Kernel Power Error ID 41

[Kyuutoryu]

Hi I'm new to the forums. Really pissed off with this Kernel Power error I'm not sure what I'm suppose to post can someone guide me along please thanks.

PS:I tried re-enabling hibernation but it didn't work.

PSS:Tried reformatting com too. Been trying to fix this for hours. Someone help please. :/

PSSS:This is a newly built com. All the parts are new.

 

[Kyuutoryu]

I think I'm suppose to post this two?...

The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>2</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2010-12-05T14:24:48.892814800Z" />
<EventRecordID>3897</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>Jingyu-PC</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">false</Data>
<Data Name="PowerButtonTimestamp">0</Data>
</EventData>
</Event>





The previous system shutdown at 10:23:07 PM on ‎2010/‎12/‎05 was unexpected.

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="EventLog" />
<EventID Qualifiers="32768">6008</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-12-05T14:24:55.000000000Z" />
<EventRecordID>3893</EventRecordID>
<Channel>System</Channel>
<Computer>Jingyu-PC</Computer>
<Security />
</System>
- <EventData>
<Data>10:23:07 PM</Data>
<Data>‎2010/‎12/‎05</Data>
<Data />
<Data />
<Data>8722</Data>
<Data />
<Data />
<Binary>DA070C0000000500160017000700BE01DA070C00000005000E0017000700BE01600900003C000000010000006009000000000000B00400000100000000000000</Binary>
</EventData>
</Event>

 

[Kyuutoryu]

Bump. Added dump. Someone please help me

 

[Kari]

Please read this: http://www.sevenforums.com/crash-lockup-debug-how/72883-what-kernel-power-error-id-41-a.html

Kari

 

[Kyuutoryu]

Please read this: http://www.sevenforums.com/crash-lockup-debug-how/72883-what-kernel-power-error-id-41-a.html

Kari

"When posting and asking help, please tell what your Event Viewer has logged just before the Kernel 41."

I already did... It's the 2nd half of the 2nd post...

 

[Jonathan_King]

Hello,

In my experience, the Kernel Power Error 41 is usually caused by hardware; however, I am seeing network errors, so let's start with those.

Event[8]:
  Log Name: System
  Source: Tcpip
  Date: 2010-12-05T23:52:52.366
  Event ID: 4227
  Task: N/A
  Level: Warning
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Jingyu-PC
  Description: 
TCP/IP failed to establish an outgoing connection because the selected local endpoint was recently used to connect to the same remote endpoint. This error typically occurs when outgoing connections are opened and closed at a high rate, causing all available local ports to be used and forcing TCP/IP to reuse a local port for an outgoing connection. To minimize the risk of data corruption, the TCP/IP standard requires a minimum time period to elapse between successive connections from a given local endpoint to a given remote endpoint.

Event[299]:
  Log Name: System
  Source: Microsoft-Windows-Time-Service
  Date: 2010-12-05T20:33:03.363
  Event ID: 134
  Task: N/A
  Level: Warning
  Opcode: Info
  Keyword: N/A
  User: S-1-5-19
  User Name: NT AUTHORITY\LOCAL SERVICE
  Computer: Jingyu-PC
  Description: 
NtpClient was unable to set a manual peer to use as a time source because of DNS resolution error on ''. NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: The requested name is valid, but no data of the requested type was found. (0x80072AFC)

I would suggest that you remove Avast first, using this tool: http://files.avast.com/files/eng/aswclear5.exe

Replace it with MSE: http://www.microsoft.com/security_essentials

Install these updated Realtek Ethernet drivers too: Realtek

Also, what is the make and model of your PSU?

 

[Kyuutoryu]

Hello,

In my experience, the Kernel Power Error 41 is usually caused by hardware; however, I am seeing network errors, so let's start with those.

Event[8]:
  Log Name: System
  Source: Tcpip
  Date: 2010-12-05T23:52:52.366
  Event ID: 4227
  Task: N/A
  Level: Warning
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Jingyu-PC
  Description: 
TCP/IP failed to establish an outgoing connection because the selected local endpoint was recently used to connect to the same remote endpoint. This error typically occurs when outgoing connections are opened and closed at a high rate, causing all available local ports to be used and forcing TCP/IP to reuse a local port for an outgoing connection. To minimize the risk of data corruption, the TCP/IP standard requires a minimum time period to elapse between successive connections from a given local endpoint to a given remote endpoint.

Event[299]:
  Log Name: System
  Source: Microsoft-Windows-Time-Service
  Date: 2010-12-05T20:33:03.363
  Event ID: 134
  Task: N/A
  Level: Warning
  Opcode: Info
  Keyword: N/A
  User: S-1-5-19
  User Name: NT AUTHORITY\LOCAL SERVICE
  Computer: Jingyu-PC
  Description: 
NtpClient was unable to set a manual peer to use as a time source because of DNS resolution error on ''. NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: The requested name is valid, but no data of the requested type was found. (0x80072AFC)

I would suggest that you remove Avast first, using this tool: http://files.avast.com/files/eng/aswclear5.exe

Replace it with MSE: http://www.microsoft.com/security_essentials

Install these updated Realtek Ethernet drivers too: Realtek

Also, what is the make and model of your PSU?

Firstly, thanks for replying I'm gonna try removing Avast and replacing it with MSE now. Secondly, I think I included my PSU in my system specs? o-o

 

[Jonathan_King]

Thanks, I must admit I don't even check that anymore. So few people do it, I just got into the habit of asking all the time.

Good job on the specs, too bad all aren't like you.

 

[Kyuutoryu]

Installed MSE and doing a quick scan now. Installed the Realtek driver too. And yeah sometimes my modem dcs for idk what reasons. Now what do I do? Wait and see it if it still crashes? ><

 

[Kyuutoryu]

My com crashed again. :\ Here are the new dump files....

 

[Jonathan_King]

Try running Prime95: http://www.sevenforums.com/tutorials/100352-cpu-stress-test-prime95.html

Do you have access to another PSU?

 

[Kyuutoryu]

Try running Prime95: http://www.sevenforums.com/tutorials/100352-cpu-stress-test-prime95.html

Do you have access to another PSU?

No I don't have another PSU Regarding the Prime95, 5. Keep an eye on your temperatures, and stop the test if the machine starts to overheat. How hot exactly is counted as overheating? And once a error pops out I stop the test?

PS:Can I do other stuff while the test runs? Like game or msn?

PS:I just started it and speedfan is already showing the "fire" icon... http://i211.photobucket.com/albums/bb301/jingyuwong/prime95speedfan.jpg

 

[Jonathan_King]

I would be concerned if the CPU went much over 70 C. Don't worry about Speedfan's flame icons.

If an error occurs, you can stop the test.

There is no harm in doing other stuff while the test runs. You may find the system very slow, however.

 

[Kyuutoryu]

I would be concerned if the CPU went much over 70 C. Don't worry about Speedfan's flame icons.

If an error occurs, you can stop the test.

There is no harm in doing other stuff while the test runs. You may find the system very slow, however.

Yes I tried gaming but it was so slow I gave up. You came back at the right timing The Prime95 test has ran for almost 12 hours and not a single error. Is that good or bad? :\

http://i211.photobucket.com/albums/bb301/jingyuwong/Untitled.jpg

 

[Jonathan_King]

That's good; I would consider the CPU to be good, as far as we can test it.

I'm interested to see if the network errors are gone yet. Could you upload a new jcgriff2 report for us?

Finally, is it possible that you could purchase a new PSU from a computer components store? Make sure they will allow you to return it, if you don't need it.

 

[Jonathan_King]

I see another error:

Event[1056]:
  Log Name: System
  Source: Microsoft Antimalware
  Date: 2010-12-07T08:21:50.000
  Event ID: 3002
  Task: N/A
  Level: Error
  Opcode: Info
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Jingyu-PC
  Description: 
Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
     Feature: Behavior Monitoring
     Error Code: 0x80004005
     Error description: Unspecified error 
     Reason: The filter driver requires an up-to-date engine in order to function. You must install the latest definition updates in order to enable real-time protection.

Open MSE, update to the latest definitions, and then run a Full scan.

Carry on with the PSU change, if at all possible. Also, if you can bring yourself to spend the day offline, you might also consider disabling your network adapter in Device Manager.

 

[Kyuutoryu]

I see another error:

Event[1056]:
  Log Name: System
  Source: Microsoft Antimalware
  Date: 2010-12-07T08:21:50.000
  Event ID: 3002
  Task: N/A
  Level: Error
  Opcode: Info
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: Jingyu-PC
  Description: 
Microsoft Antimalware Real-Time Protection feature has encountered an error and failed.
     Feature: Behavior Monitoring
     Error Code: 0x80004005
     Error description: Unspecified error 
     Reason: The filter driver requires an up-to-date engine in order to function. You must install the latest definition updates in order to enable real-time protection.

Open MSE, update to the latest definitions, and then run a Full scan.

Carry on with the PSU change, if at all possible. Also, if you can bring yourself to spend the day offline, you might also consider disabling your network adapter in Device Manager.

Hmm the MSE is already up to date? o.o I'll run a full scan now. What PSU do you recommend? I bought all my stuff from here...http://fuwell.com.sg/uploads/misc/Fuwell271110.pdf

PS:Strange enough, during the 12 hours of stress testing my com didn't crash o-o

 

[Jonathan_King]

If the PSU is a little spotty, that may explain why it didn't crash during the 12 hours of testing.

 

[Kyuutoryu]

Okay MSE done. Nothing came up.

Cousin recommended testing out any 3d game that is cpu and power consuming and see whether it will crash. So I'm downloading crysis demo atm.

 

[Kyuutoryu]

I found this from another thread...

It is really interesting that so many people experince the same kind of problems, and the other interesting thing is that the configurations with Bsods are all new like mine.I have a Gigabyte P55 chipset board and choosing XMP(Extreme Memory Profile) which automatically adjusts the frequency and voltage of rams and processor seems to work for me since I haven't had bsods till then, it may be worth trying....

Should I try this?