Solved IRQL BSOD problems

[ivan495]

Guys, please help me.
BSOD started to happen few days ago. I think i upgraded BIOS and maybe installed some software on PC.
After that, i get BSOD while playing games or extracting large .rar files.

I runned memtest86+ for 3-4 hours and there were no errors. I even reinstalled GPU drivers but nothing helps.

I mostly get that irql_not_less_or_equal error.

My PC:

Phenom II X2 550BE @X3
Vtx 3d 5670 512mb DDR5
4GB DDR2
Asrock A790GXH/128M

Sorry for my bad English.

 

[Arc]

Welcome aboard.

► First of all, stpd.sys. SCSI Pass Through Direct DVD Drive Emaluator.

fffff880`02f8b4b8  fffff880`011062c6Unable to load image \SystemRoot\System32\Drivers\sptd.sys, Win32 error 0n2
*** [COLOR=Red]WARNING: Unable to verify timestamp for sptd.sys
*** ERROR: Module load completed but symbols could not be loaded for sptd.sys
 sptd+0x432c6[/COLOR]

It is used by Daemon Tools, Alcohol 120%, Active ISO Burner etc a few programs. Identify it and uninstall the program, 50% 0f your issues are solved.

► Next Ralink RT2561 RT2661 series Wireless LAN Card

fffff880`02f8a328  fffff880`0402db28Unable to load image \SystemRoot\system32\DRIVERS\netr6164.sys, Win32 error 0n2
*** [COLOR=Red]WARNING: Unable to verify timestamp for netr6164.sys
*** ERROR: Module load completed but symbols could not be loaded for netr6164.sys
 netr6164+0x9b28[/COLOR]

Update it from Ralink-A MEDIATEK COMPANY

► ATI Display Driver

fffff880`02f8ad68  fffff880`09aa2fd0Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** [COLOR=Red]WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
 atikmdag+0x235fd0[/COLOR]

Uninstall it using Driver fusion and reinstall it again, take the latest one.

► Audio Driver.

fffff880`02f8b958  fffff880`051d27a8 [COLOR=Red]HDAudBus[/COLOR]!HDABusWmiLogETW+0x248

Same as display driver. Uninstall, and reinstall the latest one from AMD.

► You need to run Disc Check.

1. Reseat the sata and power.
2. Run chkdsk /f/r, following the option two of the tutorial Disk Check
3. Seatool for dos: SeaTools | Seagate download
   Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests", then select "Long Test" and let it run.
4. If you use a SSD, update the firmware.

► Free up the startup.

1. Click on the Start button
2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
3. Select the “Startup” tab.
4. Deselect all items other than the antivirus.
5. Apply > OK
6. Accept the restart.

► Uninstall the following programs:

• AMD VISION Engine Control Center
• HD Tune Pro

Let us know the result.

 

[ivan495]

Thank you for your help.

I uinstalled these Daemon Tools and other image burning/mounting programs. I reinstalled my GPU and other drivers and i tested RAM with memtest86 for about 8 hours just to be sure.

I still get some different BSOD. I think thats because Windows. I think i will just format and reinstall wWindows 7 and move important files to other partition.

 

[Arc]

Ivan, better you upload those new dumps here first.

 

[ivan495]

Here. I dont know what to do. I reinstalled my drivers couple of times.

GPU drivers were first uinstalled in Add/Remove and then i went to safe mode and deleted them again with Driver Sweeper.
They are newest non-beta 12.8 drivers.

I even did this:
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

It showed that some Windows files are corrupted.

Here is my new dump. I deleted some older that you already seen.

 

[Arc]

Ivan, one question... when did you you last updated your Display driver (earlier that I suggested it the other day)?

And, Was the situation the same before that update?

 

[ivan495]

I reinstalled my Graphics Card driver yesterday and even couple of times before that. Uinstall in normaln ,and cleaned with Driver Sweeper in Safe Mod.

Maybe i should try newest beta drivers or some older. An old this BSOD-s started after i updated my BIOS from 1.60 to 1.70. Everything worked fine before that.

 

[Arc]

I reinstalled my Graphics Card driver yesterday and even couple of times before that. Uinstall in normaln ,and cleaned with Driver Sweeper in Safe Mod.

Maybe i should try newest beta drivers or some older. An old this BSOD-s started after i updated my BIOS from 1.60 to 1.70. Everything worked fine before that.

You are absolutely right. Shift the display driver to newer or older, hope one will work there.

Also reseat the card in the PCIe slot, sometimes such a thing works.

At last, you may think for a clean install.

 

[ivan495]

I think i will go with fresh windows install. After that, i need install MBO/Chipset driver again?

And one more question. Did you see theese new dumps? Are they caused by some softwere or?

Thank you for your help.

 

[Arc]

For reinstalling, follow http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html to get the best results. It works for retail as well.

All your latest crashes of this day are caused by the display driver, and nothing else. In every dump, there are multiple instances of the display driver failure.

 

[ivan495]

Tried to put latest AMD GPU beta drivers but i get the same thing.

I even got "PAGE_FAULT_IN_NONPAGED_AREA". That is strange because i googled it and in most cases, it has to do with RAM memory.

Then i got some "USBPORT.SYS" and same "ataport.SYS and atikmdag.sys" all combined with "ntoskrnl.exe"

I think i should go with fresh windows install and again search and install driver by driver.

 

[Arc]

I think i should go with fresh windows install and again search and install driver by driver.

Good idea, I must to say

 

[ivan495]

I have 2 partition. One partition = C Local Disk is for Windows and second is only for installed games/downloaded movies/music.
Do i need to format both drives or i can just format C: and reinstall windows?

 

[ivan495]

Did clean windows install but i still got BSOD.
Here is my DUMP file.

 

[Arc]

Ivan, in your clean install, you installed some craps. Uninstall there.

• AMD VISION Engine Control Center
• ASRock Utility
• Avira ; replace by Microsoft Security Essentials - Free Antivirus for Windows
• DAEMON Tools Lite

Then, update Linksys Wireless-G PCI Adapter from Linksys WMP54G. That one you installed is of 2009, and it is failing constantly. That is one of the main causes of the crashes.

Change the version of AMD display driver, too. What I am seeing is that the July version is crash prone. Change it any later version/beta, or to an earlier version. This is also crashing your system.

Donl let uTorrent autostart with windows. That is also a cause of crashes.

After making the changes, let us know.

 

[ivan495]

Deleted old and installed newest Graphics card drives. Replaced Avira with MSE and removed Asrock thing and Daemon tools and still get BSOD.

That link that you posted about wireless, that is not my PCI-e wireless card. I have D-Link DWL-G510 and newest driver for it.

Here is my new dump.

 

[Arc]

Ivan,
► still your crashes indicate to Linksys Wireless-G PCI Adapter.

fffff880`02f8a348  fffff880`03602501Unable to load image \SystemRoot\system32\DRIVERS\rt61.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for rt61.sys
*** [COLOR=Red]ERROR: Module load completed but symbols could not be loaded for rt61.sys
 rt61+0x2501[/COLOR]
=====================================================
mvm rt61
start             end                 module name
fffff880`03600000 fffff880`03673000   rt61     T (no symbols)           
    Loaded symbol image file: rt61.sys
    Image path: \SystemRoot\system32\DRIVERS\rt61.sys
    [COLOR=Red]Image name: rt61.sys
    Timestamp:        Tue Jun 02 15:05:28 2009[/COLOR] (4A24F260)
    CheckSum:         0006C736
    ImageSize:        00073000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

If you dont use it, uninstall it.

► Again, despite of being the latest version, it still crashes on ATI driver

fffff880`02f8ae68  fffff880`04852c74Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** [COLOR=Red]ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
 atikmdag+0x4fc74[/COLOR]

Try uninstalling and reinstalling it again, and do it, too.
http://www.sevenforums.com/tutorials/100356-video-card-stress-test-furmark.html

► Disable USB Selective Suspense, if it is enabled.
http://www.sevenforums.com/tutorials/147369-usb-selective-suspend-turn-off.html

fffff880`02f8b3c0  fffffa80`0395c1a0
fffff880`02f8b3c8  fffff880`03758960 [COLOR=Red]USBPORT!USBPORT_Core_iInsertPriorityTransferDirect+0x190[/COLOR]
fffff880`02f8b3d0  fffffa80`0395c050
fffff880`02f8b3d8  fffff880`037559b9 [COLOR=Red]USBPORT!USBPORT_TxSetState+0x1d[/COLOR]
fffff880`02f8b3e0  fffffa80`0395cd28
fffff880`02f8b3e8  fffff880`037485c2 [COLOR=Red]USBPORT!USBPORT_Xdpc_iSetState+0x2a[/COLOR]
fffff880`02f8b3f0  00000000`00000000
fffff880`02f8b3f8  00000000`00000008
fffff880`02f8b400  fffffa80`0395c050
fffff880`02f8b408  fffff880`03758aed [COLOR=Red]USBPORT!USBPORT_Core_iInsertPriorityTransfer+0x131[/COLOR]
fffff880`02f8b410  fffffa80`03fd7010
fffff880`02f8b418  fffff880`03748783 [COLOR=Red]USBPORT!USBPORT_Xdpc_iSignal+0xcb[/COLOR]

► And, whatever is your network driver, update it.

 

[ivan495]

No luck.
Disabled USB selective suspend, uinstalled new and installed older drivers, checked C drive (no errors), tested GPU with Furmark but only for a short time. No artifacts or any other error. My PCI Wireless card drivers are up to date. I dont know what to do.

I dont think its really a drivers problem. Everything worked fine before BIOS update. After BIOS update, i get this often BSODs.

My new dump.

 

[Arc]

So here it is :

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

[COLOR=Red]CLOCK_WATCHDOG_TIMEOUT (101)[/COLOR]
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000040, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff88002f64180, The PRCB address of the hung processor.
Arg4: 0000000000000002, 0.

Follow http://www.sevenforums.com/crash-lo...0x101-clock_watchdog_timeout-troubleshtg.html.

 

[ivan495]

So what should i do?
I already tested most of my hardware with prime95, memtest, Furmark and all passed. Should i re-flash BIOS and then return it do default settings?