June 13, 2017 - KB4022719 (Monthly Rollup) for Windows 7

[Brink]

Improvements and fixes

This security update includes improvements and fixes that were a part of update KB4019265(released May 16, 2017) and also resolves the following issues:

• Addressed issue where, after installing KB3164035, users cannot print enhanced metafiles (EMF) or documents containing bitmaps rendered out of bounds using the BitMapSection(DIBSection) function.
• Addressed issue where updates were not correctly installing all components and would prevent them from booting.
• Addressed issue where an unsupported hardware notification is shown and Windows Updates not scanning, for systems using the AMD Carrizo DDR4 processor. For the affected systems, follow the steps in the Additional Information section to install this update.
• Security updates to Windows kernel, Microsoft Graphics Component, Microsoft Uniscribe, Windows kernel-mode drivers, the Windows OS, Windows COM, Internet Explorer and Windows Shell. For more information about the security vulnerabilities resolved, please refer to the Security Update Guide.

Known issues in this update

Microsoft is not currently aware of any issues with this update.

How to get this update

This update will be downloaded and installed automatically from Windows Update. To get the stand-alone package for this update, go to the Microsoft Update Catalog website.

• File information
  For a list of the files that are provided in this update, download the file information for update 4022719.

Additional Information

• Download KB4022719 from Microsoft update catalog.
• Extract the CAB file from the downloaded .msu file from step 1. Note the path where you stored the CAB file for use in step 3.
• Run the DISM /Online /Add-Package command to install the update: DISM.exe /Online /Add-Package /PackagePath: CAB file path from step 2.

Source: https://support.microsoft.com/en-us/help/4022719

See also: June 13, 2017 Security Update Guide - Microsoft Security Response Center (MSRC)


Direct download links for KB4022719 MSU file from Microsoft Update Catalog:

:ar: Download KB4022719 MSU for Windows 7 32-bit (x86) - 108.7 MB

:ar: Download KB4022719 MSU for Windows 7 64-bit (x64) - 181.3 MB

 

[Lady Fitzgerald]

Is there no Security Only update for June?

 

[Brink]

Yep,

June 13, 2017 - KB4022722 (Security-only update) Windows 7 - Windows 7 Help Forums

 

[Lady Fitzgerald]

Thanks, Shawn! Where dis you fond it. I tried to find it in the Microsoft catalog after I couldn't find it in the full rollup description from Microsoft (that's where I have been getting it). But, then again, I'm old and going senile.

 

[Brink]

I can understand that.

I had it posted in the "News" forum under this one.

 

[Lady Fitzgerald]

Totally missed it. Old age sucks!

Thanks!

 

[Layback Bear]

Old age is hard work. Getting older is not for the meek.

Jack

 

[Lady Fitzgerald]

Old age is hard work. Getting older is not for the meek.

Jack

Ain't for sissies, either.

 

[lffoar]

The best wines are old
Many a good tune can be played on an old violin
Ahhhhh, who am I kidding, getting old is a pain in the arse... and the back, and the knees, and the etc etc

 

[Lady Fitzgerald]

The best wines are old
Many a good tune can be played on an old violin
Ahhhhh, who am I kidding, getting old is a pain in the arse... and the back, and the knees, and the etc etc

You got that right!

 

[wedajm]

Hi! I don´t know why, but with this update my Logitech Performance MX stop to function properly. I can still use the mouse after restart but my computer can´t identify the mouse in the logitech mouse program. In other words the mouse speed is back to default and all the extra buttons sease to function.
I´ve tried so many times to reinstall the mouse drivers(setpoint) and with system restore but nothing seems to work.

What should I do ?

 

[Anak]

Hi wedajm,

In a case like yours what is usually done is to go to system restore and check if updates created a restore point before it applied the most recent update(s) if it did, run the restore point and then check if your machine has been restored to its accustom functionality. I would restart your machine.

If it has and you run the restore point, the next best thing to do is to install the security only update as shown in Brinks #3 post. At some point later on you can try to figure out or may hear news on why this month's full update affected mouse functions.

 

[wedajm]

Hi wedajm,

In a case like yours what is usually done is to go to system restore and check if updates created a restore point before it applied the most recent update(s) if it did, run the restore point and then check if your machine has been restored to its accustom functionality. I would restart your machine.

If it has and you run the restore point, the next best thing to do is to install the security only update as shown in Brinks #3 post. At some point later on you can try to figure out or may hear news on why this month's full update affected mouse functions.

Thank you !! I have restored and I hid the update until further notice. The mouse is once more working properly Thank you !

 

[Anak]

You're welcome.

I did find this:

Addressed a rare issue where mouse input can cease to function. The mouse pointer may continue to move, but movements and clicks produce no response other than a beeping noise.

Source: https://support.microsoft.com/en-us/help/4022726/windows-8-update-kb4022726

It's for win8 but may affect win7 also.

Looks like windows has a bit more to work on to address this issue. They fixed it in 8, but now it affects 7...Hmmm...

 

[wedajm]

You're welcome.

I did find this:
It's for win8 but may affect win7 also.

Looks like windows has a bit more to work on to address this issue. They fixed it in 8, but now it affects 7...Hmmm...

Thanks for the post. I´ll keep this update hidden until Microsoft has it fixed

 

[michael diemer]

Things like this are why I only do the Security Update.

 

[Lady Fitzgerald]

Things like this are why I only do the Security Update.

 

[CADesertRat]

I always do the Security Only updates also. Be aware that if you do the IE 11 "stand alone" update along with the Security only update, there is a printing problem reported in IE 11.
https://www.********.com/2017/win7-monthly-rollup-kb-4022719-triggers-printing-problems-in-internet-explorer/

 

[michael diemer]

No problem, I don't use IE. I only update it on the advice of folks here who say it's so integrated into Windows that you're better off keeping it current.

 

[SCANNERMAN777]

Ayeeeup!