter, 1 GB Readyboost, original ATI Remote Wonder (even works with WMC perfectly), Logitech Rumblepad 2 game controller x2

My Computer

OS
Windows 7 x64 (build 7600)
CPU
AMD +7750
Motherboard
Biostar TA790GXB A2+
Memory
Kingston HyperX 4GB 1066Mhz
Graphics Card(s)
Palit Gts250 1gb
Sound Card
realtek
Monitor(s) Displays
Samsung T220
Screen Resolution
1680x1050
Hard Drives
WD640aaks
PSU
550w
Case
LC-POWER 914b
Cooling
CM TX2 with TX3 fan
Keyboard
logitech ex100
Mouse
a4 tech x7
Internet Speed
10mbit
It's from a corrupt or incompatible driver. All your drivers look alright though.

Which antivirus are you running?
 

My Computer

Computer Manufacturer/Model Number
self built
OS
7600.20510 x86
CPU
P4 550 3.4 GHz HT running at 3.5 GHz
Motherboard
MSI PM8M3-V (MS-7211 v1.x) Micro-ATX mainboard
Memory
OCZ 2 GB(2x1GB) DDR400mHz running @ 414 mHz
Graphics Card(s)
HIS Radeon HD 3850 IceQ 3 Turbo HDMI Dual DL-DVI AGP
Sound Card
MOTU Traveler firewire studio interface 192 kHz 24 bit
Monitor(s) Displays
22" widescreen Acer X223W LCD, 17" Compaq P75 CRT
Screen Resolution
1680x1050 and 1280x1024
Hard Drives
SATA I x2 WD, 400 GB and 120 GB, SATA 2 WD Caviar Black 1 TB
PSU
350W generic
Case
Cybertronpc, it glows blue
Cooling
stock cpu fan, Ice-Q 3 gpu and system, many case fans
Keyboard
Logitch Classical Keyboard 200
Mouse
Logitech Mediaplay cordless
Internet Speed
1792/448 kbits/sec
Other Info
SATA II PCI fake RAID adapter, 1 GB Readyboost, original ATI Remote Wonder (even works with WMC perfectly), Logitech Rumblepad 2 game controller x2
torrentg said:
It's from a corrupt or incompatible driver. All your drivers look alright though.

Which antivirus are you running?
Click to expand...
avast home 4.8...maybe its from some software,i installed ton of it today...
 

My Computer

OS
Windows 7 x64 (build 7600)
CPU
AMD +7750
Motherboard
Biostar TA790GXB A2+
Memory
Kingston HyperX 4GB 1066Mhz
Graphics Card(s)
Palit Gts250 1gb
Sound Card
realtek
Monitor(s) Displays
Samsung T220
Screen Resolution
1680x1050
Hard Drives
WD640aaks
PSU
550w
Case
LC-POWER 914b
Cooling
CM TX2 with TX3 fan
Keyboard
logitech ex100
Mouse
a4 tech x7
Internet Speed
10mbit
I'd uninstall Avast and also disable Driver Verifier.

See how that does.

Google can't find anything on this driver: agn70r5u.SYS

That could be the issue right there. Try also, renaming that to agn70r5u.bak and rebooting.
 

My Computer

Computer Manufacturer/Model Number
self built
OS
7600.20510 x86
CPU
P4 550 3.4 GHz HT running at 3.5 GHz
Motherboard
MSI PM8M3-V (MS-7211 v1.x) Micro-ATX mainboard
Memory
OCZ 2 GB(2x1GB) DDR400mHz running @ 414 mHz
Graphics Card(s)
HIS Radeon HD 3850 IceQ 3 Turbo HDMI Dual DL-DVI AGP
Sound Card
MOTU Traveler firewire studio interface 192 kHz 24 bit
Monitor(s) Displays
22" widescreen Acer X223W LCD, 17" Compaq P75 CRT
Screen Resolution
1680x1050 and 1280x1024
Hard Drives
SATA I x2 WD, 400 GB and 120 GB, SATA 2 WD Caviar Black 1 TB
PSU
350W generic
Case
Cybertronpc, it glows blue
Cooling
stock cpu fan, Ice-Q 3 gpu and system, many case fans
Keyboard
Logitch Classical Keyboard 200
Mouse
Logitech Mediaplay cordless
Internet Speed
1792/448 kbits/sec
Other Info
SATA II PCI fake RAID adapter, 1 GB Readyboost, original ATI Remote Wonder (even works with WMC perfectly), Logitech Rumblepad 2 game controller x2
Maybe you toasted you RAM?
 

My Computer

Computer Manufacturer/Model Number
Toshiba L355D-7901
OS
Windows 7 X64
CPU
AMD Turion™ X2 Dual-Core Mobile Processor RM-72
Motherboard
AMD M780G chipset
Memory
4GB PC6400 DDR2 SDRAM
Graphics Card(s)
ATI Radeon™ 3100 Graphics
Sound Card
Realtek High Definition Audio
Monitor(s) Displays
17.0” diagonal widescreen TruBrite® TFT LCD
Screen Resolution
1440x900
Hard Drives
250GB (5400 RPM) Serial ATA
Mouse
Microsoft Bluetooth Notebook Mouse 5000

My Computer

OS
Windows 7 x64 (build 7600)
CPU
AMD +7750
Motherboard
Biostar TA790GXB A2+
Memory
Kingston HyperX 4GB 1066Mhz
Graphics Card(s)
Palit Gts250 1gb
Sound Card
realtek
Monitor(s) Displays
Samsung T220
Screen Resolution
1680x1050
Hard Drives
WD640aaks
PSU
550w
Case
LC-POWER 914b
Cooling
CM TX2 with TX3 fan
Keyboard
logitech ex100
Mouse
a4 tech x7
Internet Speed
10mbit
zone23 said:
Maybe you toasted you RAM?
Click to expand...
i havent touched voltage...even on RC i changed to 533mhz,but didnt touch voltage...and everything worked like-a-charm
 

My Computer

OS
Windows 7 x64 (build 7600)
CPU
AMD +7750
Motherboard
Biostar TA790GXB A2+
Memory
Kingston HyperX 4GB 1066Mhz
Graphics Card(s)
Palit Gts250 1gb
Sound Card
realtek
Monitor(s) Displays
Samsung T220
Screen Resolution
1680x1050
Hard Drives
WD640aaks
PSU
550w
Case
LC-POWER 914b
Cooling
CM TX2 with TX3 fan
Keyboard
logitech ex100
Mouse
a4 tech x7
Internet Speed
10mbit

My Computer

Computer Manufacturer/Model Number
self built
OS
7600.20510 x86
CPU
P4 550 3.4 GHz HT running at 3.5 GHz
Motherboard
MSI PM8M3-V (MS-7211 v1.x) Micro-ATX mainboard
Memory
OCZ 2 GB(2x1GB) DDR400mHz running @ 414 mHz
Graphics Card(s)
HIS Radeon HD 3850 IceQ 3 Turbo HDMI Dual DL-DVI AGP
Sound Card
MOTU Traveler firewire studio interface 192 kHz 24 bit
Monitor(s) Displays
22" widescreen Acer X223W LCD, 17" Compaq P75 CRT
Screen Resolution
1680x1050 and 1280x1024
Hard Drives
SATA I x2 WD, 400 GB and 120 GB, SATA 2 WD Caviar Black 1 TB
PSU
350W generic
Case
Cybertronpc, it glows blue
Cooling
stock cpu fan, Ice-Q 3 gpu and system, many case fans
Keyboard
Logitch Classical Keyboard 200
Mouse
Logitech Mediaplay cordless
Internet Speed
1792/448 kbits/sec
Other Info
SATA II PCI fake RAID adapter, 1 GB Readyboost, original ATI Remote Wonder (even works with WMC perfectly), Logitech Rumblepad 2 game controller x2
I uninstalled avast...and played a bit DiRT2,and it seems like the problems are solved...

but why was avast making problems? i had avast while using RC...
 

My Computer

OS
Windows 7 x64 (build 7600)
CPU
AMD +7750
Motherboard
Biostar TA790GXB A2+
Memory
Kingston HyperX 4GB 1066Mhz
Graphics Card(s)
Palit Gts250 1gb
Sound Card
realtek
Monitor(s) Displays
Samsung T220
Screen Resolution
1680x1050
Hard Drives
WD640aaks
PSU
550w
Case
LC-POWER 914b
Cooling
CM TX2 with TX3 fan
Keyboard
logitech ex100
Mouse
a4 tech x7
Internet Speed
10mbit
nexexcalibur said:
I uninstalled avast...and played a bit DiRT2,and it seems like the problems are solved...

but why was avast making problems? i had avast while using RC...
Click to expand...

You'd have to ask them about that.

You're welcome.
 

My Computer

Computer Manufacturer/Model Number
self built
OS
7600.20510 x86
CPU
P4 550 3.4 GHz HT running at 3.5 GHz
Motherboard
MSI PM8M3-V (MS-7211 v1.x) Micro-ATX mainboard
Memory
OCZ 2 GB(2x1GB) DDR400mHz running @ 414 mHz
Graphics Card(s)
HIS Radeon HD 3850 IceQ 3 Turbo HDMI Dual DL-DVI AGP
Sound Card
MOTU Traveler firewire studio interface 192 kHz 24 bit
Monitor(s) Displays
22" widescreen Acer X223W LCD, 17" Compaq P75 CRT
Screen Resolution
1680x1050 and 1280x1024
Hard Drives
SATA I x2 WD, 400 GB and 120 GB, SATA 2 WD Caviar Black 1 TB
PSU
350W generic
Case
Cybertronpc, it glows blue
Cooling
stock cpu fan, Ice-Q 3 gpu and system, many case fans
Keyboard
Logitch Classical Keyboard 200
Mouse
Logitech Mediaplay cordless
Internet Speed
1792/448 kbits/sec
Other Info
SATA II PCI fake RAID adapter, 1 GB Readyboost, original ATI Remote Wonder (even works with WMC perfectly), Logitech Rumblepad 2 game controller x2
:cry: again me...

this morning i had again total freezing(not BSOD,couldnt press ctrl+alt+del,only thing left is restart)
after restart,i heard roar of cooler three times(usually one time),black screen,windows doesnt start,one more restart...now its stuck in bios,and it says something,and after that "changing dram speeds to default",something like that...

ten minutes ago, i came from college,turn on computer,and 5 seconds after windows started,it freezed again...

so, my opinion is,that while i was upgrading from RC to RTM,something broke down within hardware part of the computer...im guessing RAM memory...so i took out one module out...i ll see if it going to freeze again...if does,ill switch memories again...after that, i dont know what to do...
 

My Computer

OS
Windows 7 x64 (build 7600)
CPU
AMD +7750
Motherboard
Biostar TA790GXB A2+
Memory
Kingston HyperX 4GB 1066Mhz
Graphics Card(s)
Palit Gts250 1gb
Sound Card
realtek
Monitor(s) Displays
Samsung T220
Screen Resolution
1680x1050
Hard Drives
WD640aaks
PSU
550w
Case
LC-POWER 914b
Cooling
CM TX2 with TX3 fan
Keyboard
logitech ex100
Mouse
a4 tech x7
Internet Speed
10mbit
new update:

i put 2nd modul in memory slot,loged on and left the room...

now i came back and first heard cooler roaring like its booting(but non-stop)
and i turned on monitor,nothing happened...and the green light glowed repeatedly(it was always on,all the time,but now was flashing)

earlier i did microsoft memory diagnostic tool for one and for both moduls...and no problems were shown...


guess windows 7 dont like 2 same memories...
 

My Computer

OS
Windows 7 x64 (build 7600)
CPU
AMD +7750
Motherboard
Biostar TA790GXB A2+
Memory
Kingston HyperX 4GB 1066Mhz
Graphics Card(s)
Palit Gts250 1gb
Sound Card
realtek
Monitor(s) Displays
Samsung T220
Screen Resolution
1680x1050
Hard Drives
WD640aaks
PSU
550w
Case
LC-POWER 914b
Cooling
CM TX2 with TX3 fan
Keyboard
logitech ex100
Mouse
a4 tech x7
Internet Speed
10mbit
i need to bump mine "old" thread,,,

i got BSOD again...dump file is in attachment... :) help
 

My Computer

OS
Windows 7 x64 (build 7600)
CPU
AMD +7750
Motherboard
Biostar TA790GXB A2+
Memory
Kingston HyperX 4GB 1066Mhz
Graphics Card(s)
Palit Gts250 1gb
Sound Card
realtek
Monitor(s) Displays
Samsung T220
Screen Resolution
1680x1050
Hard Drives
WD640aaks
PSU
550w
Case
LC-POWER 914b
Cooling
CM TX2 with TX3 fan
Keyboard
logitech ex100
Mouse
a4 tech x7
Internet Speed
10mbit
Your .dmp file points to a bad graphic card driver.... Remove your current Nvidia driver and check for a newer version...

View attachment 43683
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
LENOVO K450 @3.0GHZ
OS
64-bit Windows 8.1 Pro
CPU
Core(TM) i5 CPU 4330 Haswell @ 3.20GHz
Motherboard
LENOVO
Memory
12.00 GB
Graphics Card(s)
Intel(R) HD Graphics
Sound Card
Intel HD integtrated
Monitor(s) Displays
HP 25' ISP Monitor
Screen Resolution
1900/1020
Hard Drives
(1) ST1000DM003-1CH162 (2) Generic STORAGE DEVICE USB Device (3) Generic STORAGE DEVICE USB Device
Internet Speed
100mb down/10mb up
Tews said:
Your .dmp file points to a bad graphic card driver.... Remove your current Nvidia driver and check for a newer version...

View attachment 43683
Click to expand...
is it possible that i got that bsod cause an overheating? i was playing alot Team Fortress 2 today...and i usually get everyday freezing,which lasts for 10-15 seconds,and than back to normal...but today freeze lasted more,and immediatly bsod after that...
 

My Computer

OS
Windows 7 x64 (build 7600)
CPU
AMD +7750
Motherboard
Biostar TA790GXB A2+
Memory
Kingston HyperX 4GB 1066Mhz
Graphics Card(s)
Palit Gts250 1gb
Sound Card
realtek
Monitor(s) Displays
Samsung T220
Screen Resolution
1680x1050
Hard Drives
WD640aaks
PSU
550w
Case
LC-POWER 914b
Cooling
CM TX2 with TX3 fan
Keyboard
logitech ex100
Mouse
a4 tech x7
Internet Speed
10mbit
Yes... This could definitely be a heating problem... download gpuz and tell us what the temps are... make sure that you are getting adequate airflow inside your case.. This is the kind of information that we need before we start troubleshooting ok??
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
LENOVO K450 @3.0GHZ
OS
64-bit Windows 8.1 Pro
CPU
Core(TM) i5 CPU 4330 Haswell @ 3.20GHz
Motherboard
LENOVO
Memory
12.00 GB
Graphics Card(s)
Intel(R) HD Graphics
Sound Card
Intel HD integtrated
Monitor(s) Displays
HP 25' ISP Monitor
Screen Resolution
1900/1020
Hard Drives
(1) ST1000DM003-1CH162 (2) Generic STORAGE DEVICE USB Device (3) Generic STORAGE DEVICE USB Device
Internet Speed
100mb down/10mb up
nexexcalibur said:
i need to bump mine "old" thread,,,

i got BSOD again...dump file is in attachment... :) help
Click to expand...



As tews pointed out the video driver was the likely cause. You do how ever have several drivers that are ancient they need upgrading.

you should also run a system file check to verify and repair your system files to do that type cmd in search>right click and run as admin>sfc /scannow

Let us know the results

Hope this helps

Ken J+




Code: 
BIOS64.sys        fffff880`03be7000    fffff880`03bef000    0x00008000    0x3ee27f50    6/7/2003 7:12:00 PM                        
secdrv.SYS        fffff880`06ce5000    fffff880`06cf0000    0x0000b000    0x4508052e    9/13/2006 8:18:38 AM                        
amdide64.sys        fffff880`0118d000    fffff880`01194000    0x00007000    0x470ed078    10/11/2007 8:40:08 PM                        
LHidFilt.Sys        fffff880`034a6000    fffff880`034b9000    0x00013000    0x474e90ad    11/29/2007 5:13:01 AM                        
LMouFilt.Sys        fffff880`034c7000    fffff880`034da000    0x00013000    0x474e90b1    11/29/2007 5:13:05 AM
Code: 
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\K\Desktop\122509-14320-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: 
Windows 7 Kernel Version 7600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
[B]Built by: 7600.16385.amd64fre.win7_rtm.090713-1255[/B]
Machine Name:
Kernel base = 0xfffff800`02c67000 PsLoadedModuleList = 0xfffff800`02ea4e50
Debug session time: Fri Dec 25 17:14:44.595 2009 (GMT-5)
System Uptime: 0 days 9:37:14.390
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
.......
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 101, {61, 0, fffff880009e9180, 1}[B]

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )[/B] 

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000061, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff880009e9180, The PRCB address of the hung processor.
Arg4: 0000000000000001, 0.

Debugging Details:
------------------


BUGCHECK_STR:  CLOCK_WATCHDOG_TIMEOUT_2_PROC

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

PROCESS_NAME:  svchost.exe

CURRENT_IRQL:  d

STACK_TEXT:  
fffff880`0a42c478 fffff800`02c85443 : 00000000`00000101 00000000`00000061 00000000`00000000 fffff880`009e9180 : nt!KeBugCheckEx
fffff880`0a42c480 fffff800`02ce15f7 : 00000000`00000000 fffff800`00000001 00000000`00002710 fffff880`13f1f679 : nt! ?? ::FNODOBFM::`string'+0x4e3e
fffff880`0a42c510 fffff800`02c28895 : fffff800`02c4d460 fffff880`0a42c6c0 fffff800`02c4d460 00000000`00000000 : nt!KeUpdateSystemTime+0x377
fffff880`0a42c610 fffff800`02cd53f3 : fffff800`02e51e80 00000000`00000001 fffffa80`047f9840 fffff800`02cd4b07 : hal!HalpHpetClockInterrupt+0x8d
fffff880`0a42c640 fffff800`02c982c9 : fffffa80`047f9a80 fffff800`02cdee52 fffffa80`047f9a80 fffffa80`04858440 : nt!KiInterruptDispatchNoLock+0x163
fffff880`0a42c7d0 fffff800`02fd3e58 : 00000000`00000000 fffff880`0a42cca0 fffff800`02c67000 00000000`00000011 : nt!KeFlushProcessWriteBuffers+0x65
fffff880`0a42c840 fffff800`02fd4e49 : 00000000`03e68c90 fffff800`02fd09ee 00000000`00000000 00000000`00000040 : nt!ExpQuerySystemInformation+0x1368
fffff880`0a42cbe0 fffff800`02cd8153 : fffffa80`04690000 000007fe`fa830be0 ffffffff`fffe7960 000007fe`00000000 : nt!NtQuerySystemInformation+0x4d
fffff880`0a42cc20 00000000`76f4021a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`0179f738 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76f4021a


STACK_COMMAND:  kb

SYMBOL_NAME:  ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: Unknown_Module

IMAGE_NAME:  Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

BUCKET_ID:  X64_CLOCK_WATCHDOG_TIMEOUT_2_PROC_ANALYSIS_INCONCLUSIVE

Followup: MachineOwner
---------
 
Last edited:

My Computer

Computer Manufacturer/Model Number
HP Pavillion dv-7 1005 Tx
OS
Win 8 Release candidate 8400
CPU
[email protected]
Memory
4 gigs
Graphics Card(s)
Nvidia 9600M
Sound Card
HD built-in
Monitor(s) Displays
17" Wxga
Screen Resolution
1440x900
Cooling
none
Internet Speed
45Mb down 5Mb up
You must log in or register to reply here.
Back
Top