Issue after a W7 install.

[boyans]

What about installing to virtual machine - do you need Windows 32-bit for testing ?

 

[darkhorse]

I need windows 32, as I have 2 piece of hardwares, that only can run on 32bit due to the signed driver issue.

And the virtual machine is not at all an option, as I need the computer to be used with my SDR radio. I'm a hamradio amateur.

 

[theog]

Try installing with only 2gb of ram.

 

[darkhorse]

I only have 2 pieces of 4G each at the moment.
Will that do too ?

 

[theog]

You can try with one 4gb.

 

[darkhorse]

I'll do that, but ATM, I'm installing again per the link you gave me with Diskpart.

 

[darkhorse]

BTW, what should I take in action when I install on the UEFI mobo with it's uefi ?. I have read the info here, but I'm not seeing a clear meaning on how to.

 

[theog]

OK, just use the CLEAN command (no need to use CLEAN ALL)

I need windows 32, as I have 2 piece of hardwares, that only can run on 32bit due to the signed driver issue.

What is the hardware?

 

[Lemur]

The reason I asked about the uEFI BIOS is I wanted to know if you have OC'd it. If you haven't made any changes, then you should be good. It wouldn't hurt to peek at the bios to make sure everything is being recognized correctly.

 

[darkhorse]

During the DISKPART, I used the CLEAN ALL. Took a while, but to be sure now where I have encountered issues

The hardware is ASRock 970Extreme3 MOBO, with 8GB of RAM. The HDD is a 1TB Seagate SATA.
Need more info on hardware ?.

 

[darkhorse]

The reason I asked about the uEFI BIOS is I wanted to know if you have OC'd it. If you haven't made any changes, then you should be good. It wouldn't hurt to peek at the bios to make sure everything is being recognized correctly.

All ok fine . What to be aware for in the BIOS ?

 

[theog]

Need more info on hardware ?.

Yes, the hardware you have problems with.

I need windows 32, as I have 2 piece of hardwares, that only can run on 32bit due to the signed driver issue.

 

[darkhorse]

@theog

Ok. Its this hardware:

http://www-user.tu-chemnitz.de/~heha/bastelecke/Rund%20um%20den%20PC/USB2LPT/index.html.en

There is an info down the site, that links to a place, that gives info on how to switch off the signed driver.
I tried it, but even that the hardware didn't worked.

But in 32bit it works like a charm

 

[theog]

Most of these Converter From USB To Parallel cables, do not work.

 

[darkhorse]

You are quite right, but this one does. At least on 32bit.

 

[darkhorse]

Could you maybe give me brand, that works on WIN7-64bit ?.
A parallel port.

 

[theog]

Could you maybe give me brand, that works on WIN7-64bit ?.
A parallel port.

Sorry No.
I use a MOBO with a parallel port, when needed.

 

[darkhorse]

Ok, I have ordered one on ebay, and I hope this solve the issue.