Just installed new win 7 ultima os

[kaschiro]

I have a dell inspinon 17r n7110...I just change to a samsung ssd hd and this thing really rocks! 15 sec boot time. I installed a new system, win 7 ultima and of course it was using it own drivers

Since it originally had the dell drivers in and now it has the generic W7 files in it, should I replace the the dell drivers? If so which ones?, so far I had to change out the display files. every thing seems to be working pretty good.

The dvd/cd does not autostart when I put in a cd disk, I have to go into explorer and click on startup, it used to be that is auto started when a disk was put in

Any suggestions?
regards,
Kas

 

[maxie]

Hi there .. Since your OS is working perfectly i would tend to leave it as it is .. As for your DVD player try the Driver from the Dell website ...

 

[AddRAM]

Just run windows update.

It`s a Dell, they tend to prefer the drivers from Dell

 

[kaschiro]

Just run windows update.

It`s a Dell, they tend to prefer the drivers from Dell

I think I tried that it did not work, unless I did not push/click on the right buttons..when I ran it seems to take a long time and then the program just stops

I checked the hardward program and the only thing that is not cleared/check is SM BUS CONTROL I could not find find it..unless I am looking in the wrong Place

Need a hand
Kas

 

[maxie]

Hi there .. You need the Chipset Driver from Dell website ...

 

[kaschiro]

Hi there .. You need the Chipset Driver from Dell website ...

Which one do I choose, where do I look in the hardware section
Kas

 

[maxie]

Hi there ... It should be the Intel Huron River (HM67), v.9.2.0.1015, A00 ... If your USB 3 Ports need Drivers you will find them in the Link below ....

Drivers & Downloads | Dell US

 

[kaschiro]

Hi there ... It should be the Intel Huron River (HM67), v.9.2.0.1015, A00 ... If your USB 3 Ports need Drivers you will find them in the Link below ....

Drivers & Downloads | Dell US

Thanks, for the up date....I am not the brightest knife in the drawer, under which category am I going find the drivers for the usb 3
Kas

 

[maxie]

They are listed under the Chipset section