James Cameron's AVATAR in DX10 (win7x64)

SLIICE

New member
Local time
7:47 PM
Messages
11
Afternoon forum,

Recently i have been playing James Cameron's AVATAR pc game and have been experiencing a few problems, so i thought i'd shear them with you just in-case you have solutions to fix them.

Right;

Running the game in DX9possess no problems with ultra high settings, full AA and at 1920*1200 res. However when i change it to DX10 with the same settings i run into a few problems. The games runs fine for about 5-10 minites then with no warning the display freezes but the game continuous, the only way to get out of this is to restart the game through task manager.

Note;
  • I have both patches installed for the game.
  • I have changed the display settings in DX10.
  • I have changed the res in DX10.
  • I have taken off the AA in DX10.
  • I have the latest drivers installed on the GPU's.
And still no change. This is the only game this happens on, Crysis, Crysis Warhead, COD2, Dirt 2, Borderlands, Fear, Fear 2, Command & Conquer 3 Tiberium Wars, Bioshock, Dead Space etc. all work fine.

Any ideas, or fixes would be much appreciated.

Sliice.

 

My Computer My Computer

At a glance

Windows 7 Ultimate [64bit]Intel Core 2 Quad CPU Q6700 @ 3.5GHz [Water C...4.00 GB OCZ DDR2 PC2-9600 Flex EX Series @ 11...3x 8800 GTX @ Ultra Settings [Water Cooled]
Computer Manufacturer/Model Number
Self Built
OS
Windows 7 Ultimate [64bit]
CPU
Intel Core 2 Quad CPU Q6700 @ 3.5GHz [Water Cooled]
Motherboard
XFX nForce 780i 3-Way SLI
Memory
4.00 GB OCZ DDR2 PC2-9600 Flex EX Series @ 1100MHz
Graphics Card(s)
3x 8800 GTX @ Ultra Settings [Water Cooled]
Sound Card
On Board + Razer Barracuda HP-1 Gaming Headphones
Monitor(s) Displays
BenQ 24"
Screen Resolution
1920x1200
Hard Drives
6x WD Raptor 36GB @ Raid 0
PSU
Antec 1100w PSU
Case
Thermaltake Armor
Cooling
Water Cooled
Keyboard
Razer Tarantula
Mouse
Razer Copper Head
Internet Speed
16mb/s download - 1.9mb/s upload (there or thereabouts)
Other Info
Nvidia 8800 GTX Rule. (36+ fps Crysis Bench Mark, DX10, 1920x1200, Ultra high settings, 4xAA)
Outdated drivers for your sound & video... even though you said the other games are not affected, you don't specify whether the other games are also played in full DX10.

Another thing you may want to check is if the driver for your BenQ supports x64 bit for vista or Win7, or you may want to upgrade the driver as well so you are not using a Generic driver.
 
Last edited:

My Computer My Computer

At a glance

Windows 7 x64 (Ultimate)Intel i5-4670K8GBs Ripjaws 2133MhzAsus GTX660 (2GBs)
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Custom Built... Intel/Nvidia/ASRock
OS
Windows 7 x64 (Ultimate)
CPU
Intel i5-4670K
Motherboard
ASRock Z87 Extreme 6
Memory
8GBs Ripjaws 2133Mhz
Graphics Card(s)
Asus GTX660 (2GBs)
Sound Card
Onboard Realtek HD
Monitor(s) Displays
Acer AL2216W
Screen Resolution
1680 x 1050
Hard Drives
Samsung 840 SSD 120GBs
Samsung 750GB 32MB cache
1.5 TB
PSU
PC Cooling 750w Silencer
Case
Thermaltake Spedo Advance
Cooling
Std Cooler
Keyboard
Logitech G15
Mouse
Logitech G9
Internet Speed
Comcast 20Mbit
Antivirus
Avast
Browser
Firefox
Thanks for the reply, i'll double check the drivers (again) but i'm quite sure that Crysis runs DX10, my whole computers bench marking is based around the Crysis bench mark software and i'm 100% certain that runs DX10.

I'll look into the Benq drivers if there are any?

Thanks again....

Will post if this resolves the problem.
 

My Computer My Computer

At a glance

Windows 7 Ultimate [64bit]Intel Core 2 Quad CPU Q6700 @ 3.5GHz [Water C...4.00 GB OCZ DDR2 PC2-9600 Flex EX Series @ 11...3x 8800 GTX @ Ultra Settings [Water Cooled]
Computer Manufacturer/Model Number
Self Built
OS
Windows 7 Ultimate [64bit]
CPU
Intel Core 2 Quad CPU Q6700 @ 3.5GHz [Water Cooled]
Motherboard
XFX nForce 780i 3-Way SLI
Memory
4.00 GB OCZ DDR2 PC2-9600 Flex EX Series @ 1100MHz
Graphics Card(s)
3x 8800 GTX @ Ultra Settings [Water Cooled]
Sound Card
On Board + Razer Barracuda HP-1 Gaming Headphones
Monitor(s) Displays
BenQ 24"
Screen Resolution
1920x1200
Hard Drives
6x WD Raptor 36GB @ Raid 0
PSU
Antec 1100w PSU
Case
Thermaltake Armor
Cooling
Water Cooled
Keyboard
Razer Tarantula
Mouse
Razer Copper Head
Internet Speed
16mb/s download - 1.9mb/s upload (there or thereabouts)
Other Info
Nvidia 8800 GTX Rule. (36+ fps Crysis Bench Mark, DX10, 1920x1200, Ultra high settings, 4xAA)
Crysis can run in DX10 but only if you ask it, if not it will default to dx9... Now, don't quote me on it, it has been a long time since I played crysis so I could be totally wrong in that assumption.

Sometimes, even if I have the latest drivers, after installing a game, the drivers will become corrupt or pitch a fit and only after uninstalling them and installing fresh copies of it, will my computer go back to normal. Again, this is my experience and I have no base or hard evidence to support this but... if this helps get your gaming back, does it matter? ;)
 

My Computer My Computer

At a glance

Windows 7 x64 (Ultimate)Intel i5-4670K8GBs Ripjaws 2133MhzAsus GTX660 (2GBs)
Computer type
PC/Desktop
Computer Manufacturer/Model Number
Custom Built... Intel/Nvidia/ASRock
OS
Windows 7 x64 (Ultimate)
CPU
Intel i5-4670K
Motherboard
ASRock Z87 Extreme 6
Memory
8GBs Ripjaws 2133Mhz
Graphics Card(s)
Asus GTX660 (2GBs)
Sound Card
Onboard Realtek HD
Monitor(s) Displays
Acer AL2216W
Screen Resolution
1680 x 1050
Hard Drives
Samsung 840 SSD 120GBs
Samsung 750GB 32MB cache
1.5 TB
PSU
PC Cooling 750w Silencer
Case
Thermaltake Spedo Advance
Cooling
Std Cooler
Keyboard
Logitech G15
Mouse
Logitech G9
Internet Speed
Comcast 20Mbit
Antivirus
Avast
Browser
Firefox
Back
Top