Solved Is my network card fried?

bishop101

New member
Member
VIP
Local time
3:49 PM
Messages
110
Location
North
The network icon on the bottom right of the task bar appears crossed out.

If I open the network center it says I'm not connected to the internet or the LAN.

If I run the network diagnostic test it tells me that I need to install an adapter.

If I try to configure the network adapter (in network center) the page just stays blank as if it were trying to load but it never does.

In Device Manager under monitors no network device appears at all.

If I type 'ipconfig /all' under Local Area Connection the physical address appears as 00:00:00:00:00:00

If I type ipconfig /release and /renew it tells me that no adapter is available to perform the operation.

In my router the computer is no longer listed under the DHCP client list.

But the light on the Ethernet card on the back of the computer is still on.
 
Last edited:

My Computer

OS
Windows 7 Professional x64
CPU
AMD Phenom™ 9500 Quad-Core Processor
Motherboard
MCP61PM-HM (Nettle3)
Memory
8 GB DDR2 OCZ
Graphics Card(s)
Power Color 5750
Monitor(s) Displays
HP w2207h
Hard Drives
2x Seagate ST336032 0AS SCSI 326 GB,
WD Caviar Black 600 GB,
WD Caviar Black 1 TB
PSU
Corsair TX 650w
Case
Cooler Master 690 Advanced

My Computer

Computer type
Laptop
Computer Manufacturer/Model Number
Employer provided Dell Latitude
OS
W7 Pro SP1 64bit
CPU
i7
Memory
8GB
Graphics Card(s)
Intel HD Graphics
Hard Drives
crappy SSD
Antivirus
Employer mandated Symantec Endpoint Protection
Browser
Pale Moon 64bit, IE11 64bit & Chrome 64bit
One way to test would be to run another operating system from your CD/DVD drive and see it that OS can make the network adapter work.

I went out and got myself a Ethernet card worth $11 and it's working now.

The failed card was part of the mobo. Reading up some trouble shooting I came across some info that when some computers are taken over and are used as bots the network card appears deactivated as mine was. Which scares me a bit since I just finished setting up remote desktop on the PC a couple of weeks ago.

So I will definitely run a Linux live distro and see if the mobo adapter works. Ran some scans and nothing showed up.
 

My Computer

OS
Windows 7 Professional x64
CPU
AMD Phenom™ 9500 Quad-Core Processor
Motherboard
MCP61PM-HM (Nettle3)
Memory
8 GB DDR2 OCZ
Graphics Card(s)
Power Color 5750
Monitor(s) Displays
HP w2207h
Hard Drives
2x Seagate ST336032 0AS SCSI 326 GB,
WD Caviar Black 600 GB,
WD Caviar Black 1 TB
PSU
Corsair TX 650w
Case
Cooler Master 690 Advanced

My Computer

Computer type
Laptop
Computer Manufacturer/Model Number
Employer provided Dell Latitude
OS
W7 Pro SP1 64bit
CPU
i7
Memory
8GB
Graphics Card(s)
Intel HD Graphics
Hard Drives
crappy SSD
Antivirus
Employer mandated Symantec Endpoint Protection
Browser
Pale Moon 64bit, IE11 64bit & Chrome 64bit
This reminds me of an issue I had with on-board sound not working. I tried absolutely everything and finally a live ubunutu CD as a last resort to troubleshoot the hardware. Turns out on-board sound was just dead. My point: using a live linux system is a great last-resort when troubleshooting potentially faulty hardware.
 

My Computer

Computer type
PC/Desktop
Computer Manufacturer/Model Number
Build
OS
Windows 7 Profession x64
CPU
Intel Core i5
Motherboard
Intel DB75EN
Memory
16 GB DDR3
Graphics Card(s)
Intel HD Graphics
Sound Card
Realtek High Definition Audio
Monitor(s) Displays
Dual Viewsonic TD2220 touchscreen displays
Hard Drives
Seagate 500GB 7200 RPM
Case
Slimline
Cooling
Standard Intel heat sink / fan.
Keyboard
Microsoft boring keyboard - it works!
Back
Top